STM32G071GBU3 - 64MHz Cortex-M0+ MCU | STMicroelectronics
MPN: STM32G071GBU3 ✓ פעילSTM32G071GBU3 סקירה
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface logic on one package. The STM32G0 series is positioned within the broader hierarchy of Arm Cortex-M embedded processors, microcontrollers, and semiconductor devices. Its Cortex-M0+ core uses a 32-bit RISC architecture and is designed for compact control systems that require efficient real-time execution without the complexity of a higher-performance Cortex-M core.
The STM32G071GBU3 provides up to 128 KB of Flash for program storage and 36 KB of SRAM for working data. Its maximum operating frequency is 64 MHz. These three resources—128 KB of Flash, 36 KB of RAM, and 64 MHz processing speed—allow embedded firmware to combine control logic, communication routines, state management, and peripheral handling in a single device. The 28-pin UFQFPN package also supports compact PCB layouts where component area is important.
The STM32G071x8 and STM32G071xB devices are based on the Arm Cortex-M0+ core and are identified by STMicroelectronics as mainstream microcontrollers. This positioning makes the STM32G071GBU3 suitable for products that need modern embedded performance and compact integration without moving to a larger package or a more complex processor architecture. The exact peripheral mix, clock configuration, and electrical limits should be confirmed against the package-specific pinout and operating conditions in the manufacturer datasheet.
Typical uses include compact industrial controllers, low-cost sensor-hub electronics, building and access-control modules, appliance interfaces, and general-purpose embedded control boards. The 4 x 4 mm package can simplify board miniaturization, but its fine-pitch construction requires careful PCB layout and assembly. Firmware development can use the STM32G0 device family's Cortex-M software ecosystem, subject to the memory map and peripheral configuration required by the selected part.
A primary design consideration is that the U3 ordering code denotes a specific device grade and package configuration. Before replacing the MCU, compare the complete ordering information, temperature range, pin availability, clock limits, and exposed-pad requirements. Decoupling, programming access, boot configuration, and analog or communication functions must also be checked against the package pinout rather than inferred only from the family name.
This product page combines manufacturer specifications, package details, commercial sourcing guidance, practical application guidance, and a comparison with the closely related STM32G071GBU6. The accompanying engineering notes focus on PCB density, power integrity, firmware validation, and the checks that matter when deciding whether an MCU can be substituted without redesigning the board.
חלופות תחליף ישיר עבור STM32G071GBU3 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם STM32G071GBU3 (אותו גורם צורה וטביעת רגל) — שונים ב Package.
STM32G071GBU6
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←STM32G071GBU3 דירוגים מרביים ומאפיינים חשמליים
| Product Type | 32-bit Arm Cortex-M0+ microcontroller |
| Series | STM32G0 |
| Maximum CPU Frequency | 64 MHz |
| Flash Memory | 128 KB |
| Program Memory Organization | 128K x 8 bits |
| RAM | 36 KB |
| Processor Core | Arm Cortex-M0+ |
| Instruction Set | 32-bit RISC |
| מארז | 28-pin UFQFPN |
| Package Dimensions | 4 x 4 mm |
| סוג הרכבה | Surface mount |
| Product Positioning | Mainstream microcontroller |
מדריך תצורת פינים של STM32G071GBU3 4 x 4 mm
תצורת פינים עבור STM32G071GBU3 (מארזת 4 x 4 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור STM32G071GBU3.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
STM32G071GBU3 מתאים עבור 6 יישוםs: Compact Industrial Sensor Controller, Building and Access-Control Module, Smart Appliance Control Board, Battery-Powered IoT Sensor Hub, LED Lighting Controller, Compact Data Acquisition Module.
Compact Industrial Sensor Controller
The STM32G071GBU3 fits compact sensor controllers that must acquire, filter, and interpret local measurements without relying on a higher-performance processor. Its Arm Cortex-M0+ core operates at up to 64 MHz, providing enough instruction throughput for sampling loops, filtering, state-machine control, and communication handling. With 128 KB of Flash and 36 KB of RAM, firmware can retain calibration tables, working buffers, and communication routines in one device. The 28-pin UFQFPN occupies only a 4 x 4 mm area, helping reduce board size, although power routing, decoupling, and fine-pitch assembly must be designed carefully.
מומלץ
Building and Access-Control Module
The STM32G071GBU3 is appropriate for access-control readers, lock controllers, and building interface modules where event handling and peripheral coordination must remain deterministic. Its 64 MHz Cortex-M0+ core can manage keypad scanning, sensor inputs, actuator commands, status indication, and a local communications protocol. The 128 KB Flash capacity supports protocol and application code, while 36 KB of RAM accommodates message buffers and short-term state. Its compact 28-pin UFQFPN package helps fit the controller inside a constrained enclosure, but exposed-pad connection and startup behavior must follow the package documentation.
מומלץ
Smart Appliance Control Board
The STM32G071GBU3 supports smart-appliance control boards that combine user inputs, motor or relay sequencing, temperature monitoring, and status communication. The 64 MHz Cortex-M0+ processor provides efficient real-time execution for control tables and debounce logic, and 36 KB of RAM allows temporary storage for display or communication data. Its 128 KB Flash capacity is suitable for moderate application firmware while preserving room for future features. The 4 x 4 mm UFQFPN package reduces routing space, making careful decoupling, thermal-pad construction, and assembly-process planning especially important.
מומלץ
Battery-Powered IoT Sensor Hub
The STM32G071GBU3 can serve as the local control MCU in a battery-powered IoT sensor hub that aggregates readings from several low-speed sensors. Its Cortex-M0+ architecture supports event-driven firmware, timing, data packing, and intermittent communications without the memory overhead of a more complex application processor. The 128 KB Flash and 36 KB RAM configuration provides room for protocol stacks and local buffering, while the compact package assists board miniaturization. Low-power behavior and wake sources must be configured from the manufacturer documentation, and every external sensor interface should be checked against the package pin map.
מומלץ
LED Lighting Controller
The STM32G071GBU3 is well suited to compact LED-lighting controllers where multiple channels, button handling, fault detection, and communication must coexist on a small board. Its 64 MHz Cortex-M0+ core can execute timing sequences and control algorithms, while 128 KB of Flash stores lighting tables and firmware and 36 KB of RAM supports transient display or configuration data. The 28-pin UFQFPN helps minimize the controller footprint. Designers should verify the exact available I/O, timer outputs, and analog functions in the package-specific pinout and use the manufacturer timing limits when driving external LED drivers.
מומלץ
Compact Data Acquisition Module
The STM32G071GBU3 is suitable for a compact data-acquisition module that gathers sensor data, performs basic scaling, and forwards results over a serial interface. The 128 KB Flash capacity can hold acquisition firmware and configuration tables, while 36 KB of RAM supports sample buffers and protocol processing. The 64 MHz Cortex-M0+ core provides deterministic control for timing-sensitive sampling and digital filtering. The small 4 x 4 mm package simplifies integration into instrument enclosures, but analog routing, reference requirements, grounding, and the available ADC resources must be verified in the manufacturer datasheet.
מומלץ
נתוני עזר הנדסיים עבור STM32G071GBU3 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | STM32G071GBU6 |
|---|---|---|
| Package | 28-pin UFQFPN (4 x 4 mm) | 28-pin UFQFPN (4 x 4 mm) |
| Brand | STMicroelectronics | STMicroelectronics |
| Processor Core | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 64 MHz | 64 MHz |
| Flash Memory | 128 KB | 128 KB |
| RAM | 36 KB | 36 KB |
| Ordering Grade | U3 | U6 |
מבדילים עיקריים
- Direct same-family package match (לעומתSTM32G071GBU6)
- Identical processor-frequency class (לעומתSTM32G071GBU6)
- Identical Flash-capacity class (לעומתSTM32G071GBU6)
- Mainstream STM32G0 positioning (לעומתSTM32G071GBU6)
הערות תכנון
Treat the 28-pin UFQFPN as a fine-pitch, high-density footprint. Route power and ground connections directly to the package using short planes or pours, place decoupling capacitors close to the relevant supply pins, and connect the exposed pad according to the package land pattern and thermal requirements. Confirm pad dimensions, solder-mask definition, and paste pattern against the current STMicroelectronics package drawing rather than scaling a generic 4 x 4 mm footprint.
Do not assume that two STM32G071GB suffix variants are interchangeable solely because their package names and headline specifications match. Compare the suffix-specific temperature range, qualification status, supply limits, and ordering information in the manufacturer datasheet. After a substitution, rebuild the firmware, verify clock startup and watchdog behavior, exercise every used peripheral, and test the assembled board across its intended voltage and environmental conditions.
Assign pins from the STM32G071GB package-specific diagram rather than from a larger STM32G0 variant. Check boot, debug, programming, reset, supply, ground, and exposed-pad requirements before schematic capture. For mixed-signal designs, segregate analog and digital return paths, keep switching-node copper away from sensitive inputs, and confirm whether VREF+ is externally presented for this package before enabling the internal reference buffer.
Estimate junction temperature from actual switching loss, ambient conditions, board copper, and the package thermal model rather than relying on package size alone. The 4 x 4 mm UFQFPN has limited exposed area, so continuous high-frequency operation or sustained peripheral load can make board thermal performance important. Use thermal vias and copper spreading where the land pattern permits, and measure temperature on representative hardware instead of assuming the PCB is an ideal heat sink.
מידע על תאימות
The manufacturer product page and datasheet should be used to confirm environmental, material, and qualification statements for the exact ordering code.