Microchip Technology

SY89430VZC - 950 MHz Programmable Clock Synthesizer | Microchip

MPN: SY89430VZC ✓ פעיל
3.135 V to 5.25 V Vdss 28-pin SOIC Package 950 MHz Speed
כמות הזמנה מינימלית: 1 |

SY89430VZC סקירה

The Microchip Technology SY89430VZC is a programmable frequency-synthesizer clock IC operating up to 950 MHz and packaged in a 28-pin SOIC. It provides a selectable 5 V or 3.3 V operating supply, a VCO covering 400 MHz to 950 MHz, and programmable output frequencies from 50 MHz to 950 MHz. The device also supports serial and parallel configuration interfaces for system clock generation and programmable frequency control.

A frequency synthesizer is a timing IC that uses a voltage-controlled oscillator, or VCO, and phase-locked-loop techniques to generate stable clock signals at programmable frequencies. It belongs to the clock and timing IC hierarchy, where it complements crystal oscillators, dividers, buffers, jitter cleaners, and clock distribution circuits. The SY89430VZC is intended for designs requiring multiple derived clocks, flexible frequency selection, or digitally controlled clock generation within a compact surface-mount package.

The principal feature of the SY89430VZC is its broad 950 MHz upper operating frequency. Its internal VCO spans 400 MHz to 950 MHz, while programmable synthesis covers a 50 MHz to 950 MHz output range. Configuration through serial and parallel interfaces allows system firmware or fixed hardware control to select operating parameters. A selectable 3.3 V or 5 V supply also permits integration into both 3.3 V and 5 V digital systems when the remaining interface and output requirements match.

The 28-SOIC package measures 7.50 mm in body width and is identified by the source listing as a 0.295-inch-width device. Its 28-pin footprint provides connections for power, grounding, configuration, clock outputs, and associated control functions. Exact pin assignments, output-drive characteristics, phase-noise values, reference requirements, and timing limits should be taken from the manufacturer pin-description and AC-parameter tables before the device is placed in a production schematic.

Typical applications include communications infrastructure, serial-interface clocking, high-speed digital test equipment, embedded processing systems, and clock-generation subsystems. In each case, the device can serve as the programmable timing source when a system needs more flexibility than a fixed-frequency crystal oscillator. The 50 MHz to 950 MHz synthesis range supports high-speed reference and communication-clock architectures without changing the physical package.

Layout is critical because a high-frequency oscillator and digital configuration signals must be isolated from sensitive analog or high-speed data paths. Place the device close to its decoupling network, route configuration signals away from oscillator-related nodes, and observe the grounding and return-current recommendations in the manufacturer datasheet. Validate output jitter, phase noise, rise time, load capability, and reference stability in the final load configuration.

This product record combines the manufacturer datasheet, distributor technical summaries, package information, and design-focused guidance for engineers evaluating the SY89430VZC. It also distinguishes the programmed frequency range from the VCO range and highlights configuration, layout, and validation issues that are important when comparing programmable clock synthesizers.

חלופות תחליף ישיר עבור SY89430VZC — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

אין חלופות תואמות Drop-in עבור מוצר זה.

בקשת חלופות

SY89430VZC מפרטים

Product Type Programmable frequency synthesizer clock IC
Maximum Frequency 950 MHz
Programmable Output Frequency Range 50 MHz to 950 MHz
Internal VCO Range 400 MHz to 950 MHz
Supply Voltage Range 3.135 V to 5.25 V
Programmable Supply Options 3.3 V or 5 V
Configuration Interfaces Serial and parallel
Package Type 28-pin SOIC
Package Body Width 7.50 mm
Package Width 0.295 inch
סוג הרכבה Surface mount
סטטוס RoHS Lead-free and RoHS compliant

מדריך תצורת פינים של SY89430VZC 0.295 inch

תצורת פינים עבור SY89430VZC (מארזת 0.295 inch). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 0.295 inch עבור SY89430VZC

אין נתוני פריסת פינים מפורטים עבור SY89430VZC.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

SY89430VZC מתאים עבור 6 יישוםs: Communications Clock Generation, High-Speed Digital Test Equipment, Embedded Processor Timing, Network Interface Clocking, Industrial Control Systems, Instrumentation and Measurement.

🌐

Communications Clock Generation

The SY89430VZC can provide a programmable high-speed clock for communications equipment whose operating mode changes with system configuration. Its output synthesis range of 50 MHz to 950 MHz covers clock and reference requirements above ordinary low-frequency oscillator ranges, while serial and parallel interfaces permit firmware-controlled or hardware-fixed setup. In a communications board, the synthesizer can reduce the number of separate clock sources required when several related frequencies share one architecture. The main engineering consideration is verifying reference-input stability, output jitter, phase noise, drive capability, and load behavior at the selected frequency.

🖥️

High-Speed Digital Test Equipment

The SY89430VZC is appropriate for test-equipment clock trees that benefit from selectable operating frequencies and compact integration. Programmable outputs from 50 MHz to 950 MHz can support timing references, trigger systems, or interface testing when the required clock rate is known only at configuration time. Serial control permits software-driven setup, while parallel control supports deterministic laboratory or production configurations. Engineers should characterize timing accuracy, jitter, output rise time, loading, and channel-to-channel behavior in the actual fixture because the synthesized clock's performance depends on the reference source and PCB environment.

⚡

Embedded Processor Timing

The SY89430VZC can act as a dedicated programmable timing source in embedded systems that require a clock independent of the processor's internal oscillator. Its 50 MHz to 950 MHz synthesis range supports high-speed interface, storage, and communication clock domains, and the selectable 3.3 V or 5 V supply supports mixed-voltage system integration. A practical implementation should use the serial interface for runtime configuration or the parallel interface for fixed startup behavior. Confirm logic-level compatibility, reference requirements, startup sequence, and maximum operating frequency before assigning it to a processor or peripheral clock input.

🌐

Network Interface Clocking

The SY89430VZC is suitable for network-interface modules that need a controlled high-frequency clock for serialization, recovery, or interface timing. Programmable synthesis allows one device to support several operating modes without changing the oscillator package, while the 28-SOIC format permits integration with conventional surface-mount assembly. The principal design concern is keeping the reference and oscillator paths away from sensitive data lines to prevent coupling. System validation should cover jitter margin, reference drift, supply sensitivity, output impedance, and operation across the full 50 MHz to 950 MHz programmable range.

🏭

Industrial Control Systems

The SY89430VZC can supply deterministic timing in industrial control systems where several subsystems require related but selectable clock frequencies. Serial programming enables configuration as part of system startup, while parallel programming can establish a fixed state with simple logic. Its 3.3 V and 5 V supply options can simplify integration into mixed industrial boards, but the complete operating-temperature specification must be checked against the enclosure and ambient conditions. Robust designs should also assess electromagnetic coupling, reference stability, power-supply rejection, and behavior during startup or reconfiguration.

🔧

Instrumentation and Measurement

The SY89430VZC is useful in instrumentation systems where the reference clock may need to change according to the selected measurement mode. Its 50 MHz to 950 MHz programmable range offers more flexibility than a fixed crystal source, and dual serial and parallel control paths support both instrument firmware and manufacturing configuration. For sensitive analog measurements, the synthesized clock should feed digital control sections without sharing high-current return paths with precision analog nodes. Validate phase noise, jitter, spurious content, and clock-to-data timing in the complete instrument to ensure that the synthesizer does not limit measurement accuracy.

What is the SY89430VZC?
The SY89430VZC is a Microchip Technology programmable frequency-synthesizer clock IC that generates output frequencies from 50 MHz to 950 MHz. Its internal VCO operates from 400 MHz to 950 MHz, and the device supports both serial and parallel configuration interfaces. The IC is housed in a 28-pin SOIC package, making it suitable for compact communications, test, and digital-system clock-generation designs.
What is the operating frequency range of SY89430VZC?
The SY89430VZC supports programmable output frequencies from 50 MHz to 950 MHz, while its internal VCO covers 400 MHz to 950 MHz. These two ranges describe different functions: the VCO establishes the oscillator operating region, and the synthesis section divides or shapes that signal to produce the requested output. Use the manufacturer AC characteristics and configuration tables for each supported output mode.
What supply voltage does the SY89430VZC use?
The SY89430VZC operates from 3.135 V to 5.25 V and supports programmable 3.3 V or 5 V supply configurations. Component listings identify the device as a 5 V and 3.3 V programmable frequency synthesizer. Confirm that the selected configuration satisfies all input thresholds, output-level requirements, and decoupling recommendations in the manufacturer datasheet.
Where can I download the SY89430VZC datasheet PDF?
The official SY89430VZC datasheet PDF is available from Microchip Technology at https://ww1.microchip.com/downloads/en/DeviceDoc/sy89430v.pdf. It contains the complete pin descriptions, interface configuration procedures, timing tables, and application information needed for design work. Use the pin-description table when assigning PCB tracks and the AC-parameter section when setting clock-generation requirements.
Where is the SY89430VZC pinout?
The SY89430VZC pinout is documented in the pin-description section of the Microchip Technology SY89430V datasheet. The device uses a 28-pin SOIC package, and its numbered pins cover supply, ground, configuration, reference, and clock-output functions. Assign every connection from the official pin table rather than relying on a third-party visual diagram, because exposed or reserved functions must be handled according to the manufacturer's instructions.
What can replace the SY89430VZC?
A drop-in replacement for the SY89430VZC must use the same 28-SOIC footprint, preserve pin-to-pin connections, and provide equivalent frequency, supply, interface, and output behavior. No independently verified cross-manufacturer drop-in replacement was identified for this exact device. Before substituting any part, compare the pin table, configuration protocol, reference requirements, output levels, jitter, phase noise, and operating-temperature range rather than relying only on matching the package.
Is there a Microchip cross-reference for SY89430VZC?
Microchip Technology provides a cross-reference search for comparing its clock and timing devices with competitor products, but no specific Microchip or cross-brand equivalent is established by the available technical record. Search using the exact base function and then verify compatibility rather than treating a generic PLL as a drop-in replacement. The decisive checks are the 28-SOIC pinout, 50 MHz to 950 MHz synthesis range, serial and parallel interfaces, supply range, and output characteristics.
When should I choose the SY89430VZC over a fixed-frequency oscillator?
Choose the SY89430VZC when a design needs a programmable clock, multiple system-controlled operating modes, or output frequencies above the practical range of a conventional crystal oscillator. A fixed-frequency oscillator is simpler when the required frequency is known permanently and phase-noise or jitter requirements are modest. The synthesizer's higher integration and programmability add design complexity, so simple clocks should not be replaced unnecessarily.
Is the SY89430VZC suitable for communications equipment?
The SY89430VZC is suitable for communications clock-generation subsystems requiring programmable frequencies up to 950 MHz. Its serial and parallel control paths permit fixed configuration or firmware-controlled frequency selection, while the 28-SOIC package supports compact board layouts. Final suitability depends on the required reference frequency, output jitter, phase noise, output drive, channel performance, and environmental conditions.
How is the SY89430VZC programmed?
The SY89430VZC can be configured through serial or parallel interfaces. During serial programming, the manufacturer specifies that S_DATA must satisfy setup and hold timing, and the configuration registers latch when P_LOAD is held high and S_LOAD transitions from high to low. Use the exact interface timing, data ordering, and programming sequence from the manufacturer datasheet when designing firmware or fixed-control logic.
What is the difference between SY89430VZC and SY89430VZC-TR?
SY89430VZC and SY89430VZC-TR identify the same underlying frequency-synthesizer function in a 28-SOIC package, with the suffix distinction primarily identifying the orderable packaging format. The -TR version is associated with tape-and-reel ordering. It is not a distinct electrical substitute with different performance, so procurement decisions should focus on package quantity, assembly handling, and manufacturing format rather than expected frequency or pin-compatibility differences.
Where can I buy SY89430VZC online?
Use the Request a Quote form on this page to request SY89430VZC availability, current lead time, and order confirmation. The part is listed as a 28-SOIC programmable frequency synthesizer from Microchip Technology. A procurement response should also confirm the required package quantity, whether tape-and-reel handling is acceptable, and whether any traceable supply or date-code requirements apply to the application.
What is the price of SY89430VZC?
Current commercial pricing for the SY89430VZC should be requested through the Request a Quote form on this page. The submitted request should identify the exact MPN, SY89430VZC, and the required order quantity so the supplier can confirm package availability and current commercial terms. Engineers should not rely on an archived unit price because programming-interface demand, lifecycle status, and order packaging can affect the final quotation.
Is SY89430VZC in stock and what is its lead time?
Current inventory and lead time for SY89430VZC should be confirmed through the Request a Quote form on this page. The Request a Quote response is the appropriate commercial channel because stock levels vary by package quantity and order format. Include your required quantity, target date, acceptable delivery schedule, and whether full manufacturer traceability is required when submitting the request.
What are the key specifications of SY89430VZC that engineers should know?
The key SY89430VZC specifications are a 50 MHz to 950 MHz programmable output range, a 400 MHz to 950 MHz internal VCO range, serial and parallel configuration, selectable 3.3 V or 5 V operation, and a 28-SOIC package measuring 7.50 mm wide. It is a clock-generation IC rather than a general-purpose timer, and final design approval should also verify reference input, jitter, phase noise, output drive, and temperature limits.

נתוני עזר הנדסיים עבור SY89430VZC — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the SY89430VZC when the design requires programmable frequencies across 50 MHz to 950 MHz, serial or parallel control, or multiple clock modes from a single timing device. It is particularly useful in communications, instrumentation, test equipment, and embedded systems where a fixed crystal oscillator cannot adapt to the operating mode. A fixed-frequency crystal remains preferable for a permanently defined low-frequency clock because it is simpler and generally requires fewer configuration and validation steps. Before choosing a substitute, require the same 28-SOIC footprint and verify pin assignments, reference-input requirements, output levels, jitter, phase noise, supply range, configuration protocol, and temperature limits. The SY89430VZC-TR suffix identifies an orderable packaging format rather than a different electrical function, so it should not be treated as a performance upgrade.

השוואה עם חלופות

פרמטר מוצר זה
Product Type Programmable frequency synthesizer clock IC
Brand Microchip Technology
Package 28-pin SOIC
Maximum Frequency 950 MHz
Programmable Output Frequency Range 50 MHz to 950 MHz
Internal VCO Range 400 MHz to 950 MHz
Supply Voltage Range 3.135 V to 5.25 V
Configuration Interfaces Serial and parallel
Programmable Supply Options 3.3 V or 5 V
Package Body Width 7.50 mm

מבדילים עיקריים

  • Wide programmable synthesis range (לעומתConventional fixed-frequency crystal oscillator)
  • Two configuration paths support flexible system integration (לעומתFixed oscillator without programmable control)
  • Integrated synthesis reduces multi-clock design effort (לעומתDiscrete oscillator and divider implementation)

הערות תכנון

Keep the SY89430VZC reference and oscillator-related traces short, continuous, and separated from high-speed data, clock outputs, and switching-power connections. Route S_DATA and S_LOAD away from sensitive nodes, and provide a low-impedance ground return for every ground connection. The manufacturer's layout example should be used as the basis for trace placement, especially because the device supports clocks up to 950 MHz.

Place the required supply-decoupling network directly beside the corresponding SY89430VZC power pins and minimize the loop area between the capacitor and the device. Verify the exact pin names, voltage selection, capacitor values, and permitted supply combinations in the manufacturer datasheet before layout release. Because this is a high-frequency timing IC, stable local supply return is necessary to prevent reference jitter and configuration errors.

Validate output rise time, jitter, phase noise, and load current in the final PCB rather than relying only on nominal frequency. Account for trace loss, connector loading, series or parallel termination, and the impedance of the receiving device when driving long routes. If the synthesized clock drives a high-speed link, use measurement equipment and test patterns that expose setup and hold margin changes as the output frequency approaches 950 MHz.

Do not confuse the 50 MHz to 950 MHz programmable output range with the 400 MHz to 950 MHz internal VCO range. Also observe the serial programming protocol: S_DATA must satisfy setup and hold timing, and configuration values latch on the specified S_LOAD transition while P_LOAD remains high. Incorrect control sequencing can prevent the expected frequency from being selected even when the reference and supply connections are correct.

מידע על תאימות

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Yes
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

A distributor product listing identifies the SY89430VZC as lead-free and RoHS compliant. No additional REACH, AEC-Q100, halogen-free, or conflict-minerals declaration is established by the available product record.

הנתונים אומתו בתאריך: 2026-11-16 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

SY89430VZC datasheet SY89430VZC pinout SY89430VZC datasheet pdf SY89430VZC equivalent SY89430VZC replacement SY89430VZC cross reference SY89430VZC price SY89430VZC stock Microchip SY89430VZC SY89430VZC 950 MHz synthesizer SY89430VZC SOIC-28 footprint SY89430VZC communications clock

רכיבים ומונחים קשורים

Microchip Technology Micrel Semiconductor SY89430VZC SY89430VZC-TR programmable frequency synthesizer frequency synthesizer IC clock generator clock and timing IC phase-locked loop voltage-controlled oscillator VCO serial programming interface parallel programming interface S_DATA S_LOAD P_LOAD output frequency phase noise clock jitter 28-pin SOIC surface mount RoHS lead-free communications equipment test and measurement
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר