STMicroelectronics

STM32F205RBT6 - 120MHz Cortex-M3 128KB MCU | STMicroelectronics

MPN: STM32F205RBT6 ✗ סוף ייצור
2.5 V or 3.3 V Vdss 64-pin LQFP Package 120 MHz Speed 128 KB Memory
כמות הזמנה מינימלית: 1 |

STM32F205RBT6 סקירה

The STMicroelectronics STM32F205RBT6 is a 32-bit Arm Cortex-M3 microcontroller operating at up to 120 MHz, with 128 KB of Flash memory and a 64-pin LQFP package measuring 10 mm by 10 mm. It belongs to the STM32F20x high-performance microcontroller family and combines real-time control capability with extensive connectivity-oriented peripherals.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one integrated circuit. In the technology hierarchy, the STM32F205RBT6 is an Arm Cortex-M3 MCU, a 32-bit RISC embedded processor, and a member of the broader microcontroller and embedded-processing semiconductor category. Its architecture supports deterministic control while reducing the component count required for industrial, communications, and automation equipment.

The principal specifications include a 120 MHz maximum core frequency, 128 KB of Flash program memory, 32-bit processing, and operation from 2.5 V or 3.3 V supply rails as identified for this ordering code. The 64-LQFP package provides a conventional 10 mm by 10 mm surface-mount footprint. These characteristics make the device suitable for designs that require meaningful firmware storage and faster control-loop execution than entry-level Cortex-M microcontrollers.

The STM32F20x family is based on the Arm Cortex-M3 core and is positioned for high-performance embedded applications. The manufacturer describes the family as operating at up to 120 MHz. Compared with a basic 8- or 16-bit controller, the 32-bit architecture supports wider data paths, more efficient digital filtering, and more capable communications firmware, although actual performance still depends on clock configuration, memory latency, peripheral configuration, and firmware quality.

Typical uses include industrial control, IoT equipment, embedded automation, motor-control systems, metering instruments, communications equipment, and compact low-power board designs. The 120 MHz clock is useful for protocol handling and time-critical control, while 128 KB of Flash can store application code, configuration data, and bootloader logic. Developers must still allocate RAM, stack space, and Flash carefully when planning concurrent tasks and protocol stacks.

A practical design consideration is power and signal integrity. The LQFP package requires short, properly terminated clock and high-speed signal routes, adequate decoupling near the supply pins, and careful ground-return planning. Firmware should be tested at the intended clock, voltage, and temperature limits because timing margin and peripheral behavior can differ across operating conditions.

This page combines the exact STM32F205RBT6 ordering information with an engineering-oriented overview, application guidance, comparison parameters, and practical replacement considerations. It also distinguishes true same-package alternatives from parts that may be functionally related without being immediate PCB drop-in replacements.

חלופות תחליף ישיר עבור STM32F205RBT6 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם STM32F205RBT6 (אותו גורם צורה וטביעת רגל) — שונים ב Package, Flash Memory, SRAM, Mounting Type, Communication Interfaces.

STMicroelectronics
Package: 64-LQFP (10 x 10 mm)
Flash Memory: 256 KB (256K x 8)
SRAM: 64 KB
השווה עם STM32F205RBT6 →
STMicroelectronics
Package: 64-LQFP (10x10 mm, 0.5 mm pitch)
SRAM: 132 KB (128 KB + 4 KB backup)
Mounting Type: Surface Mount (Tray)
השווה עם STM32F205RBT6 →
STMicroelectronics
Package: LQFP64 (10x10 mm)
Flash Memory: 1 MB
SRAM: 128 KB
השווה עם STM32F205RBT6 →

STM32F205RCT6

✅ Drop-In ⚠️ מפרטים לא מאומתים
STMicroelectronics
📦 64-pin LQFP
ARM Cortex-M3 (32-bit) · 32-bit · 120 MHz · 150 DMIPS (1.25 DMIPS/MHz) · 256 KB (256K x 8) · 64 KB · 1.8 V to 3.6 V · 2.5 V / 3.3 V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

STM32F207RBT6

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 64-pin LQFP
CPU frequency remains 120 MHz and Flash remains 128 KB, while the STM32F207 line adds connectivity features that require peripheral-map verification.

📋 חלופה להתייחסות (לא בקטלוג)

STM32F207RCT6

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 64-pin LQFP
Flash increases from 128 KB to 256 KB, a 100% increase; the STM32F207 peripheral set differs while the 120 MHz core and LQFP-64 footprint remain.

📋 חלופה להתייחסות (לא בקטלוג)

STM32F205RET6

✅ Drop-In ⚠️ מפרטים לא מאומתים
STMicroelectronics
📦 64-pin LQFP
ARM Cortex-M3 32-bit RISC · 120 MHz · 150 DMIPS / 1.25 DMIPS/MHz · Yes (0-wait-state Flash execution) · 512 KB · 132 KB (128 KB + 4 KB backup) · 51 · 64-LQFP (10x10 mm, 0.5 mm pitch)

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

STM32F207RET6

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 64-pin LQFP
Flash increases from 128 KB to 512 KB, a 300% increase, and the STM32F207 peripheral set differs; the core speed and LQFP-64 footprint remain unchanged.

📋 חלופה להתייחסות (לא בקטלוג)

STM32F205RBT6 דירוגים מרביים ומאפיינים חשמליים

Product Type 32-bit Arm Cortex-M3 microcontroller
Maximum CPU Frequency 120 MHz
Flash Memory 128 KB
Flash Organization 128K x 8 bits
CPU Architecture 32-bit RISC
Core Arm Cortex-M3
מתח אספקה 2.5 V or 3.3 V
מארז 64-pin LQFP
Package Dimensions 10 mm x 10 mm
מספר פינים 64 pins
סוג הרכבה Surface mount
Series STM32F2

מדריך תצורת פינים של STM32F205RBT6 10 mm x 10 mm

תצורת פינים עבור STM32F205RBT6 (מארזת 10 mm x 10 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 10 mm x 10 mm עבור STM32F205RBT6

אין נתוני פריסת פינים מפורטים עבור STM32F205RBT6.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

STM32F205RBT6 מתאים עבור 6 יישוםs: Industrial Automation Controller, IoT Gateway and Sensor Hub, Motor Control and Power Conversion, Communications Equipment, Metering and Data Acquisition, Embedded Networking Bridge.

🏭

Industrial Automation Controller

The STM32F205RBT6 suits an industrial automation controller because its 120 MHz 32-bit Cortex-M3 core provides useful control-loop and communications headroom, while 128 KB of Flash accommodates application logic, configuration, and a small bootloader. In a PLC-style controller, the MCU could coordinate digital inputs, outputs, timers, and communication tasks while maintaining predictable behavior across multiple control loops. The 64-pin LQFP package provides access to a broad peripheral complement on a conventional surface-mount footprint. Before schematic release, allocate pins from the manufacturer package table, reserve pins for debug and boot control, and validate every peripheral function against the STM32F205RB datasheet.

🧩

IoT Gateway and Sensor Hub

The STM32F205RBT6 can serve as the processing center of an IoT sensor hub that combines local control with network-facing firmware. Its 120 MHz Arm Cortex-M3 core can manage protocol state machines, data acquisition, filtering, and configuration updates, while 128 KB of Flash provides space for a compact gateway application and secure update logic. The MCU belongs to a family designed for high-performance embedded use rather than minimal sensor-node operation. Designers should verify the exact Ethernet, USB, serial-interface, and DMA resources in the device documentation, while keeping sensitive communications and high-speed routing away from analog and clock circuitry.

⚡

Motor Control and Power Conversion

The STM32F205RBT6 is appropriate for compact motor-control or power-conversion subsystems where deterministic digital control must coexist with timing-sensitive feedback processing. A 120 MHz core reduces the execution interval available to sampling, filtering, and control-law calculations, and the 32-bit architecture supports fixed-width arithmetic used in many motor-control algorithms. The device can coordinate timers, PWM outputs, encoder or sensor inputs, and supervisory logic, subject to the exact peripheral assignments listed in the manufacturer datasheet. Keep high-current switching paths isolated from the MCU, use defined grounding and decoupling arrangements, and validate timing at the maximum operating frequency and supply conditions.

🌐

Communications Equipment

The STM32F205RBT6 fits communications equipment requiring more processing capacity than a low-end microcontroller and more program storage than many basic 8-bit controllers. Its 120 MHz Cortex-M3 architecture supports protocol framing, buffer management, and time-critical interface servicing, while the 64-pin LQFP package offers sufficient physical connections for several serial or parallel peripheral assignments. The STM32F20x family is explicitly positioned for high-performance embedded systems. Before layout, identify which communication peripherals are present on the exact RBT6 ordering code, reserve pins for debugging and boot mode control, and apply manufacturer timing recommendations to every high-speed interface.

📟

Metering and Data Acquisition

The STM32F205RBT6 can be used in metering and data-acquisition equipment that combines sensor conditioning, digital filtering, calibration, and a communications interface. The 120 MHz processor supports efficient acquisition-loop execution and 32-bit arithmetic, while 128 KB of Flash can hold the measurement application, parameter tables, and diagnostics. Its 64-pin LQFP package is convenient for prototype and production boards requiring a conventional exposed-lead footprint. Designers should partition analog and digital ground and supply paths carefully, isolate high-impedance sensor channels from switching nodes, and review the electrical characteristics for the selected sensor and interface voltages.

🔗

Embedded Networking Bridge

The STM32F205RBT6 is a practical controller for an embedded bridge between a local serial or field bus and an Ethernet-based network, provided the required peripherals are confirmed in the exact device configuration. Its 120 MHz core supports concurrent protocol processing and local handling, while the 128 KB Flash capacity accommodates gateway logic, a bootloader, and configuration management. The STM32F207 family may be preferable where its expanded connectivity set aligns with the design, but the STM32F205 remains useful when its existing resources are sufficient. Ethernet magnetics, line-driver interfaces, clock sources, and high-speed signal routing require careful PCB partitioning and tested termination.

סיכום מוצרים מומלצים

STM32F205RCT6 STMicroelectronics בשימוש ב-: Industrial Automation Controller, IoT Gateway and Sensor Hub, Motor Control and Power Conversion, Metering and Data Acquisition, Embedded Networking Bridge STM32F207RBT6 Same-package STM32F2 family option for additional connectivity requirements בשימוש ב-: Industrial Automation Controller, IoT Gateway and Sensor Hub, Communications Equipment, Metering and Data Acquisition, Embedded Networking Bridge STM32F205RET6 STMicroelectronics בשימוש ב-: Motor Control and Power Conversion STM32F207RCT6 Same-package connectivity option with 256 KB Flash בשימוש ב-: Communications Equipment
STM32F205RBT6 datasheet
The STM32F205RBT6 datasheet is the manufacturer document covering the STM32F205xx and STM32F207xx microcontroller lines. The device uses a 32-bit Arm Cortex-M3 core, operates at up to 120 MHz, and provides 128 KB of Flash in a 64-pin LQFP package. Download the PDF from the manufacturer link on this page, then use its pin-description, electrical-characteristics, and ordering-information tables during schematic capture and PCB review.
What are the key specifications of STM32F205RBT6 that engineers should know?
The STM32F205RBT6 is a 120 MHz, 32-bit Arm Cortex-M3 microcontroller with 128 KB of Flash and a 64-pin LQFP package. Its ordering code supports 2.5 V or 3.3 V operation and uses a 10 mm by 10 mm surface-mount package. These values establish the processor, memory, electrical-supply, and footprint constraints for the design. Confirm SRAM, peripheral details, and temperature limits in the manufacturer datasheet before finalizing the system architecture.
What is the operating frequency of STM32F205RBT6?
The STM32F205RBT6 operates at a maximum frequency of 120 MHz using its Arm Cortex-M3 core. STMicroelectronics identifies the STM32F20x family as a high-performance Cortex-M3 line capable of running at up to 120 MHz. Actual operating frequency depends on the device configuration, supply voltage, clock source, firmware settings, and the electrical conditions of the individual board.
How much Flash memory does STM32F205RBT6 contain?
The STM32F205RBT6 contains 128 KB of Flash memory, organized as 128K by 8 bits. The manufacturer product listing identifies this capacity as part of the STM32F205RBT6 configuration. This is more program storage than many compact Cortex-M devices, but firmware planning must also reserve space for bootloader updates, calibration data, and application code while preserving room for future revisions.
What package and pin count does STM32F205RBT6 use?
The STM32F205RBT6 uses a 64-pin LQFP package measuring 10 mm by 10 mm. STMicroelectronics lists the ordering code as a 64-LQFP device, and an independent distributor listing also identifies the tray package. The 64-pin count determines the package footprint and the number of physical PCB connections, while the B suffix identifies the 128 KB Flash configuration within the STM32F205RB family.
Where can I find the STM32F205RBT6 pinout?
The STM32F205RBT6 pinout is found in the pin-description and package drawings in the manufacturer datasheet for the STM32F205RB family. Use that table to assign every LQFP-64 signal, including supply, ground, reset, clock, boot, debug, and peripheral functions. Do not infer an unused signal from a generic STM32 board because peripheral mapping and alternate-function details must match the exact package and device revision.
Is STM32F205RBT6 suitable for industrial control and automation equipment?
Yes, the STM32F205RBT6 is suitable for industrial control and embedded automation designs that need a 120 MHz 32-bit core, 128 KB of Flash, and a conventional 64-pin LQFP footprint. Its combination of processing performance and package availability supports deterministic control and communications firmware. Industrial qualification, extended-temperature requirements, isolation, EMC, and safety obligations should be verified separately for the finished system.
STM32F205RBT6 vs STM32F205RCT6 - which is better for a new design?
The STM32F205RCT6 provides 256 KB of Flash, twice the 128 KB in the STM32F205RBT6, while both use the 64-pin LQFP footprint and the same STM32F205RB family architecture. Choose the RCT6 when firmware size, update images, or local data storage require more program memory. Choose the RBT6 when 128 KB is sufficient and the lower-memory configuration better matches the design.
STM32F205RBT6 vs STM32F207RBT6 - which one should I choose?
The STM32F207RBT6 is the better candidate when a design needs the additional connectivity features associated with the STM32F207 line, while the STM32F205RBT6 remains appropriate when its existing 120 MHz Cortex-M3 performance and peripheral set meet the requirements. Both are 64-pin LQFP STM32F2-family devices with 128 KB of Flash, but their exact peripheral maps must be compared before treating the choice as a drop-in substitution.
When should I choose STM32F205RBT6 over STM32F205RCT6?
Choose the STM32F205RBT6 when the application firmware, bootloader, and planned updates can remain within 128 KB of Flash and the 64-pin LQFP layout is otherwise acceptable. Select the STM32F205RCT6 when additional code space materially reduces firmware pressure because it offers 256 KB of Flash. Both retain the same core frequency and package family, so memory capacity and peripheral requirements should drive the decision.
What is the best drop-in replacement for STM32F205RBT6?
The closest same-family drop-in candidates are STM32F205RCT6 and STM32F207RBT6 because they retain the 64-pin LQFP footprint and 120 MHz Cortex-M3 architecture, but each requires a controlled engineering review. The RCT6 changes Flash capacity to 256 KB, while the F207 device changes the peripheral feature set. A cross-manufacturer replacement should not be assumed merely because another 64-pin Cortex-M3 MCU uses a similar land pattern.
Can STM32F205RBT6 be replaced by a GD32 or other Cortex-M3 MCU?
A GD32 or other Cortex-M3 MCU cannot automatically replace the STM32F205RBT6 merely by matching the processor family and package. The replacement must preserve all 64 electrical connections, power behavior, peripheral assignments, clock strategy, boot operation, and firmware requirements. Cross-brand MCU equivalence requires pin-by-pin schematic review, timing validation, peripheral testing, and a controlled firmware migration rather than a distributor cross-reference result alone.
Where to buy STM32F205RBT6 online?
Use the Request a Quote form on this page to request STM32F205RBT6 availability, lead time, and order handling from XAIPART. The exact ordering code is STM32F205RBT6, including the 128 KB Flash configuration, 64-pin LQFP package, and tray packaging. Providing the complete MPN when requesting a quotation helps avoid accidental substitution of a reel-packed or different Flash-density ordering code.
What is the price of STM32F205RBT6?
The current commercial terms for STM32F205RBT6 are shown through the Request a Quote form on this page rather than in static narrative text. Submit the exact MPN and required quantity to obtain current pricing, availability, and lead-time information. Confirm whether the required delivery format is the STM32F205RBT6 tray version or a tape-and-reel ordering code before accepting the quotation.
Is STM32F205RBT6 in stock and what is its lead time?
Stock and lead time for the STM32F205RBT6 should be confirmed through the Request a Quote form on this page. The manufacturer product page identifies STM32F205RB as an STM32F20x device, but current inventory can vary by ordering code and delivery format. Provide the requested quantity and packaging requirement so the quotation can reflect the precise STM32F205RBT6 configuration.

נתוני עזר הנדסיים עבור STM32F205RBT6 — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the STM32F205RBT6 when a design needs a 120 MHz 32-bit Cortex-M3 core, 128 KB of Flash, and a 64-pin LQFP footprint for industrial control, communications, metering, or embedded automation. Select the STM32F205RCT6 when larger code images or update requirements justify doubling Flash to 256 KB without changing the package family. Consider the STM32F207RBT6 when its additional connectivity resources are required and its exact peripheral assignments pass schematic review; the STM32F207RCT6 combines that line with 256 KB of Flash. The 512 KB STM32F205RET6 and STM32F207RET6 are appropriate for substantially larger firmware while retaining the LQFP-64 land pattern. None should be treated as an automatic substitution: validate pin functions, clocking, boot behavior, supply requirements, and firmware before production release.

השוואה עם חלופות

פרמטר מוצר זה STM32F205RCT6 STM32F207RBT6 STM32F207RCT6 STM32F205RET6 STM32F207RET6
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 64-pin LQFP 64-pin LQFP 64-pin LQFP 64-pin LQFP 64-pin LQFP 64-pin LQFP
Core Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3
Maximum CPU Frequency 120 MHz 120 MHz 120 MHz 120 MHz 120 MHz 120 MHz
Flash Memory 128 KB 256 KB 128 KB 256 KB 512 KB 512 KB
Product Series STM32F205 STM32F205 STM32F207 STM32F207 STM32F205 STM32F207
Special Features STM32F2 high-performance Cortex-M3 family STM32F2 family with higher Flash capacity STM32F207 connectivity-oriented family STM32F207 family with higher Flash capacity STM32F205 family with 512 KB Flash STM32F207 family with 512 KB Flash

מבדילים עיקריים

  • Lower Flash configuration for designs with controlled firmware demand (לעומתSTM32F205RCT6)
  • Exact 128 KB Flash retention within the STM32F207 option (לעומתSTM32F207RBT6)
  • Focused STM32F205 feature set for general high-performance embedded designs (לעומתSTM32F207RET6)

הערות תכנון

Place the required input and bypass capacitors close to the STM32F205RBT6 supply and ground pins, following the capacitance and placement recommendations in the manufacturer datasheet. Keep the 2.5 V or 3.3 V supply rail within the device's permitted operating range and account for startup current, clock-source load, and peripheral activity. Use a quiet source for sensitive analog sections and separate noisy switching or motor-return currents from the MCU reference network.

Design the board around the 64-pin LQFP footprint and verify pin 1 orientation against the manufacturer package drawing before releasing artwork. Reserve the debug and boot-control pins even if a production programming method differs from the development system. Maintain short clock routes, provide a continuous ground reference beneath and around the device where practical, and route high-speed or switching signals away from precision analog inputs.

Do not treat another Cortex-M3 MCU as an automatic replacement because processor architecture alone does not guarantee peripheral, clock, boot, or electrical compatibility. Before substituting STM32F205RCT6, STM32F207RBT6, or another LQFP-64 candidate, compare every pin, alternate function, power pin, reset behavior, boot configuration, and peripheral instance. Re-run firmware, timing, boundary, and production-test validation after any substitution.

Clock and communication signals require short, controlled-impedance routes where applicable, with return-current paths kept continuous. Avoid routing high-speed edges beneath noisy power stages or across split ground planes. If the design uses an external crystal or oscillator, follow the manufacturer guidance for grounding, load capacitance, and nearby components so startup margin and clock accuracy remain consistent across production boards.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

Compliance status was not identified in the manufacturer or distributor excerpts used for this page. The MCU is not presented as an AEC-Q100-qualified automotive device.

הנתונים אומתו בתאריך: 2026-11-15 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

stm32f205rbt6 datasheet STM32F205RBT6 datasheet pdf STM32F205RBT6 pinout STM32F205RBT6 specifications STM32F205RBT6 120MHz Cortex-M3 STM32F205RBT6 128KB Flash STM32F205RBT6 LQFP-64 STM32F205RBT6 vs STM32F205RCT6 STM32F205RBT6 equivalent STM32F205RBT6 replacement STM32F205RBT6 price STM32F205RBT6 stock STMicroelectronics STM32F205RBT6 STM32F205RBT6 application circuit STM32F205RBT6 industrial control

רכיבים ומונחים קשורים

STMicroelectronics STM32F205RBT6 STM32F205RCT6 STM32F207RBT6 STM32F207RCT6 STM32F205RET6 STM32F207RET6 Arm Cortex-M3 32-bit RISC microcontroller embedded processor STM32F20x STM32F2 128 KB Flash 120 MHz LQFP-64 surface mount industrial control embedded automation motor control IoT metering communications equipment 2.5 V 3.3 V
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר