STM8L151K3U3 - 16MHz 8KB Ultra-Low-Power MCU | STMicroelectronics
MPN: STM8L151K3U3 ✓ פעילSTM8L151K3U3 סקירה
A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals into one compact device. The STM8L belongs to the STM8L EnergyLite family, a low-power branch of STM8 microcontrollers used for embedded control, sensing, communications, and battery-powered products. Its role within an embedded system is to execute application firmware, acquire sensor data, control outputs, and coordinate low-energy operating modes.
The STM8L151K3U3 provides 41 I/O ports and an 8 KB Flash program memory within its 32-pin package. Its enhanced STM8 core reaches 16 MIPS at 16 MHz, supporting responsive control tasks while the EnergyLite architecture emphasizes low-power operation. The 1.8 V to 3.6 V operating range accommodates 1.8 V and 3.3 V systems, while the UFQFPN-32 package supports compact surface-mount PCB layouts.
The STM8L151x2 and STM8L151x3 devices target low-density designs where memory economy and low power are more important than a large general-purpose peripheral set. The STM8L151K3U3 is the UFQFPN-32 ordering configuration with 8 KB Flash. Firmware should be selected around the STM8L low-power operating model, and unused pins should be handled according to the manufacturer pin-description and connection guidance.
Typical applications include low-power sensor nodes, compact industrial controls, building and access equipment, battery-operated instruments, connected sensing devices, and portable products. Its 41 I/O ports are useful for digital monitoring and control, while the 8-bit architecture and 16 MHz clock are appropriate for embedded tasks that do not require a high-performance 32-bit processor.
A key design consideration is the exposed-pad thermal and electrical connection in the UFQFPN package. The exposed pad should be connected according to the manufacturer layout guidance, and the PCB should provide suitable copper area for heat spreading and low-impedance supply distribution. Firmware must also verify the device's low-power wake-up behavior against the response time required by the end application.
This page combines manufacturer specifications, package and sourcing details, practical application guidance, and verified comparison information. It is intended to help engineers assess whether the STM8L151K3U3's memory size, I/O count, clock rate, voltage range, and low-power architecture match a specific embedded-control design.
חלופות תחליף ישיר עבור STM8L151K3U3 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם STM8L151K3U3 (אותו גורם צורה וטביעת רגל) — שונים ב CPU Architecture, Product Type.
STM8L151K3U6
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←STM8L151K3U3 דירוגים מרביים ומאפיינים חשמליים
| Product Type | 8-bit ultra-low-power microcontroller (MCU) |
| Series | STM8L EnergyLite |
| Maximum CPU Frequency | 16 MHz |
| Core Performance | 16 MIPS |
| CPU Architecture | Enhanced STM8 8-bit core |
| Flash Memory | 8 KB (8K x 8) |
| מתח אספקה פעיל | 1.8 V to 3.6 V |
| I/O Port Count | 41 |
| מארז | 32-pin UFQFPN (5 x 5 mm) with exposed pad |
| מספר פינים | 32 pins |
| סוג הרכבה | Surface mount |
| Packaging Format | Tray |
| סטטוס מחזור חיים | Active |
מדריך תצורת פינים של STM8L151K3U3 32-pin ufqfpn (5 x 5 mm) with exposed pad
תצורת פינים עבור STM8L151K3U3 (מארזת 32-pin ufqfpn (5 x 5 mm) with exposed pad). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור STM8L151K3U3.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
STM8L151K3U3 מתאים עבור 6 יישוםs: Battery-Powered Sensor Node, Industrial Condition Monitoring, Building and Access Control, Portable Measurement Instrument, Low-Power Communications Endpoint, Smart Sensor Controller.
Battery-Powered Sensor Node
The STM8L151K3U3 fits battery-powered sensing designs that require an 8-bit control engine, 8 KB of Flash, and up to 41 I/O ports without adopting a larger microcontroller package. Its 1.8 V to 3.6 V operating range supports low-voltage sensor and energy-harvesting architectures. The 16 MHz enhanced STM8 core can manage acquisition, filtering, threshold decisions, and local communications while the system spends most of its time in a low-power state. Design validation should measure wake-up latency, average current, and sensor duty cycle because those system-level parameters determine the useful battery life.
מומלץ
Industrial Condition Monitoring
The STM8L151K3U3 is suitable for compact condition-monitoring modules that combine several digital inputs with limited local processing. Its 41 available I/O ports provide substantial connectivity for switch states, alarm lines, and discrete sensor channels, while the 16 MHz core can perform timing, filtering, and event classification. The 1.8 V minimum operating voltage supports integration with low-voltage industrial sensor chains, and the 32-pin UFQFPN keeps the controller compact. Firmware should include debounce and diagnostic routines, while the PCB must preserve clean supply distribution for attached field sensors.
מומלץ
Building and Access Control
The STM8L151K3U3 fits access-control and building-automation nodes that monitor doors, request-to-exit signals, key inputs, and actuator commands. Its 41 I/O ports allow one controller to handle multiple digital functions, and the 8 KB Flash capacity is appropriate for compact protocol and event-management firmware. The wide 1.8 V to 3.6 V supply range provides flexibility across low-voltage security equipment. Designers should allocate pins for reset and clock requirements, use the exposed pad as directed, and define safe states for locks and relays during resets or low-power transitions.
מומלץ
Portable Measurement Instrument
The STM8L151K3U3 is appropriate for a compact handheld measurement instrument that combines digital sensing, local indication, and a low-power serial interface. Its 16 MHz enhanced STM8 core provides enough throughput for measurement sequencing and control, while 41 I/O ports reduce the need for external logic. The device's 1.8 V to 3.6 V range allows integration with low-energy sensor front ends and 3.3 V peripherals. Battery life depends on display and sensor duty cycles, so firmware should disable unused blocks promptly and validate the total sleep current at the system level.
מומלץ
Low-Power Communications Endpoint
The STM8L151K3U3 can serve as the control endpoint in a compact communications module that must wake periodically, exchange data, and return to a low-energy state. The 8 KB Flash budget is suitable for small protocol stacks and application logic, while the 41 I/O ports provide local control lines. Its 16 MHz core supports timely framing and state management without a large 32-bit processor. The key engineering trade-off is firmware footprint: add the selected radio or communication driver's memory requirements before finalizing the 8 KB device, and confirm that peripheral sharing does not conflict with assigned I/O.
מומלץ
Smart Sensor Controller
The STM8L151K3U3 is well suited to smart sensors that sample physical inputs, apply thresholds, maintain operating state, and report results over a serial or digital interface. Its 8 KB Flash stores the sensor-specific algorithm and communication logic, while the enhanced STM8 core reaches up to 16 MIPS at 16 MHz. The 41 I/O ports allow multiple sensor inputs and status outputs within one compact 5 mm by 5 mm UFQFPN package. Power-management firmware should coordinate sensor warm-up time and data conversion, and the final design must verify the accuracy and timing of every peripheral used by the selected sensor.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור STM8L151K3U3 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | STM8L151K3U6 |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Package | 32-UFQFPN (5x5) | 32-UFQFPN (5x5) |
| Product Type | 8-bit ultra-low-power MCU | 8-bit ultra-low-power MCU |
| Flash Memory | 8 KB | 8 KB |
| Packaging Format | Tray | Tray |
מבדילים עיקריים
- Low-density memory profile supports compact control firmware (לעומתSTM8L152K6U6)
- High I/O availability for embedded control (לעומתSTM8L101K3U6)
- Same-package STMicroelectronics replacement path (לעומתSTM8L151K3U6)
הערות תכנון
Follow the manufacturer's 32-pin UFQFPN land pattern and exposed-pad recommendation exactly. Place the exposed-pad connection to ground or the specified pad net, preserve thermal-via allowance, and avoid copper obstructions beneath the package that could interfere with assembly or heat spreading. Use the package drawing to confirm pin-one orientation because the exposed pad and perimeter pads are not visually symmetrical.
Design the supply path for the full 1.8 V to 3.6 V operating range and place local decoupling close to the device's supply and ground pins. For a battery-powered product, calculate average current from processor activity, sensor loads, radio bursts, and leakage rather than processor current alone. Validate that the regulator can support the peak load without pushing the MCU or peripherals outside their operating limits.
Firmware and pin planning should account for the device's limited 8 KB Flash allocation and multifunction peripheral pins. Avoid assigning a peripheral function that conflicts with an intended GPIO, and reserve all required clock, reset, and debug connections before layout release. Confirm the exact temperature grade and ordering suffix during production review, since suffix changes can alter grade-specific requirements.
Keep switching-regulator traces, sensor inputs, and communication interfaces away from sensitive control paths where practical. Route supply and ground returns to minimize loop area, use a continuous ground reference beneath signal routes, and maintain the manufacturer's recommended spacing around exposed-pad vias. After assembly, inspect exposed-pad soldering and verify rail startup behavior across the expected input range.
מידע על תאימות
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for the exact MPN. Confirm these declarations with STMicroelectronics before regulatory qualification.
