Microchip Technology

SY89537LMG - 3.3V LVPECL/LVDS Clock Synthesizer | Microchip

MPN: SY89537LMG ✓ פעיל
3.3 V Vdss 44-VFQFN exposed pad, 44-MLF Package LVPECL and LVDS differential outputs Speed
כמות הזמנה מינימלית: 1 |

SY89537LMG סקירה

The Microchip Technology SY89537LMG is a 3.3 V programmable multiple-output bank clock synthesizer and fanout buffer with LVPECL and LVDS outputs, housed in a 44-VFQFN exposed-pad package rated to 756 MHz. It belongs to the Precision Edge clock-generation family for enterprise switch, router, and multiprocessor server systems.

A programmable clock synthesizer is an integrated timing device that uses a phase-locked loop to derive one or more precisely related output frequencies from a common reference clock. Clock generators and PLLs sit inside the broader clock-and-timing IC category, where they support system timing, interface clocking, serialization, and multi-domain clock distribution. The SY89537L family combines frequency synthesis with fanout so a single reference can feed several circuits with matched or related clocks.

Principal features include programmable output generation, LVPECL and LVDS differential clock support, multiple output banks, and integrated fanout capability. The 3.3 V supply and high-speed differential outputs suit processor, networking, and storage systems that require deterministic clock distribution across long PCB traces. A 756 MHz family capability and a 44-VFQFN exposed-pad package allow compact implementation in space-constrained communication equipment.

The device is intended for precision PLL-based clock generation rather than general-purpose waveform synthesis. Its differential outputs reduce sensitivity to common-mode noise compared with single-ended clock distribution, while the fanout section helps prevent one source from driving multiple loads directly. Configuration data and register programming determine the output frequencies and operating behavior.

Typical uses include enterprise network switches, layer-3 routers, multiprocessor servers, line cards, and other equipment that distributes high-speed clocks to multiple processors, transceivers, serializers, or memory subsystems. The SY89537L family is specifically optimized for generating internal system clocks in these platforms.

PCB design should preserve the differential impedance of each LVPECL or LVDS pair and provide the exposed pad with a low-impedance thermal and return-path connection. Follow the manufacturer’s pin-description table and reference layout when assigning inputs, configuration pins, supply rails, and output pairs.

This page combines the manufacturer’s family description, package information, clock-output capabilities, and application positioning with practical replacement guidance and design notes that help engineers evaluate the SY89537LMG for existing PCB revisions.

חלופות תחליף ישיר עבור SY89537LMG — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

SY89537LMY

✅ Drop-In
📦 44-VFQFN exposed pad, 44-MLF
Same 44-VFQFN clock-synthesizer family and LVPECL/LVDS output architecture; ordering-code grade differs, with published frequency capability of 756 MHz.

📋 חלופה להתייחסות (לא בקטלוג)

SY89537LMHTR

✅ Drop-In
📦 44-VFQFN exposed pad, 44-MLF
Same Microchip SY89537L clock-generation family; temperature-grade and tape-and-reel ordering identifiers differ from the LMG code.

📋 חלופה להתייחסות (לא בקטלוג)

SY89537LMG-TR

✅ Drop-In
📦 44-VFQFN exposed pad, 44-MLF
Identical SY89537LMG base device with a tape-and-reel ordering suffix; electrical functions remain unchanged.

📋 חלופה להתייחסות (לא בקטלוג)

SY89537L

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 44-VFQFN exposed pad, 44-MLF
Same manufacturer clock-synthesis family; ordering suffix and grade must be selected to match the required electrical and environmental configuration.

📋 חלופה להתייחסות (לא בקטלוג)

SY89537LMG מפרטים

Product Type Programmable multiple-output bank clock synthesizer and fanout buffer
Product Family SY89537L Precision Edge clock-generation family
מתח אספקה 3.3 V
Clock Output Logic LVPECL and LVDS differential outputs
תדר שעון מקסימלי 756 MHz
Architecture Precision PLL-based clock generation with fanout
תצורת מוצא Programmable multiple output banks
מארז 44-VFQFN exposed pad, 44-MLF
מספר פינים 44 pins
סוג הרכבה Surface mount
סטטוס RoHS unknown
REACH Status unknown
Primary Markets Enterprise switches, routers, and multiprocessor server applications

מדריך תצורת פינים של SY89537LMG 44-vfqfn exposed pad, 44-mlf

תצורת פינים עבור SY89537LMG (מארזת 44-vfqfn exposed pad, 44-mlf). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 44-vfqfn exposed pad, 44-mlf עבור SY89537LMG

אין נתוני פריסת פינים מפורטים עבור SY89537LMG.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

SY89537LMG מתאים עבור 6 יישוםs: Enterprise Network Switch Clocking, Multiprocessor Server Clock Distribution, Layer-3 Router Timing, Processor and Fabric Clock Trees, High-Speed Transceiver Clock Feed, Line Card and Communication Equipment.

🌐

Enterprise Network Switch Clocking

The SY89537LMG fits enterprise switch clock trees that require multiple related clocks for line-card processors, network processors, transceivers, and management controllers. Its 3.3 V precision PLL-based synthesis, programmable output banks, and LVPECL/LVDS differential outputs let a single reference source feed several clock domains. The 44-VFQFN exposed-pad package also supports compact line-card layouts. The principal design consideration is maintaining continuous differential-impedance routing on every clock pair, with the exposed pad connected to the appropriate ground and thermal structure.

🖥️

Multiprocessor Server Clock Distribution

The SY89537LMG is suited to multiprocessor server platforms where processors, memory controllers, fabric links, and I/O modules require deterministic, related clock signals. Multiple programmable output banks allow fanout without placing a separate driver directly on every load, while LVPECL and LVDS support robust high-speed transmission over controlled-impedance traces. Operation within the 756 MHz family capability supports demanding interconnect timing. Engineers should verify channel allocation, PLL divider ranges, and jitter limits for the target processor configuration before releasing the layout.

🌐

Layer-3 Router Timing

In a layer-3 router, the SY89537LMG can organize a common reference into several system and interface clocks. This is valuable where packet-processing logic, management processors, transceivers, and backplane interfaces need deterministic relationships between their operating clocks. Differential LVPECL and LVDS outputs reduce susceptibility to common-mode disturbance and provide a suitable interface for long, impedance-controlled PCB routes. Confirm output-divider programming and the supported frequency range for each clock domain in the manufacturer configuration documentation.

⚡

Processor and Fabric Clock Trees

The SY89537LMG can serve as the central timing component in a processor or switching-fabric clock tree because it combines programmable frequency synthesis with fanout. Its multiple output banks allow related clocks to reach processors, fabric interfaces, serializers, and supporting logic from a common reference. The 44-VFQFN exposed-pad footprint keeps placement compact, and differential outputs are appropriate for high-speed distribution. Power and ground layout should isolate the clock supply from switching converters to avoid modulating the reference or increasing output jitter.

📡

High-Speed Transceiver Clock Feed

The SY89537LMG is appropriate for feeding clock signals into high-speed transceiver and serializer sections that benefit from differential LVPECL or LVDS signaling. Programmable output banks allow the same synthesized clock to fan out to several links, reducing the need for separate clock-driver stages. Differential routing also supports controlled impedance and improved noise immunity compared with single-ended distribution. Exact output frequency, amplitude, termination, and AC coupling requirements must follow the receiver specifications and the manufacturer’s reference layout.

🏭

Line Card and Communication Equipment

The SY89537LMG supports compact line-card and communication-equipment designs that need several synchronized clocks within limited board area. Its 3.3 V operation, programmable output banks, and LVPECL/LVDS outputs suit modules containing processors, optical interfaces, packet-processing engines, or external transceivers. The exposed-pad package requires careful thermal-via placement so the device can dissipate internal PLL power without introducing excessive temperature-dependent timing variation. Keep sensitive routing away from high-current switching paths and follow the recommended layer stack.

סיכום מוצרים מומלצים

SY89537LMY Same-family clock synthesizer ordering variant בשימוש ב-: Enterprise Network Switch Clocking, Multiprocessor Server Clock Distribution, Processor and Fabric Clock Trees, Line Card and Communication Equipment SY89537LMG-TR Same-device tape-and-reel ordering variant בשימוש ב-: Enterprise Network Switch Clocking, Layer-3 Router Timing, High-Speed Transceiver Clock Feed SY89537LMHTR Same-family device for grade-specific designs בשימוש ב-: Multiprocessor Server Clock Distribution, Layer-3 Router Timing, High-Speed Transceiver Clock Feed, Line Card and Communication Equipment SY89537L Family reference for SY89537LMG configuration בשימוש ב-: Processor and Fabric Clock Trees
What is the SY89537LMG?
The SY89537LMG is a 3.3 V precision PLL-based clock synthesizer and fanout buffer with programmable multiple output banks. According to the Microchip SY89537L product page, it provides LVPECL and LVDS differential clock outputs for enterprise switch, router, and multiprocessor server systems. The device is offered in a 44-VFQFN exposed-pad package.
What is the maximum clock frequency of the SY89537LMG?
The SY89537LMG family supports clock operation up to 756 MHz. The 756 MHz value is identified for the closely related SY89537LMY ordering code, which uses the same 44-VFQFN exposed-pad package and is identified as an LVPECL/LVDS clock and frequency synthesizer. Confirm the exact operating mode and output-divider settings in the manufacturer datasheet.
Where can I download the SY89537LMG datasheet PDF?
The official SY89537L family documentation is available from the Microchip product page at https://www.microchip.com/en-us/product/SY89537L. The PDF mirror listed for the Micrel SY89537LMG is available at https://www.alldatasheet.com/datasheet-pdf/pdf/176093/MICREL/SY89537LMG.html. Use the manufacturer copy for design release and verify the ordering-code suffix before signing off a BOM.
Where is the SY89537LMG pinout and package drawing?
The SY89537LMG uses a 44-VFQFN exposed-pad package with 44 leads, also identified as 44-MLF. Pin assignments and the land pattern should be taken from the Mechanical Drawings and Pin Description sections of the Microchip or Micrel SY89537LMG datasheet. The exposed pad is a land-pattern and thermal feature and must not be treated as an interchangeable signal pin.
What clock outputs does the SY89537LMG provide?
The SY89537LMG provides programmable LVPECL and LVDS differential clock outputs arranged in multiple output banks. Microchip describes the SY89537L as a programmable clock synthesizer and fanout optimized for internal system-clock generation. Differential outputs support high-speed clock distribution by maintaining signal integrity over controlled-impedance PCB traces.
Is the SY89537LMG suitable for enterprise switches and routers?
Yes. The SY89537LMG is optimized for enterprise switch, router, and multiprocessor server applications according to the Microchip SY89537L family description. Its combination of PLL-based synthesis, programmable output banks, LVPECL/LVDS outputs, and fanout makes it appropriate for systems that require several related clocks distributed to processors, transceivers, or interface controllers.
What can replace the SY89537LMG?
The closest documented alternatives are SY89537LMY, SY89537LMHTR, and SY89537LMG-TR, all from the Microchip clock-synthesizer family and associated with 44-lead VQFN orderings. Pin-to-pin suitability depends on temperature grade, tape-and-reel suffix, and programmed register configuration. Verify the exact ordering code and timing requirements before replacing an existing design.
What is the difference between SY89537LMG and SY89537LMY?
SY89537LMG and SY89537LMY are ordering variants within the Microchip SY89537L precision clock-synthesizer family. The published listings identify SY89537LMY as a 44-VFQFN exposed-pad LVPECL/LVDS clock and frequency synthesizer rated to 756 MHz. The distinguishing fields are the order codes and their associated grade or packing identifiers, which must be checked before substitution.
When should I choose SY89537LMG instead of SY89537LMHTR?
Choose SY89537LMG when its documented temperature grade, ordering suffix, and programmed configuration match the target application. Choose SY89537LMHTR only after confirming its grade and suffix satisfy the equipment’s environmental and manufacturing requirements. Both appear in the same Microchip clock-generator family, but the ordering-code suffix alone does not prove every production configuration is interchangeable.
Is the SY89537LMG suitable for multiprocessor server clock trees?
The SY89537LMG is specifically optimized for multiprocessor server clock generation and distribution. Its PLL-based synthesis and fanout capability allow one reference clock to support multiple related outputs, while LVPECL and LVDS provide differential signaling for high-speed links. Actual channel count, frequency coverage, and jitter performance must be confirmed for the specific server topology.
How should LVPECL and LVDS clock outputs be routed on the PCB?
Route each LVPECL or LVDS output as a controlled-impedance differential pair with continuous reference plane beneath the traces, matched pair spacing, and minimal layer changes. Terminate the pairs according to the receiver and system topology specified in the manufacturer design guidance. Keep the output and return paths away from switching-power nodes to minimize common-mode noise and jitter injection.
What are the key specifications engineers should know about the SY89537LMG?
The SY89537LMG is a 3.3 V precision PLL-based programmable clock synthesizer and fanout buffer with LVPECL and LVDS outputs, multiple output banks, operation up to 756 MHz within the documented family, and a 44-VFQFN exposed-pad package. It is optimized for enterprise switches, routers, and multiprocessor servers. Exact output count, divider ranges, and jitter limits require confirmation in the datasheet.
Where can I buy the SY89537LMG online?
Use the Request a Quote form on this page to request current availability, lot traceability, and a formal quotation for the SY89537LMG. The part is identified as a 44-VFQFN exposed-pad Microchip clock synthesizer, and the exact ordering suffix should be confirmed before submitting a purchase request.
What is the price of the SY89537LMG?
Current commercial pricing is generated through the Request a Quote form on this page rather than displayed as a static value. Submit the exact MPN, target quantity, and required packaging information so the quotation can reflect current component availability and volume handling.
What is the lead time and stock status for the SY89537LMG?
Request current stock position, minimum order quantity, and lead time through the Request a Quote form on this page. Include the required date code, packaging suffix, and production quantity with the request so scheduling can be evaluated against the complete procurement requirement.

נתוני עזר הנדסיים עבור SY89537LMG — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the SY89537LMG for a new design that needs a 3.3 V precision PLL-based clock synthesizer with programmable multiple output banks, LVPECL/LVDS outputs, and fanout in a 44-VFQFN exposed-pad package. It is particularly well aligned with enterprise switches, routers, and multiprocessor servers. Select SY89537LMY when that documented ordering option matches the required grade and production configuration. Use SY89537LMHTR when its temperature-grade designation satisfies the equipment specification, and use SY89537LMG-TR for the identical base device supplied in tape-and-reel format. For any substitution, verify the pin-description table, output assignments, PLL programming, reference requirements, package drawing, and exposed-pad layout. Do not treat a shared family designation or package name as proof that programming and environmental requirements are identical.

השוואה עם חלופות

פרמטר מוצר זה SY89537LMY SY89537LMHTR SY89537LMG-TR SY89537L
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 44-VFQFN exposed pad, 44-MLF 44-VFQFN exposed pad, 44-MLF 44-VFQFN exposed pad, 44-MLF 44-VFQFN exposed pad, 44-MLF 44-VFQFN exposed pad, 44-MLF
Product Type Programmable multiple-output bank clock synthesizer and fanout Clock/frequency synthesizer Clock generator and frequency synthesizer Programmable clock synthesizer and fanout Precision PLL-based clock synthesizer and fanout
Supply Voltage 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V
Output Logic LVPECL and LVDS LVPECL and LVDS LVPECL and LVDS LVPECL and LVDS LVPECL and LVDS
Maximum Clock Frequency 756 MHz 756 MHz 756 MHz 756 MHz 756 MHz
Output Architecture Programmable multiple output banks with fanout Programmable multiple-output bank Programmable multiple-output bank Programmable multiple-output bank Programmable multiple-output bank
Target Application Enterprise switch, router, and multiprocessor server timing Enterprise switch, router, and server timing Enterprise switch, router, and server timing Enterprise switch, router, and server timing Enterprise switch, router, and server timing

מבדילים עיקריים

  • Combines programmable synthesis with multi-bank fanout (לעומתSY89537LMY)
  • Direct 756 MHz-class family capability (לעומתSY89537LMHTR)
  • Same electrical device with orderable tape-and-reel packaging (לעומתSY89537LMG-TR)

הערות תכנון

Route LVPECL and LVDS outputs as controlled-impedance differential pairs over a continuous reference plane. Maintain consistent pair geometry through vias, avoid unnecessary layer transitions, and keep clocks away from switching-power loops. The exposed pad requires a low-impedance ground connection and thermal vias according to the manufacturer land pattern so the internal PLL can dissipate power without excessive junction-temperature rise.

Use the manufacturer pin-description table to identify each differential output pair, reference input, configuration interface, supply connection, and ground pin. Do not route signals into the exposed-pad area. Place decoupling capacitance at the device-side supply and ground pins rather than near the power entry point, and confirm that the programmed output bank corresponds to the intended physical clock pair on the PCB.

Treat the reference clock and high-speed outputs as coupled transmission-line systems. Match differential impedance to the receiver configuration, use the termination scheme specified by the system designer, and avoid stubs or long unterminated branches. Validate eye margin, jitter, and clock-pair skew with the actual receiver and enclosure because package and board transitions affect the usable timing margin.

Keep the 3.3 V clock supply free from switching-converter ripple and supply noise. Separate the clock-supply filtering network from high-current load paths, use short power and ground connections, and provide local high-frequency bypass capacitance. Because PLL phase noise and output jitter can be affected by reference and supply noise, the clocking rails should not share unfiltered paths with processors or transceivers.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The available product information confirms the Microchip origin, 44-VFQFN exposed-pad package, 3.3 V operation, and Precision Edge clock-generator family. RoHS, REACH, halogen-free, and conflict-minerals declarations were not identified and are recorded as unknown.

הנתונים אומתו בתאריך: 2026-11-16 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

SY89537LMG datasheet SY89537LMG pinout SY89537LMG datasheet pdf SY89537LMG specifications SY89537LMG 44 VFQFN SY89537LMG LVPECL LVDS SY89537LMG clock synthesizer SY89537LMG enterprise switch SY89537LMG server timing SY89537LMG replacement SY89537LMG vs SY89537LMY SY89537LMG equivalent Microchip SY89537LMG SY89537LMG price SY89537LMG stock

רכיבים ומונחים קשורים

Microchip Technology Micrel SY89537LMG SY89537LMY SY89537LMHTR SY89537LMG-TR SY89537L Precision Edge programmable clock synthesizer clock generator phase-locked loop PLL fanout buffer LVPECL LVDS differential clock output 44-VFQFN 44-MLF exposed pad surface-mount IC clock-and-timing IC enterprise switch layer-3 router multiprocessor server output jitter reference clock
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר