TAS5076PFCR - 6-Channel Digital Audio PWM Processor | TI
MPN: TAS5076PFCR ✓ פעילTAS5076PFCR סקירה
A digital audio PWM processor belongs to the class of audio DSPs and digital-to-analog conversion devices used to translate digital audio information into pulse-width-modulated drive signals. Within the signal chain, it operates between a digital audio interface and a power-amplifier stage. Its six-channel architecture allows one processor to manage multiple audio paths while reducing the number of discrete control and modulation functions required in a multichannel amplifier design.
Key characteristics include six independent audio-modulator channels, a 3.0 V to 3.6 V operating-supply range, 32 kHz to 192 kHz sample-rate support, and an 80-pin TQFP package. The 12 mm square package provides a defined PCB land pattern with exposed component sides suitable for automated assembly. These characteristics make the TAS5076PFCR relevant to home-theater receivers, powered speakers, cinema systems, and other multichannel audio equipment.
The device is associated with Texas Instruments' PurePath Digital product family. That positioning identifies it as an audio-focused digital signal-processing device rather than a conventional analog amplifier. Its PWM outputs are intended to provide modulation information for an external amplification stage, so system-level performance also depends on the chosen power stages, output filtering, clocking, and power-supply design.
Typical implementations require the correct digital-audio interface, synchronization signals, configuration data, and supporting power rails. The manufacturer datasheet is the controlling reference for pin assignments, clock requirements, control registers, electrical limits, and recommended application circuits. Designers should preserve the package footprint and timing requirements when creating a new layout or adapting an existing PurePath Digital audio platform.
The main design consideration is that the processor is only one element of the audible output path. Its PWM signals must be connected to suitable amplifier circuitry, and the system must meet the interface and timing constraints stated by Texas Instruments. Blindly substituting a processor with a different channel count, signal format, clock architecture, or package would not preserve the original design intent.
This product page consolidates the verified device description, package details, operating limits, sourcing guidance, and confirmed replacement information. It also identifies where pin-level, register-level, and application-specific decisions require consultation of the manufacturer datasheet rather than assumption.
חלופות תחליף ישיר עבור TAS5076PFCR — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
TAS5076PFCG4
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
TAS5076PFCRG4
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
TAS5076PFCR דירוגים מרביים ומאפיינים חשמליים
| Product Type | Six-channel digital audio PWM processor |
| Manufacturer | Texas Instruments |
| Audio Channels | 6 channels |
| Supply Voltage Range | 3.0 V to 3.6 V |
| Minimum Sample Rate | 32 kHz |
| Maximum Sample Rate | 192 kHz |
| Supported Sample Rates | 32 kHz to 192 kHz |
| Architecture | Digital audio PWM processor |
| Product Family | PurePath Digital |
| Package Type | 80-pin TQFP |
| Package Body Size | 12 mm x 12 mm |
| מספר פינים | 80 pins |
| סוג הרכבה | Surface mount |
מדריך תצורת פינים של TAS5076PFCR 12 mm x 12 mm
תצורת פינים עבור TAS5076PFCR (מארזת 12 mm x 12 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור TAS5076PFCR.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
TAS5076PFCR מתאים עבור 6 יישוםs: Home-Theater Receiver, Powered Speaker Network, Cinema Sound Processor, Multichannel Amplifier, Soundbar Audio Platform, Digital Recording Monitor.
Home-Theater Receiver
The TAS5076PFCR fits a multichannel home-theater receiver because its six-channel digital audio PWM architecture can coordinate the modulation paths required for a typical surround-sound output section. The processor operates from 3.0 V to 3.6 V and supports sample rates from 32 kHz to 192 kHz, allowing the design to accommodate common audio formats and high-resolution sources. It is placed behind the receiver's digital-audio interface and ahead of compatible power-amplifier stages. The six outputs reduce the number of separate digital-audio modulator functions required, but the external amplifiers, reconstruction filters, clocking, and interface timing remain essential to the final signal chain.
מומלץ
Powered Speaker Network
The TAS5076PFCR can serve as the digital modulation controller in a six-channel powered-speaker network. Its six audio channels provide a direct architectural match for a six-driver installation, while the 32 kHz to 192 kHz sample-rate range supports common digital playback rates. The processor accepts digital audio data and generates PWM signals that must be connected to suitable amplifier circuitry and output filtering. Designers should preserve the 80-pin TQFP footprint, honor the 3.0 V to 3.6 V supply range, and validate synchronization at the supported interface rate for every speaker channel.
מומלץ
Cinema Sound Processor
The TAS5076PFCR is applicable in cinema audio equipment requiring six coordinated digital-audio modulation channels. Its 3.0 V to 3.6 V operating range suits compact digital control sections, and its 32 kHz to 192 kHz support accommodates standard and high-resolution source rates. In the signal chain, the device follows the cinema processor's digital-audio interface and precedes the power stages and speaker filters. Integration requires exact implementation of the manufacturer interface timing and configuration procedures. The processor should not be treated as a complete amplifier because external amplification, filtering, thermal design, and channel-specific gain management remain part of the system.
מומלץ
Multichannel Amplifier
The TAS5076PFCR is suitable for the digital control section of a multichannel amplifier because it provides six digital audio PWM channels in one 80-pin package. The device can accept six audio streams from a compatible source and produce the modulation information required by the amplifier circuitry. Its sample-rate support from 32 kHz through 192 kHz permits common-rate digital audio operation, while the 3.0 V to 3.6 V supply range defines the processor's operating region. A successful design must include stable clocking, proper digital grounding, recommended decoupling, and an output-filter and amplifier-stage implementation that meets the audio bandwidth and distortion objectives.
מומלץ
Soundbar Audio Platform
The TAS5076PFCR can form part of a soundbar platform that consolidates several digitally controlled audio paths in a confined PCB area. Its six-channel architecture supports a multichannel front stage, while its 3.0 V to 3.6 V supply range supports integration into a compact digital power section. The soundbar's source interface must deliver compatible digital audio, and the processor's PWM outputs must connect to the selected amplification and filtering stages. Packaging density is improved by using one 80-pin TQFP rather than multiple discrete modulator functions, but layout discipline remains necessary because high-speed digital signals, clocking, and power-return paths all influence implementation quality.
מומלץ
Digital Recording Monitor
The TAS5076PFCR can be used in a digital recording monitor or professional monitoring system that requires multiple synchronized PWM-controlled output channels. Its support for sample rates from 32 kHz to 192 kHz covers common capture, playback, and monitoring resolutions, while six channels allow several monitored outputs to be driven from one digital audio source. The processor is used downstream of the recording or playback interface and upstream of the monitor amplifiers. For predictable operation, the design must use a supported master-clock arrangement, observe all synchronization and setup requirements, and implement the recommended filtering and grounding strategy to prevent digital switching activity from affecting the monitored audio.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור TAS5076PFCR — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | TAS5076PFCG4 | TAS5076PFCRG4 |
|---|---|---|---|
| Package | 80-pin TQFP (12 mm x 12 mm) | 80-pin TQFP (12 mm x 12 mm) | 80-pin TQFP (12 mm x 12 mm) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Type | Six-channel digital audio PWM processor | Six-channel digital audio PWM processor | Six-channel digital audio PWM processor |
| Audio Channels | 6 channels | 6 channels | 6 channels |
| Pin Compatibility | 80-pin TQFP | Complete replacement; terminals and package consistent | Complete replacement; terminals and package consistent |
מבדילים עיקריים
- Six-channel integration in one processor (לעומתTAS5076PFCG4)
- Direct package and terminal compatibility (לעומתTAS5076PFCRG4)
- High-resolution audio support (לעומתTAS5076PFCG4)
הערות תכנון
Place the TAS5076PFCR and its supporting passives in accordance with the manufacturer datasheet and recommended application layout. Keep digital-audio, clock, and PWM routing away from sensitive analog input paths, provide a continuous ground reference, and use short connections between the processor, clock source, and interface components. The 80-pin TQFP requires careful fanout planning so that external amplifiers and digital interface devices can be placed without long peripheral traces.
Design the 3.0 V to 3.6 V supply rail to remain within the operating limits and to meet the decoupling and sequencing requirements in the manufacturer datasheet. Route high-current return currents away from sensitive signal returns and provide local bulk and high-frequency decoupling at the supply pins. Validate the rail during startup because incorrect sequencing or excessive supply noise can prevent reliable interface communication even when nominal voltage is correct.
Follow the datasheet interface timing for clock, data, and synchronization signals. Account for propagation delay and setup/hold requirements at the supported sample rates from 32 kHz to 192 kHz, and use a low-jitter clock source. If the design uses long PCB routes or external interface devices, evaluate them as transmission paths and keep return-current continuity beneath the routed signals.
Do not treat TAS5076 as a conventional analog power amplifier or assume that another six-channel modulator is automatically interchangeable. The replacement must match the 80-pin package, digital-audio protocol, clocking, control behavior, PWM characteristics, supply requirements, and timing. A functional-category match alone is insufficient; compare the manufacturer datasheets and validate the complete audio path before approving a substitution.
מידע על תאימות
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for the exact TAS5076PFCR ordering suffix. Confirm compliance and qualification status with Texas Instruments before production release.