THS1230CPWRG4 - 12-Bit 30MSPS Low-Power ADC | Texas Instruments
MPN: THS1230CPWRG4 ✓ פעילTHS1230CPWRG4 סקירה
An analog-to-digital converter (ADC) is a mixed-signal integrated circuit that converts continuous-time analog voltages into discrete digital codes at a defined sampling rate. ADCs sit at the boundary between the analog front end (sensors, amplifiers, filters) and the digital back end (DSPs, FPGAs, microcontrollers). Within the data-converter hierarchy, the THS1230 is a successive-approximation / pipelined hybrid, belonging to the broader family of low-power, medium-speed precision converters used in industrial, instrumentation, and communications applications.
Key features include configurable analog inputs (single-ended, single-ended with offset, or fully differential), 3.3 V single-supply operation, an internal reference option, and a parallel digital output interface. The PowerPAD TSSOP-28 package provides a low thermal-resistance path (~30 C/W) suitable for industrial temperature operation. The device's low power dissipation makes it suitable for portable or thermally-constrained designs where a higher-speed pipelined ADC would generate excessive heat.
Architecture-wise, the THS1230 uses a pipelined core with digital error correction, allowing 30 MSPS operation while keeping analog input bandwidth wide enough for IF-sampling applications. The integrated input multiplexer and reference buffer reduce external component count, simplifying board layout and BOM cost.
Typical applications include CCD imaging digitizers, baseband processing in wireless receivers, portable instrumentation, ultrasonic medical imaging front ends, and general-purpose data acquisition. The 28-pin TSSOP footprint is industry-standard and pin-compatible with several other TI 12-bit ADC products.
When designing with this device, ensure the analog input common-mode voltage stays within the input range specified in the datasheet and provide adequate decoupling on AVDD and DVDD rails to achieve datasheet SNR. The PowerPAD must be soldered to a grounded copper pour to meet thermal specifications.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.
חלופות תחליף ישיר עבור THS1230CPWRG4 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם THS1230CPWRG4 (אותו גורם צורה וטביעת רגל) — שונים ב Architecture, Operating Temperature, Package, Resolution, Sampling Rate.
THS1230IPWG4
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
THS1230CPWR
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
THS1215IPWG4
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←THS1230CPWRG4 דירוגים מרביים ומאפיינים חשמליים
| רזולוציה | 12 bits |
| קצב דגימה | 30 MSPS |
| Architecture | Pipelined CMOS ADC |
| מתח אספקה | 3.3 V (single supply) |
| Number of Channels | 1 |
| Input Configuration | Single-ended / Single-ended with offset / Differential |
| Digital Interface | Parallel |
| מארז | TSSOP-28 (PW) with PowerPAD |
| טמפרטורת פעולה | 0C to +70C (commercial grade) |
| Power-down Mode | Yes |
| Internal Reference | Yes |
| סוג הרכבה | Surface Mount |
| סטטוס RoHS | Compliant |
תצורת פינים של THS1230CPWRG4
| פין 1 | AVDD — Analog 3.3V supply |
| פין 2 | AGND — Analog ground |
| פין 3 | VIN+ — Analog input positive |
| פין 4 | VIN- — Analog input negative |
| פין 5 | VREF — Reference voltage |
| פין 6 | MODE — Input mode select |
| פין 7 | PD — Power-down input |
| פין 8 | CLK — Clock input |
| פין 9 | DGND — Digital ground |
| פין 10 | DVDD — Digital 3.3V supply |
| פין 11 | D0 — Data output bit 0 (LSB) |
| פין 12 | D1 — Data output bit 1 |
| פין 13 | D2 — Data output bit 2 |
| פין 14 | D3 — Data output bit 3 |
| פין 15 | D4 — Data output bit 4 |
| פין 16 | D5 — Data output bit 5 |
| פין 17 | D6 — Data output bit 6 |
| פין 18 | D7 — Data output bit 7 |
| פין 19 | D8 — Data output bit 8 |
| פין 20 | D9 — Data output bit 9 |
| פין 21 | D10 — Data output bit 10 |
| פין 22 | D11 — Data output bit 11 (MSB) |
| פין 23 | DRDY — Data ready output |
| פין 24 | NC — Not connected |
| פין 25 | NC — Not connected |
| פין 26 | AGND — Analog ground |
| פין 27 | AVDD — Analog 3.3V supply |
| פין 28 | PowerPAD — Thermal pad, connect to AGND |
יישומים טיפוסיים
THS1230CPWRG4 מתאים עבור 6 יישוםs: Ultrasonic Medical Imaging Front End, CCD Imaging Digitizer, Wireless Baseband Receiver, Portable Data Acquisition Module, General-Purpose Industrial Instrumentation, Communications Test Equipment.
Ultrasonic Medical Imaging Front End
The THS1230CPWRG4's 12-bit resolution at 30 MSPS matches the channel bandwidth of ultrasound probe receive paths, while its differential input mode simplifies interface to the transducer pre-amplifier. Low power dissipation on a single 3.3 V supply keeps per-channel heat low in multi-element probes. The integrated input multiplexer reduces external component count, lowering BOM cost for cart-based and portable ultrasound systems where 30 MSPS per channel is sufficient for the required image depth.
מומלץ
CCD Imaging Digitizer
The THS1230CPWRG4 digitizes the analog output of CCD line-scan or area-scan image sensors at pixel clock rates up to 30 MHz, providing 12-bit grayscale depth for machine vision and document scanning. The single-ended input mode accepts direct coupling from the CCD output buffer, and the parallel digital output bus feeds an FPGA or DSP for further image processing. The PowerPAD TSSOP-28 footprint fits compact camera-head boards where thermal management is critical.
מומלץ
Wireless Baseband Receiver
In baseband processing for narrowband wireless receivers, the THS1230CPWRG4 digitizes the I/Q baseband output at sample rates up to 30 MSPS, supporting channel bandwidths common in proprietary ISM-band radios and legacy cellular systems. The differential input mode rejects common-mode noise from the analog front end, and the integrated reference reduces external component count. Low power operation on 3.3 V simplifies compliance with portable device battery-life budgets.
מומלץ
Portable Data Acquisition Module
The THS1230CPWRG4's power-down mode and low supply current make it ideal for handheld or battery-powered data loggers that capture sensor waveforms at sample rates up to 30 MSPS. The single-ended with offset input mode accommodates bipolar sensor signals without external level shifting, reducing board area. The 28-pin TSSOP with PowerPAD provides adequate thermal margin in sealed enclosures where convective cooling is limited.
מומלץ
General-Purpose Industrial Instrumentation
The THS1230CPWRG4 serves as the core digitizer in industrial oscilloscopes, spectrum analyzers, and process-control equipment where 30 MSPS and 12-bit resolution meet measurement requirements. Configurable input modes allow direct connection to single-ended or differential transducer outputs. The parallel output bus streams directly to an FPGA or DSP for FFT, filtering, or display rendering. Commercial temperature grade is sufficient for indoor industrial environments.
מומלץ
Communications Test Equipment
In bench-top communications testers and protocol analyzers, the THS1230CPWRG4 digitizes modulated signals up to 30 MSPS for demodulation and eye-diagram analysis. The parallel digital output enables real-time capture to memory, supporting compliance testing of low-speed serial protocols and baseband signaling. Power-down mode helps meet energy-efficiency requirements in lab equipment that spends significant idle time between measurements.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור THS1230CPWRG4 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | THS1230IPWG4 | THS1230CPWR | THS1215IPWG4 |
|---|---|---|---|---|
| Package | TSSOP-28 (PW) with PowerPAD | TSSOP-28 (PW) with PowerPAD - same | TSSOP-28 (PW) with PowerPAD - same | TSSOP-28 (PW) with PowerPAD - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 12 bits | 12 bits | 12 bits | 12 bits |
| Sampling Rate | 30 MSPS | 30 MSPS | 30 MSPS | 5 MSPS |
| Operating Temperature | 0C to +70C | -40C to +85C | 0C to +70C | -40C to +85C |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Number of Channels | 1 | 1 | 1 | 1 |
| Power-down Mode | Yes | Yes | Yes | Yes |
מבדילים עיקריים
- Industrial-grade drop-in replacement available (לעומתTHS1230IPWG4)
- Higher sample rate than THS1215 family (לעומתTHS1215IPWG4)
- Compact TSSOP-28 with PowerPAD (לעומתTHS1230CDWR (SOIC-28))
הערות תכנון
Separate analog and digital ground planes are critical for the THS1230CPWRG4 to achieve datasheet SNR. Route AGND and DGND independently to a single star-point connection near the PowerPAD. Place 0.1 uF ceramic decoupling capacitors as close as possible to each AVDD and DVDD pin, with a 10 uF bulk tantalum or ceramic on each supply rail. Keep analog input traces short and shielded by surrounding ground pours.
The PowerPAD on the 28-pin TSSOP must be soldered to a grounded copper pour of at least 1 square inch to meet the datasheet thermal resistance of approximately 30 C/W. Without proper PowerPAD soldering, junction temperature can exceed rated limits during continuous 30 MSPS operation. Use multiple thermal vias under the pad to conduct heat into inner PCB ground planes.
Drive the CLK input with a low-jitter clock source; aperture jitter directly degrades SNR at high input frequencies. The datasheet recommends keeping clock jitter below 5 ps RMS for IF-sampling applications. Use a clock buffer or dedicated oscillator rather than distributing a digital clock through a noisy FPGA pin. Maintain 50 ohm controlled impedance on the CLK trace if routing is longer than a few millimeters.
Do not leave the MODE pin floating; tie it to a defined logic level via a pull-up or pull-down resistor to select the desired input configuration reliably. Failing to drive MODE properly can cause the input multiplexer to enter an undefined state. Similarly, the PD pin must be tied to logic low if power-down is not used, otherwise the device will not sample on power-up.
Estimated: At 30 MSPS and 3.3 V supply, typical supply current is in the 30-50 mA range, yielding approximately 100-170 mW total power. Add a 10% margin for design verification. The integrated power-down mode reduces current to a few mA when idle, supporting battery-powered applications where the ADC is duty-cycled to capture short bursts of sensor data.
מידע על תאימות
RoHS compliant Pb-free (G4 suffix) per Texas Instruments product marking. Commercial temperature grade; not AEC-Q100 qualified.
