STM32L151VCH6 - 32MHz Cortex-M3 256KB MCU | STMicroelectronics
MPN: STM32L151VCH6 ✓ פעילSTM32L151VCH6 סקירה
An ultra-low-power microcontroller is a semiconductor that balances processing capability with minimized energy use during active, sleep, and low-power operating modes. The STM32L1 family belongs to the broader hierarchy of 32-bit microcontrollers, embedded processors, and semiconductor devices. This combination makes it suitable for battery-operated equipment that must perform control, data acquisition, communications, and user-interface functions without relying on numerous external components.
The STM32L151VCH6 reaches 32 MHz while retaining 256 KB of programmable Flash and 32 KB of SRAM. Its integrated USB interface supports connected designs, while the LCD controller can reduce the component count in meter, panel, and portable-instrument applications. Three integrated operational amplifiers can support analog conditioning without requiring separate amplifier packages. The ADC and DAC further consolidate mixed-signal functions around one microcontroller.
Its 100-UFBGA package provides 100 electrical connections for the large set of GPIO and peripheral functions. The compact 7 x 7 mm outline saves board area compared with leaded packages, but it requires careful PCB layout, fine-pitch assembly, and inspection. Because the device combines several analog peripherals with an Arm Cortex-M3 core, firmware configuration and analog reference design become important parts of a successful implementation.
Typical uses include low-energy sensor nodes, USB-connected data loggers, compact industrial controllers, battery-powered medical instruments, LCD-equipped user interfaces, and general-purpose embedded control boards. The integrated LCD interface is especially useful where a compact display replaces multiple discrete display-driver components, while USB can simplify configuration, data transfer, and firmware update workflows.
Design with the supply, decoupling, clock, and analog sections from the manufacturer datasheet. Pay particular attention to BGA pad layout, exposed or routed supply pins, USB impedance-controlled routing, and startup behavior. Confirm the exact temperature range, analog accuracy, and power characteristics required by the application before production release.
This page consolidates the manufacturer overview, distributor observations, package information, replacement considerations, and application guidance for engineers evaluating the STM32L151VCH6. It also distinguishes confirmed characteristics from parameters that require confirmation in the complete device documentation.
חלופות תחליף ישיר עבור STM32L151VCH6 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם STM32L151VCH6 (אותו גורם צורה וטביעת רגל) — שונים ב Flash Memory, Product Type.
STM32L152VCH6
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←STM32L162VCH6
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
STM32L151VCH8
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
STM32L151VCH6 דירוגים מרביים ומאפיינים חשמליים
| Product Type | 32-bit ultra-low-power microcontroller |
| CPU Core | Arm Cortex-M3 |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 256 KB |
| Flash Organization | 256K x 8 bits |
| SRAM | 32 KB |
| EEPROM | 8 KB |
| USB Interface | 1 USB interface |
| LCD Controller | 1 integrated LCD controller |
| ADC | 1 integrated analog-to-digital converter |
| DAC | 1 integrated digital-to-analog converter |
| Operational Amplifiers | 3 integrated operational amplifiers |
| מארז | 100-UFBGA (7 x 7 mm) |
| מספר פינים | 100 pins |
| סוג הרכבה | Surface mount |
מדריך תצורת פינים של STM32L151VCH6 100-ufbga (7 x 7 mm)
תצורת פינים עבור STM32L151VCH6 (מארזת 100-ufbga (7 x 7 mm)). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור STM32L151VCH6.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
STM32L151VCH6 מתאים עבור 6 יישוםs: Battery-Powered Sensor Nodes, USB-Connected Data Loggers, LCD-Equipped Measurement Instruments, Industrial Control and Automation, Portable Medical and Health Devices, Compact General-Purpose Embedded Control.
Battery-Powered Sensor Nodes
The STM32L151VCH6 fits compact, battery-operated sensor nodes because it combines a 32 MHz Arm Cortex-M3 processor with an ADC, 8 KB of EEPROM, and 32 KB of SRAM in one 7 x 7 mm 100-UFBGA package. The microcontroller can acquire sensor signals, apply local filtering, and retain configuration or logged data without requiring separate analog or memory packages. Its low-power MCU architecture is suitable for systems that spend much of their time in sleep and wake to measure, transmit, or update local information. For battery-life estimation, use the active and sleep current figures, wake-up time, and regulator efficiency from the manufacturer documentation.
מומלץ
USB-Connected Data Loggers
The STM32L151VCH6 is appropriate for a USB-connected data logger because it provides a 32 MHz Cortex-M3 core, 256 KB of Flash, 32 KB of SRAM, 8 KB of EEPROM, and an integrated USB interface. Firmware can maintain local control logic, sample an external sensor through the ADC, and transfer records through USB without a separate interface controller. The 100-UFBGA package reduces board area, although USB routing and BGA assembly require disciplined layout and process control. USB bus protection, decoupling, and enumeration timing should be designed from the complete manufacturer application information.
מומלץ
LCD-Equipped Measurement Instruments
The STM32L151VCH6 suits compact measurement instruments that need both a local display and analog measurement functions. Its LCD controller can drive the user interface, while the ADC, DAC, and three operational amplifiers support signal acquisition, conditioning, reference generation, and test excitation. With 256 KB of Flash and 32 KB of SRAM, the device can combine the display application, calibration logic, and communications in one controller. The small 100-UFBGA outline helps reduce instrument size, but the layout must preserve analog performance and provide adequate copper and decoupling around power and signal pins.
מומלץ
Industrial Control and Automation
The STM32L151VCH6 can serve as the control core in compact industrial automation modules where a 32 MHz processor, 256 KB of Flash, and integrated analog peripherals provide useful capability without a large external component count. It is suited to monitoring inputs through the ADC, driving outputs through the DAC, and coordinating communications through USB. Its ultra-low-power MCU classification also benefits systems with intermittent duty cycles. Industrial qualification, extended-temperature operation, transient protection, isolation, and EMC requirements must be evaluated independently because the production grade and environmental limits determine suitability for the final installation.
מומלץ
Portable Medical and Health Devices
The STM32L151VCH6 can support portable medical or health-device functions that combine sensor measurement, local processing, and a compact display. Its 32 MHz Cortex-M3 core handles control software, the ADC supports analog inputs, the DAC supports controlled analog output, and the three integrated amplifiers can assist with front-end conditioning. The 256 KB Flash and 32 KB SRAM are suitable for embedded firmware and working data, while the 100-UFBGA package limits board size. Medical use requires separate evaluation of electrical safety, regulatory, reliability, and environmental requirements; component integration alone does not establish medical-device compliance.
מומלץ
Compact General-Purpose Embedded Control
The STM32L151VCH6 is well matched to compact embedded controllers that need a capable core and several analog functions on a small PCB. Its 32 MHz Arm Cortex-M3 architecture supports responsive control loops, and the 256 KB of Flash provides room for application firmware, communication stacks, and configuration logic. Integrated USB, LCD control, ADC, DAC, and amplifiers can simplify a platform intended for configurable instruments, prototypes, or compact automation modules. Designers should reserve expansion signals for debugging, programming, communications, and future options while following the manufacturer BGA layout and decoupling recommendations.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור STM32L151VCH6 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | STM32L152VCH6 | STM32L162VCH6 | STM32L151VCH8 |
|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 100-UFBGA (7x7) | 100-UFBGA (7x7) | 100-UFBGA (7x7) | 100-UFBGA (7x7) |
| CPU Core | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 256 KB | 256 KB | 256 KB | 512 KB |
| USB Capability | USB interface | USB interface | USB interface; role differences require verification | USB interface |
מבדילים עיקריים
- Broader integrated analog functionality (לעומתSTM32L152VCH6)
- Higher Flash capacity in the closest STM32L151 package variant (לעומתSTM32L151VCH6)
- USB and LCD integration reduces discrete interface overhead (לעומתSTM32L162VCH6)
הערות תכנון
Use the STM32L151VC manufacturer land pattern and pin table for the 100-UFBGA layout. Route supply and ground connections according to the recommended decoupling arrangement, keep analog and digital return paths controlled, and preserve access for X-ray or cross-section inspection. The 7 x 7 mm package has fine-pitch balls, so assembly capability, solder-paste release, and pad-to-mask design rules must be confirmed with the selected manufacturing process.
Treat USB, clock, and analog sections as separate high-priority layout areas. USB traces should use a continuous reference plane with controlled geometry, oscillator routing should minimize capacitive loading and interference, and ADC, DAC, and operational-amplifier connections should use quiet grounding. Place decoupling capacitors close to the relevant supply balls according to the manufacturer recommendations to limit impedance and transient coupling.
Do not treat STM32L151VCH6 and STM32L151VCH6TR as identical ordering references. The latter is a distinct distributor MPN associated with tape-and-reel ordering, while the target is the specified 100-UFBGA device. Before substitution, also compare every exposed-ball assignment, USB role, peripheral availability, boot configuration, and firmware-supported device identifier rather than relying on the family name alone.
Base low-power design decisions on the manufacturer operating-mode currents and wake-up timing. Battery-operated systems should account for the active-processing interval, analog-conversion time, USB activity, sleep current, and startup surge. The integrated analog peripherals can influence the power budget, so measure the complete operating profile across the intended voltage and temperature range instead of estimating from the 32 MHz clock rate.
מידע על תאימות
The STM32L151VC manufacturer product page and distributor records do not provide explicit compliance declarations in their visible product text. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status from the manufacturer declaration for the exact ordering option.