STM32G071CBU7TR - 64MHz Cortex-M0+ | STMicroelectronics
MPN: STM32G071CBU7TR ✓ פעילSTM32G071CBU7TR סקירה
A microcontroller is an integrated circuit that executes embedded software, reads sensor inputs, controls digital and analog peripherals, and coordinates communication between a product’s main processor and external circuitry. The STM32G0 family belongs to the hierarchy of microcontroller, embedded processor, semiconductor, and programmable control-device categories. Its Arm Cortex-M0+ core combines efficient 32-bit instruction execution with a compact peripheral set suited to cost-sensitive industrial, consumer, and equipment-control products.
The STM32G071CBU7TR provides 128 KB of Flash for program storage and 36 KB of SRAM for working memory and data handling. Four USARTs support serial links to sensors, human-interface modules, converters, and service equipment. Integrated ADC and DAC resources reduce external component count when analog measurements or controlled analog outputs are required, while timers support timing, input capture, output compare, and motor-control-oriented functions.
The 64 MHz operating limit gives designers additional performance headroom for protocol processing, control-loop execution, and multitasking embedded workloads. A 1.7 V to 3.6 V operating-voltage range supports low-voltage system architectures, while the 48-pin UFQFPN package provides a compact surface-mount option for space-constrained boards. Its UFQFPN construction also requires careful PCB land-pattern and thermal-layout execution because exposed-area soldering and assembly process controls affect contact reliability.
Typical applications include compact sensor nodes, industrial monitoring equipment, appliance controllers, building-automation endpoints, low-cost serial gateways, motor or valve control modules, and small access-control panels. The combination of 128 KB Flash, 36 KB RAM, four USARTs, ADC, DAC, and timers allows a single MCU to handle several peripheral functions without requiring a larger package or separate analog controller.
When designing the PCB, follow the manufacturer package drawing for the UFQFPN land pattern, exposed pad, solder-mask clearance, and paste stencil. Place decoupling capacitors close to the appropriate supply pins, route sensitive analog signals away from fast-switching nodes, and confirm programming, debug, clock, and reset connections against the manufacturer pin description before fabrication.
This page organizes the key technical characteristics, sourcing information, verified same-brand replacement options, and practical implementation guidance for engineers evaluating the STM32G071CBU7TR in a new embedded design.
חלופות תחליף ישיר עבור STM32G071CBU7TR — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
STM32G071CBU3TR
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
STM32G071CBU6TR
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
STM32G071CBU7TR דירוגים מרביים ומאפיינים חשמליים
| Product Type | 32-bit microcontroller |
| Processor Core | Arm Cortex-M0+ |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 64 MHz |
| Flash Memory | 128 KB |
| Flash Organization | 128K x 8 bits |
| RAM | 36 KB |
| Operating Voltage Range | 1.7 V to 3.6 V |
| USART Count | 4 |
| ADC | Integrated |
| DAC | Integrated |
| Timers | Integrated |
| Communication Interfaces | Integrated communication interfaces |
| מארז | 48-pin UFQFPN |
| Package Dimensions | 7 x 7 mm |
| סוג הרכבה | Surface mount |
מדריך תצורת פינים של STM32G071CBU7TR 7 x 7 mm
תצורת פינים עבור STM32G071CBU7TR (מארזת 7 x 7 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור STM32G071CBU7TR.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
STM32G071CBU7TR מתאים עבור 6 יישוםs: Compact Industrial Sensor Nodes, Home and Building Automation Endpoints, Serial Gateway and Data Concentrator, Appliance and Equipment Controllers, Motor, Valve, and Actuator Control, Battery-Powered Portable Controller.
Compact Industrial Sensor Nodes
The STM32G071CBU7TR fits compact industrial sensor nodes that combine local measurement, serial reporting, and limited local processing. Its 64 MHz Arm Cortex-M0+ core provides performance margin for sampling schedules, filtering, status logic, and communication tasks, while 36 KB of RAM supports buffers and protocol state. The integrated ADC can accept analog sensor signals without a separate converter IC, and four USARTs can connect sensors, local displays, service ports, or upstream controllers. Operated from 1.7 V to 3.6 V, the MCU supports compact low-voltage sensor assemblies. The 48-pin UFQFPN package also reduces board area, although designers should preserve the manufacturer’s exposed-pad soldering and decoupling recommendations.
מומלץ
Home and Building Automation Endpoints
The STM32G071CBU7TR is suitable for building-automation endpoints that supervise sensors, switches, lighting interfaces, or motorized valves. Its four USARTs provide multiple serial paths for local modules and service equipment, while the ADC and DAC support analog sensing and controlled outputs. The 128 KB Flash capacity accommodates networking stacks, application logic, configuration data, and update-related code, while the 64 MHz core supports responsive event handling. A 1.7 V to 3.6 V operating range permits integration with low-voltage power trees and energy-conscious peripherals. Its 48-pin UFQFPN format is useful in wall controllers and compact room modules, where PCB space is constrained and reliable high-density assembly requires a correctly designed land pattern.
מומלץ
Serial Gateway and Data Concentrator
The STM32G071CBU7TR works well in a small serial gateway that aggregates multiple low-speed device connections. Four USARTs can manage separate sensor or controller links, while the 64 MHz Cortex-M0+ processor handles framing, filtering, timeout management, and data forwarding. Its 128 KB Flash and 36 KB RAM provide a practical balance for gateway firmware and transmit/receive buffers. The integrated ADC and DAC broaden the gateway’s usefulness for analog I/O, diagnostics, or local control without requiring separate converters. The 1.7 V to 3.6 V supply range supports integration into compact controller boards, and the 48-pin UFQFPN package limits footprint growth. Firmware and PCB sign-off should include timing margins, UART load calculations, and proper exposed-pad assembly.
מומלץ
Appliance and Equipment Controllers
The STM32G071CBU7TR can serve as the primary controller in appliance, laboratory-equipment, or service-device platforms. Its 64 MHz Cortex-M0+ core supports responsive user-interface handling, sensor fusion, motor timing, and supervisory logic, while 128 KB Flash and 36 KB RAM provide room for application code and working memory. Four USARTs allow connection to displays, sensors, programmers, or external modules, and the ADC and DAC enable local analog measurement and output functions. The 1.7 V to 3.6 V operating range allows deployment across low-voltage internal rails. The 48-pin UFQFPN package helps reduce controller-board size, but thermal and assembly reliability still depend on following the manufacturer’s land pattern, paste, and reflow guidance.
מומלץ
Motor, Valve, and Actuator Control
The STM32G071CBU7TR is appropriate for compact motor, valve, and actuator modules where precise timing and local sensing are needed. Integrated timers can implement input capture, output compare, and periodic control functions, while the 64 MHz core executes motion or positioning logic and safety monitoring. The ADC can sample position, current, or condition signals, while the DAC can support biasing or test functions. Its 128 KB Flash is useful for parameterized control code and calibration tables, and four USARTs permit configuration and diagnostic channels. The 1.7 V to 3.6 V range integrates well with compact actuator electronics. Designers should size external drive and protection components separately and verify timing behavior with the complete power stage.
מומלץ
Battery-Powered Portable Controller
The STM32G071CBU7TR can support portable and battery-powered controllers where low supply voltage, mixed serial connectivity, and compact packaging are priorities. Its 1.7 V to 3.6 V operating range allows use with low-voltage energy-storage systems, while integrated ADC and DAC can reduce the component count of portable analog-control products. The Cortex-M0+ core executes up to 64 MHz for responsive control tasks, while 128 KB Flash and 36 KB RAM accommodate application code and data buffers. Four USARTs can serve configuration, logging, and accessory connections. Although sleep-mode current and wakeup behavior must be evaluated for the final product, the MCU offers a useful combination of memory, peripherals, and package density for compact handheld equipment and portable instrumentation.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור STM32G071CBU7TR — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | STM32G071CBU3TR | STM32G071CBU6TR |
|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 48-pin UFQFPN (7 x 7 mm) | 48-pin UFQFPN (7 x 7 mm) | 48-pin UFQFPN (7 x 7 mm) |
| Processor Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 64 MHz | 64 MHz | 64 MHz |
| Flash Memory | 128 KB | 128 KB | 128 KB |
| RAM | 36 KB | 36 KB | 36 KB |
| Operating Voltage Range | 1.7 V to 3.6 V | 1.7 V to 3.6 V | 1.7 V to 3.6 V |
| USART Count | 4 | 4 | 4 |
| ADC and DAC | Integrated ADC and DAC | Integrated ADC and DAC | Integrated ADC and DAC |
| Temperature-Grade Suffix | U7 | U3; upper rating +40 °C relative to U7 | U6; upper rating matches U7 |
מבדילים עיקריים
- Broad serial connectivity in a compact package (לעומתSTM32G071CBU3TR)
- Useful integration of mixed analog and digital peripherals (לעומתSTM32G071CBU6TR)
- Memory capacity suited to connected embedded control (לעומתSTM32G071CBU3TR)
הערות תכנון
Implement the 48-pin UFQFPN footprint directly from the manufacturer package drawing, including the exposed pad, mask expansion, and recommended paste area. The 7 x 7 mm package leaves little room for routing corrections after fabrication, so verify pad dimensions and courtyard against the current package drawing before releasing Gerber files. Follow the manufacturer’s reflow profile and exposed-pad inspection requirements; an electrically correct schematic cannot compensate for poor solderability or insufficient void control.
Place the required decoupling capacitors immediately beside their associated supply and ground pins, with short and low-inductance return paths. Keep sensitive analog inputs and ADC or DAC connections away from switching nodes and high-current return paths. The MCU operates from 1.7 V to 3.6 V, so verify that every rail remains inside that range during startup, reset, sleep transitions, and peripheral activity. Use the manufacturer’s pin-description table to identify every supply connection rather than relying only on package-level power labels.
Plan clock, debug, programming, and serial-debug connections before final placement. Preserve short paths for high-speed clock signals, maintain continuous ground reference beneath the device, and isolate analog traces from digital switching activity. Although the 48-pin package provides several USART, ADC, DAC, timer, and control functions, assign every pin from the manufacturer pin table and leave no unconnected input without an intentional pull or termination. This prevents accidental floating inputs and simplifies production rework.
Do not treat the STM32G071CBU3TR or STM32G071CBU6TR suffix change as a transparent production substitution without a qualification review. Confirm the temperature grade, marking scheme, exposed-pad requirements, lifecycle status, and firmware configuration for the replacement. Also verify that the intended operating environment remains within the selected part’s rating. When changing package or ordering code, repeat board-level decoupling, assembly, and functional validation rather than relying only on the shared 48-pin UFQFPN outline.
מידע על תאימות
The manufacturer product page and distributor descriptions do not explicitly state the requested environmental or material-compliance statuses for this ordering code. Confirm declarations for the exact packaged part with the manufacturer.