STM32F413ZHT6 - 100MHz Cortex-M4 MCU | STMicroelectronics
MPN: STM32F413ZHT6 ✓ פעילSTM32F413ZHT6 סקירה
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces onto one package. It sits within the embedded-controller hierarchy and executes firmware that senses inputs, controls outputs, and manages communications in industrial equipment, consumer products, sensors, and embedded systems. The STM32F413ZHT6 belongs to STMicroelectronics' STM32F4 access-line family and uses the Arm Cortex-M4 RISC architecture.
Principal characteristics include a maximum core frequency of 100 MHz, a 32-bit architecture, up to 1.5 MB of Flash program memory, and 320 KB of SRAM. The 3.3 V operating point shown in distributor product records suits conventional embedded power systems. The LQFP-144 package provides a high pin count for systems requiring extensive peripheral routing while retaining through-hole lead geometry for assembly and inspection.
The Cortex-M4 core uses the Arm Thumb instruction set and includes a single-precision floating-point unit, supporting digital signal processing and control calculations that benefit from hardware floating-point execution. At a maximum frequency of 100 MHz, the family is positioned for responsive control loops, communication gateways, human-interface systems, and connected embedded equipment without requiring a higher-performance application processor.
Typical uses include industrial sensor hubs, building-control terminals, connected actuators, communications equipment, audio interfaces, and compact consumer-control products. Designers select this part when firmware needs more memory and I/O than a small microcontroller but the application can remain within a compact 100 MHz embedded-control architecture.
A successful layout should preserve clean power distribution, provide the decoupling and external-component arrangements specified by the family datasheet, and route sensitive interfaces away from switching nodes. Confirm the complete pin assignments, electrical limits, clock requirements, and unused-pin treatment against the manufacturer datasheet before releasing the PCB.
This page combines manufacturer specifications, package information, drop-in alternatives, comparison parameters, and practical engineering guidance to accelerate component selection and board-design review.
חלופות תחליף ישיר עבור STM32F413ZHT6 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
STM32F413ZHT7
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
STM32F423ZHT6
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
STM32F423ZHT7
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
STM32F413ZHT6 דירוגים מרביים ומאפיינים חשמליים
| Product Type | 32-bit Arm Cortex-M4 microcontroller |
| Maximum Core Frequency | 100 MHz |
| Core Architecture | 32-bit Arm Cortex-M4 RISC |
| Peak Performance | 125 DMIPS |
| Floating-Point Unit | Included single-precision FPU |
| Flash Memory | Up to 1.5 MB |
| SRAM | 320 KB |
| Program Memory Organization | 1.5 Mbyte (1.5M x 8) |
| Nominal Supply Voltage | 3.3 V |
| מארז | 144-pin LQFP, 20 mm x 20 mm |
| סוג הרכבה | Surface-mount LQFP |
מדריך תצורת פינים של STM32F413ZHT6 144-pin lqfp, 20 mm x 20 mm
תצורת פינים עבור STM32F413ZHT6 (מארזת 144-pin lqfp, 20 mm x 20 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור STM32F413ZHT6.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
STM32F413ZHT6 מתאים עבור 6 יישוםs: Industrial Sensor Hub, Building Control Terminal, Connected Communication Gateway, Audio and Control Interface, USB-C Device Controller, Connected Actuator Controller.
Industrial Sensor Hub
The STM32F413ZHT6 fits an industrial sensor hub that must aggregate measurements and manage local communications within a compact embedded controller. Its Cortex-M4 core operates up to 100 MHz and reaches 125 DMIPS, while the hardware floating-point unit accelerates filtering and calibration calculations without relying on a separate processor. Up to 1.5 MB of Flash accommodates drivers, protocol stacks, and application firmware, and 320 KB of SRAM supports acquisition buffers and communication state. The 144-pin LQFP package offers extensive routing options for sensing, serial links, and control signals. Confirm the exact peripheral assignments, industrial temperature grade, and isolation strategy before using the device in safety-critical or high-noise environments.
מומלץ
Building Control Terminal
The STM32F413ZHT6 is appropriate for a building-control terminal that coordinates sensors, relays, communications, and a local user interface. Its 100 MHz Cortex-M4 performance provides ample responsiveness for control logic, debounce handling, communications, and display updates, while 320 KB of SRAM supports protocol buffers and working memory. The 1.5 MB Flash capacity permits integrated networking stacks, configuration storage, and field-upgrade features. Its 3.3 V operating point aligns with many embedded control boards, and the 144-pin LQFP package provides enough pins for multiple serial, timer, and GPIO assignments. Validate the board's environmental requirements and low-power behavior because the exact clock, sleep modes, and peripheral inventory are defined at the family level.
מומלץ
Connected Communication Gateway
The STM32F413ZHT6 can serve as the controller in a compact communications gateway where protocol conversion and local routing must be handled without a high-power application processor. Its 32-bit Cortex-M4 architecture runs up to 100 MHz and provides hardware floating-point support, while up to 1.5 MB of Flash creates room for multiple protocol stacks and security-related code. The 320 KB SRAM capacity supports buffering and simultaneous stateful interfaces. A 144-pin LQFP package makes the controller practical for boards requiring numerous UART, SPI, I2C, timer, and interrupt assignments. Select the final network interface and transceiver based on the exact STM32F413xH peripheral configuration, then confirm electrical levels, isolation, and timing margin for the target industrial network.
מומלץ
Audio and Control Interface
The STM32F413ZHT6 suits an audio or multifunction control interface that combines real-time control, communications, and signal-management firmware. Its Cortex-M4 FPU supports efficient digital filtering and other floating-point tasks at the 100 MHz maximum frequency, while the 125 DMIPS performance rating leaves headroom for graphical control logic and protocol handling. Up to 1.5 MB of Flash can store application code and sound-control tables, and 320 KB of SRAM can accommodate signal buffers. The 144-pin LQFP package provides access to a broad pin count for audio-control signals, displays, and communications. Before schematic capture, verify the exact DAC, ADC, timer, and DMA resources required by the audio path against the manufacturer datasheet.
מומלץ
USB-C Device Controller
The STM32F413ZHT6 is a candidate for a USB device controller in a compact embedded product requiring control firmware, data handling, and multiple peripheral interfaces. Its 32-bit Cortex-M4 core operates up to 100 MHz and includes a hardware FPU, providing sufficient control headroom for protocol processing and application tasks. The 1.5 MB Flash maximum supports a USB stack, device firmware, and configuration data, while 320 KB of SRAM accommodates packet buffers. The 144-pin LQFP package offers a large assignment budget for USB, power control, status indicators, and communications. Confirm the family's USB device capabilities, PHY requirements, clock tolerances, and supply sequencing in the official datasheet before assigning the USB connector and power-management circuitry.
מומלץ
Connected Actuator Controller
The STM32F413ZHT6 fits an actuator controller that interprets sensor inputs, executes control algorithms, and drives outputs across industrial or embedded equipment. Its 100 MHz Cortex-M4 core and 125 DMIPS rating support responsive control tasks, while the single-precision FPU benefits filtering, transforms, and proportional-control calculations. Up to 1.5 MB of Flash accommodates motion-control code and parameter sets, and 320 KB of SRAM provides working memory for real-time loops. The 144-pin LQFP package supplies numerous GPIO, timer, and communications pins for encoders, actuators, and status signals. Review exact timer channels, DMA mappings, pin alternates, and electrical limits in the manufacturer documentation, and size external drivers and protection networks independently of the MCU ratings.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור STM32F413ZHT6 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | STM32F413ZHT7 | STM32F423ZHT6 | STM32F423ZHT7 |
|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 144-pin LQFP (20 mm x 20 mm) | 144-pin LQFP (20 mm x 20 mm) | 144-pin LQFP (20 mm x 20 mm) | 144-pin LQFP (20 mm x 20 mm) |
| Processor Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum Core Frequency | 100 MHz | 100 MHz | 100 MHz | 100 MHz |
| Flash Memory | Up to 1.5 MB | 1.5 MB | 1.5 MB | 1.5 MB |
| SRAM | 320 KB | 320 KB | 320 KB | 320 KB |
| Floating-Point Unit | Included single-precision FPU | Included single-precision FPU | Included single-precision FPU | Included single-precision FPU |
| Peak Performance | 125 DMIPS | 125 DMIPS | 125 DMIPS | 125 DMIPS |
| Nominal Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Primary Engineering Difference | Baseline STM32F413xH temperature-grade ordering code | Different temperature-grade ordering code; core, Flash, and SRAM ratings unchanged | Different peripheral family with core, Flash, and SRAM ratings unchanged | Different peripheral family and temperature-grade ordering code |
מבדילים עיקריים
- Matches the 100 MHz Cortex-M4 performance class (לעומתSTM32F423ZHT6)
- Provides the same 1.5 MB program-memory capacity (לעומתSTM32F413ZHT7)
- Maintains 320 KB of SRAM for real-time working memory (לעומתSTM32F423ZHT7)
- Uses the same 144-pin LQFP land-pattern format (לעומתSTM32F423ZHT6)
הערות תכנון
Start the power design from the 3.3 V operating point, then confirm the exact input-voltage limits and current limits for the STM32F413ZHT6 in the family datasheet. Place the manufacturer-recommended bypass capacitors adjacent to their assigned supply pins and keep the return path short. Estimated: regulator dissipation equals input voltage minus output voltage multiplied by load current; calculate the result at the maximum operating current and ambient temperature before selecting the regulator and copper area.
Use the 144-pin LQFP-144 package diagram as a footprint starting point, but assign every electrical function from the STM32F413xG and STM32F413xH pin-definition table. Route clock lines away from high-current switching nodes, provide a continuous ground reference beneath the device where layout rules permit, and avoid routing high-speed communications directly beneath sensitive analog inputs. Confirm exposed-pad, soldering, and land-pattern details against the manufacturer package drawing.
Do not treat a matching LQFP-144 footprint as proof of drop-in compatibility. Compare alternate-function assignments, power pins, ground pins, clock requirements, boot behavior, and peripheral mapping between the STM32F413ZHT6 and each candidate. The STM32F413ZHT7, STM32F423ZHT6, and STM32F423ZHT7 candidates share the package and core ratings, but production use still requires peripheral-level review, firmware validation, and thermal testing.
Assign external clocks and communication interfaces using the family's documented timing and pin rules. Keep oscillator and clock-trace geometry compact, provide the specified load capacitance, and avoid long unprotected branches. For high-speed serial links, review edge rates, impedance, return paths, and termination against the interface specification. The 100 MHz CPU frequency does not by itself determine the maximum valid interface rate, so use the individual peripheral timing characteristics.
מידע על תאימות
No definitive compliance declarations were identified in the product records. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-mineral status with STMicroelectronics for the exact ordering code before procurement.
