Texas Instruments

THS5641IPW - 8-Bit 100-MSPS CommsDAC | Texas Instruments

MPN: THS5641IPW ✓ פעיל
2 mA to 20 mA Id 28-pin TSSOP Package 50 dB Speed
כמות הזמנה מינימלית: 1 |

THS5641IPW סקירה

The Texas Instruments THS5641IPW is an 8-bit, 100-MSPS digital-to-analog converter optimized for video applications and high-speed digital data transmission. It uses differential current outputs scalable between 2 mA and 20 mA and is packaged in a 28-pin TSSOP. The converter provides a 50 dB SINAD at 5 MHz, 0.25 LSB integral nonlinearity, 0.25 LSB differential nonlinearity, and 1 ns setup and hold time.

A DAC is a mixed-signal converter that translates parallel digital code into a proportional analog voltage or current. The THS5641 belongs to the CommsDAC family of high-speed, low-power CMOS converters. That family hierarchy includes the DAC function, data converter, mixed-signal IC, and semiconductor categories. Differential current output is especially useful in communication systems because it can improve rejection of common-mode voltage and noise when paired with suitable external circuitry.

The primary features of the THS5641IPW are its 8-bit resolution, 100 MSPS update rate, scalable 2 mA to 20 mA differential outputs, and 28-pin TSSOP construction. Its 50 dB SINAD figure at 5 MHz indicates adequate dynamic performance for video and communication waveform generation. The 0.25 LSB INL and DNL values characterize the converter's static linearity, while the 1 ns setup and hold timing supports high-speed digital input capture.

Technically, the THS5641 uses a parallel digital interface and a current-steering architecture with differential outputs. The converter's output current can be scaled to accommodate downstream circuitry and board-level signal levels. Because this is a current-output DAC, the external output network is an important part of the complete signal path. Correct termination, reference selection, board layout, and control timing determine the practical dynamic range and output accuracy.

Typical applications include digital video waveform generation, wired and wireless communication systems, test and measurement signal sources, and embedded equipment that needs to convert fast parallel data into an analog differential signal. In each case, the 100-MSPS update rate supports rapidly changing waveforms, while the compact 28-pin TSSOP simplifies board integration compared with larger high-speed converter packages.

Designers should evaluate output compliance, reference-decoupling requirements, digital-interface timing, and PCB routing before finalizing a design. The differential output network must maintain the intended impedance across the operating frequency range, and high-speed clock and data traces should be routed with controlled impedance and minimized crosstalk. Use the manufacturer pin-description table and reference circuit when assigning tracks and selecting external components.

This product page combines the manufacturer-family operating characteristics, package information, application guidance, comparison criteria, and practical layout considerations into an engineering-focused selection resource for the THS5641IPW.

חלופות תחליף ישיר עבור THS5641IPW — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

THS5641AIPW

✅ Drop-In
📦 28-pin TSSOP
Same 8-bit resolution and 100-MSPS update rate, with documented improved AC and DC performance; resolution difference is 0%

📋 חלופה להתייחסות (לא בקטלוג)

THS5640IPW

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 28-pin TSSOP
Pin-compatible CommsDAC interface with 14-bit resolution, a 6-bit or 75% resolution increase over the 8-bit target

📋 חלופה להתייחסות (לא בקטלוג)

THS5642IPW

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 28-pin TSSOP
Pin-compatible CommsDAC interface with 12-bit resolution, a 4-bit or 50% resolution increase over the 8-bit target

📋 חלופה להתייחסות (לא בקטלוג)

THS5643IPW

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 28-pin TSSOP
Pin-compatible CommsDAC interface with 10-bit resolution, a 2-bit or 25% resolution increase over the 8-bit target

📋 חלופה להתייחסות (לא בקטלוג)

THS5640AIPW

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 28-pin TSSOP
Pin-compatible A-series CommsDAC with 14-bit resolution, a 6-bit or 75% resolution increase over the 8-bit target

📋 חלופה להתייחסות (לא בקטלוג)

THS5642AIPW

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 28-pin TSSOP
Pin-compatible A-series CommsDAC with 12-bit resolution, a 4-bit or 50% resolution increase over the 8-bit target

📋 חלופה להתייחסות (לא בקטלוג)

THS5641IPW דירוגים מרביים ומאפיינים חשמליים

רזולוציה 8 bits
Update Rate 100 MSPS
Converter Type Digital-to-analog converter
Architecture CommsDAC differential current-output DAC
סוג פלט Differential current output
Output Current Range 2 mA to 20 mA
SINAD at 5 MHz 50 dB
Integral Nonlinearity 0.25 LSB
Differential Nonlinearity 0.25 LSB
Setup Time 1 ns
Hold Time 1 ns
מארז 28-pin TSSOP
Package Terminal Count 28 terminals
Package Form Rectangular gull-wing TSSOP
סוג הרכבה Surface mount
Temperature Grade Industrial

מדריך תצורת פינים של THS5641IPW rectangular gull-wing tssop

תצורת פינים עבור THS5641IPW (מארזת rectangular gull-wing tssop). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת rectangular gull-wing tssop עבור THS5641IPW

אין נתוני פריסת פינים מפורטים עבור THS5641IPW.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

THS5641IPW מתאים עבור 6 יישוםs: Digital Video Waveform Generation, Wired Communication Signal Generation, Wireless Baseband Signal Synthesis, Test and Measurement Signal Sources, Industrial Imaging and Video Control, Digital-to-Analog Data Acquisition Front Ends.

📺

Digital Video Waveform Generation

The THS5641IPW fits digital video test-signal generation because its 8-bit converter resolution and 100-MSPS update rate provide sufficient throughput for rapidly changing parallel data patterns. The manufacturer identifies video as a primary application for this CommsDAC family. Differential current outputs spanning 2 mA to 20 mA can feed a suitable output network, while 0.25-LSB INL and DNL characterize code-to-current accuracy. Engineers should still validate video timing, output compliance, reconstruction filtering, and analog bandwidth in the complete test-equipment signal chain.

🌐

Wired Communication Signal Generation

The THS5641IPW is suitable for wired communication test equipment that must convert parallel digital data into analog differential signals at up to 100 MSPS. Its differential current-output architecture supports matched signal paths, while the 50-dB SINAD at 5 MHz provides a defined dynamic-performance target for waveform quality. The converter can be placed between a digital pattern source and an external reconstruction or output-conditioning network. Interface timing, reference stability, impedance matching, and channel bandwidth should be verified together for each communication standard.

🌐

Wireless Baseband Signal Synthesis

The THS5641IPW can support wireless baseband waveform synthesis where an 8-bit parallel interface and a 100-MSPS update rate match the required symbol or sample throughput. Its differential current output provides a flexible starting point for common-mode-rejected analog drive stages, and the 2 mA to 20 mA scaling range permits output-network optimization. Designers should confirm that the 8-bit quantization level and 50-dB SINAD meet the receiver's test requirements. RF paths also require separate carrier-generation and modulation stages beyond this DAC.

⚡

Test and Measurement Signal Sources

The THS5641IPW is appropriate for compact bench-top or embedded test instruments that generate fast analog waveforms from digital code patterns. Its 28-pin TSSOP package preserves board space, while 100-MSPS operation covers many communication, video, and component-test waveforms. The manufacturer-reported 0.25-LSB INL and DNL provide useful calibration baselines, and the differential outputs can drive matched termination networks. For precision amplitude accuracy, calibrate the complete converter, reference, output network, and measurement path rather than relying on converter linearity alone.

📺

Industrial Imaging and Video Control

The THS5641IPW can be used as a signal-generating element in industrial imaging or video-control equipment that converts stored or computed digital patterns into analog drive signals. The 8-bit resolution is appropriate for many non-critical display and modulation waveforms, and the 100-MSPS rate supports fast transitions. Its differential output can simplify balanced routing when paired with suitable termination. System-level image quality will also depend on the video processing stage, reconstruction filter, amplifier bandwidth, and grounding, so validate those blocks with the converter in its final operating configuration.

🖥️

Digital-to-Analog Data Acquisition Front Ends

The THS5641IPW is useful in specialized data-acquisition front ends that need to reproduce an analog signal from high-rate digital samples. Its parallel input supports deterministic updates up to 100 MSPS, while differential current outputs can feed instrumentation amplifiers or balanced receiver stages. The converter's 50-dB SINAD at 5 MHz and sub-LSB DNL provide useful design targets, although system noise and bandwidth depend on external components. Keep digital, reference, and analog return paths separated, and verify settling behavior for the intended output frequency.

סיכום מוצרים מומלצים

THS5641AIPW Same-family 8-bit 100-MSPS converter with improved performance בשימוש ב-: Digital Video Waveform Generation, Wired Communication Signal Generation, Wireless Baseband Signal Synthesis, Test and Measurement Signal Sources, Industrial Imaging and Video Control, Digital-to-Analog Data Acquisition Front Ends THS5642IPW Pin-compatible higher-resolution CommsDAC option בשימוש ב-: Digital Video Waveform Generation, Wireless Baseband Signal Synthesis, Digital-to-Analog Data Acquisition Front Ends THS5643IPW Pin-compatible 10-bit CommsDAC option בשימוש ב-: Wired Communication Signal Generation, Industrial Imaging and Video Control THS5640IPW Higher-resolution pin-compatible CommsDAC בשימוש ב-: Test and Measurement Signal Sources
What is the THS5641IPW?
The THS5641IPW is an 8-bit, 100-MSPS CommsDAC digital-to-analog converter from Texas Instruments. It provides scalable differential current outputs from 2 mA to 20 mA in a 28-pin TSSOP package. According to the manufacturer datasheet information, the device is optimized for video applications and digital data transmission in wired and wireless communication systems.
What are the key specifications of THS5641IPW?
The THS5641IPW provides 8-bit resolution, a 100-MSPS update rate, and differential current outputs adjustable from 2 mA to 20 mA. Its stated dynamic performance is 50 dB SINAD at 5 MHz, with 0.25-LSB INL and 0.25-LSB DNL. The manufacturer datasheet information also specifies 1 ns setup and hold timing for the high-speed parallel interface.
Where to download the THS5641IPW datasheet PDF?
The THS5641IPW datasheet can be accessed through the linked Texas Instruments part documentation and the THS5641 family datasheet listing. The manufacturer datasheet is the authoritative source for the complete pin table, recommended application circuit, electrical characteristics, package drawings, and timing diagrams. Use the pin-description table when assigning PCB tracks.
Where can I find the THS5641IPW pinout?
The THS5641IPW pinout is documented in the manufacturer datasheet's pin-configuration section. This device uses a 28-pin TSSOP package, and the datasheet should be used to verify signal names, supply connections, reference pins, digital data inputs, clock inputs, and analog output connections before layout. Use the package drawing together with the pin-description table.
Is THS5641IPW suitable for video signal generation?
Yes, the THS5641IPW is suitable for video waveform generation because the manufacturer identifies it as an 8-bit converter optimized for video applications. Its 100-MSPS update rate supports fast-changing digital patterns, while the 50-dB SINAD and 0.25-LSB linearity figures characterize its signal quality. The complete output network and video timing requirements still need validation for a specific system.
What can replace the THS5641IPW?
The THS5641AIPW is the closest identified same-brand, same-family replacement because it retains 8-bit resolution, a 100-MSPS update rate, the same 28-pin TSSOP interface, and the manufacturer-stated CommsDAC pin-compatible family architecture. Confirm supply-voltage limits, output-current range, reference circuitry, and timing against the complete datasheet before production substitution.
Is THS5641IPW the same as THS5641AIPW?
No, THS5641IPW and THS5641AIPW are related but not identical catalog entries. THS5641AIPW retains 8-bit resolution and a 100-MSPS update rate and offers improved AC and DC performance according to the manufacturer product-page description. Both use the 28-pin CommsDAC family architecture, so they are candidate drop-in options when all electrical limits and external circuitry match.
THS5641IPW vs THS5641AIPW: which is better for a new design?
Choose THS5641AIPW for a new design when its documented performance improvements are useful, because it retains the 100-MSPS rate and 8-bit resolution while offering superior AC and DC performance. Retain THS5641IPW when its established electrical characteristics match an existing design and no additional performance is required. In both cases, verify the complete input, output, reference, and supply specifications.
When should I choose THS5641IPW over a higher-resolution CommsDAC?
Choose THS5641IPW when an 8-bit conversion resolution and 100-MSPS update rate satisfy the required video or communications bandwidth and the existing 0.25-LSB INL and DNL performance is acceptable. Select a higher-resolution family member when quantization steps must be finer or when the system cannot tolerate the lower bit depth. Resolution alone should not determine the choice; output architecture and timing also matter.
What is the best Texas Instruments equivalent for THS5641IPW?
THS5641AIPW is the best identified Texas Instruments equivalent because it preserves 8-bit resolution, supports 100-MSPS operation, uses the 28-pin TSSOP package, and belongs to the pin-compatible CommsDAC family. The manufacturer product page states that the THS5641A offers improved AC and DC performance. Confirm electrical compatibility and production availability before approving the substitution.
Where can I buy THS5641IPW online?
Use the Request a Quote form on this page to ask about THS5641IPW availability, order quantity, and delivery timing. The form provides the appropriate XAIPART purchasing channel without relying on a static price or stock claim. Include the target package suffix, quantity, and any required production qualification information with the request.
What is the price of THS5641IPW?
Current THS5641IPW pricing is available through the Request a Quote form on this page. The quote workflow reflects current commercial conditions and quantity requirements more reliably than a static listing. Submit the required quantity, target date, and packaging preference so the commercial team can return an appropriate response.
What is the lead time and stock status for THS5641IPW?
Request current THS5641IPW stock and lead-time information through the Request a Quote form on this page. Availability can change with order quantity, date code, packaging, and supply conditions, so it should be confirmed for each production program. Include your required delivery date and scheduled build quantity in the request.
How should the THS5641IPW output network be designed?
Treat the THS5641IPW differential outputs as a matched current-output signal path and use the manufacturer reference circuit to select termination and conversion components. The supported output-current range is 2 mA to 20 mA, so downstream impedance and compliance must remain within the electrical limits. Validate DC accuracy, bandwidth, impedance matching, and output voltage over the full intended frequency range.
Does THS5641IPW require a heatsink?
The available family information confirms a 100-MSPS CMOS DAC in a 28-pin TSSOP, but it does not provide the target device's complete thermal and supply-current ratings. A heatsink requirement cannot therefore be determined from the stated information alone. Use the manufacturer datasheet's power-dissipation and junction-temperature limits with the actual supply voltage, output current, load, and ambient temperature.

נתוני עזר הנדסיים עבור THS5641IPW — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose THS5641IPW when the application specifically needs an 8-bit, 100-MSPS converter with scalable differential current outputs from 2 mA to 20 mA and the specified 0.25-LSB INL and DNL are adequate. Its 28-pin TSSOP and CommsDAC interface suit compact video, communication, and test-signal designs. Choose THS5641AIPW for a new design when the manufacturer's documented AC and DC improvements justify the related part; it preserves resolution, update rate, package, and family pin compatibility. Choose THS5643IPW, THS5642IPW, or THS5640IPW when finer quantization is valuable and the extra digital data width is acceptable. Before substitution, confirm supply voltage, reference requirements, output compliance, electrical limits, timing, and the complete manufacturer application circuit.

השוואה עם חלופות

פרמטר מוצר זה THS5641AIPW THS5640IPW THS5642IPW THS5643IPW
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP
Resolution 8 bits 8 bits 14 bits 12 bits 10 bits
Output Architecture Differential current output Differential current output Differential current output Differential current output Differential current output

מבדילים עיקריים

  • Lower-resolution member of the pin-compatible CommsDAC family (לעומתTHS5642IPW)
  • Direct same-resolution family alternative with improved performance (לעומתTHS5641AIPW)
  • Lower update-rate requirement for video and communications (לעומתTHS5641IPW)
  • Defined static linearity for code-to-current conversion (לעומתTHS5641AIPW)

הערות תכנון

Route the parallel digital input and clock signals as controlled-impedance, short traces, and keep the converter's digital return path separated from the reference and analog-output return paths. Place the reference and output-network components close to their associated pins. The 1 ns setup and hold figures make clock skew and data timing as important as DC routing, so verify timing at the actual connector, FPGA, or ASIC rather than only at the source device.

Do not treat the 2 mA to 20 mA differential current outputs as voltage outputs or connect them directly to an unrestricted load. Use the manufacturer reference circuit to establish compliant termination, conversion impedance, and output-voltage limits. A mechanically symmetrical output network is important because differential amplitude and common-mode errors can degrade evenness and channel matching.

Follow the manufacturer requirements for analog and digital supply decoupling, including the recommended capacitor values and placement. Keep the reference node quiet and decouple it locally because reference disturbance can appear directly as output-current error. Confirm supply sequencing, allowable voltage ranges, and power-up behavior against the target-device datasheet before enabling the converter.

Evaluate the complete output path for bandwidth, return loss, impedance matching, and isolation from digital switching activity. The stated 50-dB SINAD at 5 MHz is a converter-level figure and does not include degradation caused by an unsuitable reconstruction filter or unbalanced termination. Measure the assembled waveform at the system output and include PCB parasitics in the simulation when possible.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement appears in the manufacturer or distributor information. The industrial temperature-grade description does not by itself establish AEC-Q100 qualification.

הנתונים אומתו בתאריך: 2026-11-20 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

THS5641IPW datasheet THS5641IPW datasheet pdf THS5641IPW pinout THS5641IPW specifications THS5641IPW equivalent THS5641IPW replacement THS5641IPW cross reference THS5641IPW vs THS5641AIPW THS5641IPW price THS5641IPW stock Texas Instruments THS5641IPW THS5641 8-bit 100 MSPS DAC THS5641 28-pin TSSOP pinout THS5641 video DAC application

רכיבים ומונחים קשורים

Texas Instruments THS5641IPW THS5641AIPW THS5640IPW THS5642IPW THS5643IPW THS5640AIPW THS5642AIPW digital-to-analog converter DAC CommsDAC mixed-signal IC high-speed CMOS converter differential current output parallel digital interface 100 MSPS 8-bit resolution SINAD integral nonlinearity differential nonlinearity TSSOP-28 TSSOP family surface mount video signal generation wired and wireless communications
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר