STM32G071C8U6TR - 64MHz Cortex-M0+ MCU | STMicroelectronics
MPN: STM32G071C8U6TR ✓ פעילSTM32G071C8U6TR סקירה
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripheral interfaces, and control logic on one integrated circuit. In the hierarchy of semiconductor devices, the STM32G071C8U6TR is a microcontroller, a general-purpose processor used for embedded control, and an Arm Cortex-M0+ implementation optimized for low-power, real-time applications. It belongs to STMicroelectronics' STM32G0 mainstream microcontroller family.
Key features include a 64 MHz Arm Cortex-M0+ core, 64 KB of Flash for firmware, and 36 KB of SRAM for working memory. The device provides 44 I/Os and a 12-bit analog-to-digital converter. Its UFQFPN package measures 7 x 7 mm, supporting compact PCB designs without using a large leaded package. These characteristics balance processing throughput, memory capacity, analog measurement, and board area for compact control products.
The STM32G071C8U6TR uses an Arm Cortex-M0+ 32-bit RISC architecture and belongs to the STM32G0 class of mainstream devices. Its memory organization includes 64 KB of Flash and 36 KB of SRAM. The 12-bit ADC supports embedded measurement applications, while the 44 available I/Os allow connection of sensors, actuators, communications, and human-interface signals. Exact ADC characteristics, peripheral configurations, clock-tree details, and electrical limits are defined in the manufacturer datasheet.
Typical applications include compact industrial controllers, building automation modules, appliance control boards, sensor nodes, communication equipment, and low-cost consumer products. The 64 MHz processing rate is useful for protocol handling, state-machine control, and real-time peripheral management, while the small 7 x 7 mm footprint supports space-constrained products. Storage of application code in the 64 KB Flash allows firmware, configuration data, and boot logic to be consolidated on the MCU.
When laying out a board, place decoupling capacitors at each supply pin and route sensitive analog inputs away from fast-switching nodes. Confirm the exposed-pad connection and thermal-layout requirements from the package drawing in the manufacturer datasheet. Firmware replacement must also account for boot, option-byte, and debug configuration differences among otherwise closely related STM32G071 order codes.
This page consolidates the manufacturer specifications, package information, engineering application guidance, and same-footprint replacement analysis for the STM32G071C8U6TR. The alternatives and comparison rows distinguish verified drop-in options from changes that require firmware, qualification, or hardware review before use.
חלופות תחליף ישיר עבור STM32G071C8U6TR — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם STM32G071C8U6TR (אותו גורם צורה וטביעת רגל) — שונים ב ADC Resolution, Flash Memory, Mounting Type, Package.
STM32G071C8U7TR
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
STM32G071C8U3TR
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
STM32G071C8T6TR
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←STM32G071CBT6TR
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
STM32G071CBU6TR
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
STM32G071C8U6TR דירוגים מרביים ומאפיינים חשמליים
| Product Type | 32-bit Arm Cortex-M0+ microcontroller |
| Maximum CPU Frequency | 64 MHz |
| Flash Memory | 64 KB (64K x 8) |
| SRAM | 36 KB |
| ADC Resolution | 12 bit |
| Number of I/Os | 44 I/O |
| רוחב אפיק נתונים | 32 bit |
| Core | Arm Cortex-M0+ |
| מארז | 48-UFQFPN, 7 x 7 mm |
| סוג הרכבה | SMD surface mount |
| Minimum Operating Temperature | -40 °C |
| Maximum Operating Temperature | +85 °C |
| Core Instruction Set | Arm Cortex-M0+ 32-bit RISC |
| Program Memory Type | Flash |
| Product Family | STM32G0 mainstream microcontroller family |
| מספר פינים | 48 pins |
מדריך תצורת פינים של STM32G071C8U6TR 48-ufqfpn, 7 x 7 mm
תצורת פינים עבור STM32G071C8U6TR (מארזת 48-ufqfpn, 7 x 7 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור STM32G071C8U6TR.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
STM32G071C8U6TR מתאים עבור 6 יישוםs: Compact Industrial Control Module, Building Automation and HVAC Controller, Smart Sensor Node, Appliance Control Board, Communication Interface Module, LED Driver and Lighting Controller.
Compact Industrial Control Module
The STM32G071C8U6TR fits compact control modules that need deterministic embedded processing without a high-power application processor. Its 64 MHz Arm Cortex-M0+ core can execute control loops and communication tasks, while 36 KB of SRAM provides working memory for state machines and I/O buffering. The 48-pin UFQFPN 7 x 7 mm package preserves board area for relays, sensor interfaces, and power conversion stages. The -40 °C to +85 °C range suits equipment deployed across ordinary industrial environments, provided the complete operating voltage, pin multiplexing, and peripheral configuration are checked against the manufacturer datasheet.
מומלץ
Building Automation and HVAC Controller
The STM32G071C8U6TR is appropriate for building-automation nodes that coordinate sensors, relays, and serial interfaces. Its 44 I/Os provide connections for digital inputs, outputs, and status indicators, while the 12-bit ADC supports monitoring of conditioned analog sensor signals. At 64 MHz, the Cortex-M0+ core can service communication protocols and control logic concurrently. The 7 x 7 mm UFQFPN footprint helps produce compact room controllers, but exposed-pad layout and thermal performance should be reviewed before enclosing the board in a thermally insulated housing.
מומלץ
Smart Sensor Node
The STM32G071C8U6TR can serve as the processing center of a compact sensor node that samples analog inputs, evaluates thresholds, and transmits measurements. Its 12-bit ADC supports general-purpose sensing, while 64 KB of Flash accommodates application firmware and configuration. The 36 KB SRAM can hold sample buffers and communication state without requiring an external memory device. This makes the MCU suitable for industrial sensor hubs, environmental monitors, and compact condition-monitoring modules. Low-power behavior and the exact peripheral clock configuration should be reviewed from the datasheet when battery operation or duty-cycled sampling is required.
מומלץ
Appliance Control Board
A washing machine, kitchen appliance, or small motor-driven product can use the STM32G071C8U6TR to coordinate user inputs, sensors, and actuators. Its 44 I/Os reduce the need for external I/O expanders, and the 64 MHz processing rate supports responsive state-machine control. The 48-pin 7 x 7 mm package is useful for space-constrained control boards, while the 12-bit ADC supports analog measurement. For motor, heater, or mains-connected equipment, maintain appropriate isolation, surge protection, grounding, and thermal separation on the PCB; those safety functions are not provided by the MCU package itself.
מומלץ
Communication Interface Module
The STM32G071C8U6TR is suitable for protocol-conversion and interface modules requiring a fast general-purpose core and moderate memory. Its 64 KB Flash can hold protocol stacks and configuration, while 36 KB of SRAM supports framing buffers and state management. The 44 I/Os permit simultaneous serial, diagnostic, and control signals. It can complement a dedicated Ethernet interface device when a protocol bridge, configuration engine, or supervisory controller is also required. Before layout, verify UART, SPI, I2C, USB, and timer availability for the exact package, including whether a VREF+ pin is present.
מומלץ
LED Driver and Lighting Controller
The STM32G071C8U6TR can coordinate LED drivers in decorative lighting, signage, or compact fixtures where timing and dimming control are needed. Its 64 MHz core supports PWM generation, fault-state handling, and communication updates, while the 12-bit ADC can monitor a conditioned feedback voltage. The 48-pin package provides enough I/O for switch inputs, fault signals, and serial configuration. A linear or switching LED driver remains a separate power-conversion stage; size its inductor, switching devices, capacitors, and thermal path independently while following the manufacturer reference design for the selected topology.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור STM32G071C8U6TR — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | STM32G071C8U7TR | STM32G071C8U3TR | STM32G071C8T6TR | STM32G071CBT6TR | STM32G071CBU6TR |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 48-UFQFPN, 7 x 7 mm | 48-UFQFPN, 7 x 7 mm | 48-UFQFPN, 7 x 7 mm | 48-UFQFPN, 7 x 7 mm | 48-UFQFPN, 7 x 7 mm | 48-UFQFPN, 7 x 7 mm |
| CPU Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 64 MHz | 64 MHz | 64 MHz | 64 MHz | 64 MHz | 64 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB | 128 KB | 128 KB |
| SRAM | 36 KB | 36 KB | 36 KB | 36 KB | 36 KB | 36 KB |
| ADC Resolution | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit |
| Special Ordering Feature | U6 temperature and order code | U7 temperature and order code | U3 temperature and order code | T6 order code | 128 KB Flash configuration | 128 KB Flash configuration |
מבדילים עיקריים
- Matches the same STM32G071C8 memory and processing configuration (לעומתSTM32G071C8U7TR)
- Retains the standard U6 order configuration while offering a higher-memory same-family option (לעומתSTM32G071CBU6TR)
- Provides a documented 64 KB Flash configuration for firmware-constrained designs (לעומתSTM32G031C8U6TR)
הערות תכנון
Assign every power, ground, debug, reset, analog, and GPIO connection from the 48-pin STM32G071C8 package drawing before releasing the PCB. Place the required supply-decoupling capacitors close to their corresponding VDD and VSS pins, keep the exposed-pad connection consistent with the datasheet land pattern, and route analog inputs away from switching nodes. Because this exact UFQFPN 48-pin drawing is not represented by the selected package-diagram library entry, the complete pin table must be used directly during layout review.
Validate the complete supply-voltage range, regulator tolerance, startup behavior, and current budget against the manufacturer datasheet before selecting passive components. The MCU requires a clean local supply, but the IC does not generate or regulate its own input voltage. Account for analog-reference noise, VDD current, and any conversion or communication activity when sizing upstream regulators. If the C8 package has no dedicated VREF+ pin, VREF+ is internally connected to VDD and the internal voltage-reference buffer must remain disabled.
Do not treat a related order code as interchangeable solely because it uses the same family and footprint. Confirm the exact temperature suffix, Flash size, SRAM size, exposed-pad connection, pin multiplexing, boot configuration, marking, qualification status, and ordering information in the manufacturer datasheet. In particular, verify that firmware addresses remain within the selected part's memory and that any changed peripheral configuration does not alter a production PCB's behavior.
Separate sensitive analog inputs, reference connections, and low-level sensor traces from digital clocks and high-current switching paths. Use a continuous ground reference where the package design permits, minimize loop area around decoupling components, and test points should not interrupt high-speed return paths. For designs using the 12-bit ADC, the achievable measurement accuracy depends on the analog source impedance, reference stability, sampling time, and PCB noise rather than nominal ADC resolution alone.
מידע על תאימות
The manufacturer product page and datasheet identify the STM32G071C8 family, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations are stated in the product records reviewed. Obtain the current manufacturer material-declaration or compliance documents before making a compliance claim.