Texas Instruments

TMS320BC53PQ57 - 57MHz Fixed-Point DSP | Texas Instruments

MPN: TMS320BC53PQ57 ✗ סוף ייצור
5 V Vdss 132-pin BQFP Package 57 MHz Speed 8.1 kB Memory
כמות הזמנה מינימלית: 1 |

TMS320BC53PQ57 סקירה

The Texas Instruments TMS320BC53PQ57 is a fixed-point digital signal processor operating at 57 MHz with a 16-bit CPU and 28.5 MIPS performance, housed in a 132-pin BQFP package measuring 24.13 mm by 24.13 mm. It belongs to the TMS320C5x family of programmable digital signal processors used for real-time filtering, signal analysis, control, and communications.

A digital signal processor is a semiconductor that executes arithmetic operations on sampled signals in real time. Unlike a general-purpose microprocessor, a DSP is optimized for multiply-accumulate operations, parallel data movement, and deterministic control loops. The DSP hierarchy places this device among fixed-point processors, where software represents numerical values using integer scaling and fractional-point conventions.

The TMS320BC53PQ57 combines a 16-bit TMS320C5x CPU, 57 MHz clocking, and 28.5 MIPS throughput. Its 132-pin BQFP package provides a substantial lead count for external memory, parallel interfaces, control signals, and peripheral connectivity. The product listing identifies 8.1 kB of internal memory, a 5 V operating condition, and a commercial temperature range from 0°C to 70°C.

The TMS320C5x execution architecture is designed for high-throughput digital signal-processing workloads. Its fixed-point CPU is suited to algorithms whose fractional precision can be maintained through integer representation and careful scaling. This makes the device applicable to audio processing, communications, industrial measurement, embedded control, and signal-generation systems where predictable real-time execution is important.

Typical uses include digital filtering, modulation, spectral analysis, waveform generation, speech processing, and closed-loop control. Designers can pair the processor with external memory and interface hardware when an application exceeds the internal resource budget or requires wider buses, specialized peripherals, or additional I/O.

Board design should account for the large BQFP footprint, 132-pin land pattern, supply-decoupling requirements, clock integrity, and high-density routing around the package. Because this legacy processor has a complex pin assignment and extensive peripheral connectivity, use the manufacturer pin-description table and reference design to verify every signal before layout release.

This product record combines the exact manufacturer identifiers, package information, clock and throughput characteristics, comparison candidates, and practical integration guidance needed to evaluate a 57 MHz fixed-point DSP implementation.

חלופות תחליף ישיר עבור TMS320BC53PQ57 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם TMS320BC53PQ57 (אותו גורם צורה וטביעת רגל) — שונים ב Instruction Throughput, Package Type, Package Body Size, Product Type, Clock Frequency.

Texas Instruments
Package Type: 132-pin bumpered BQFP
השווה עם TMS320BC53PQ57 →
Texas Instruments
Instruction Throughput: 30 million instructions per second
Product Type: 32-bit floating-point digital signal processor
השווה עם TMS320BC53PQ57 →
Texas Instruments
Instruction Throughput: 30 MIPS
Package Type: 144-QFP
Package Body Size: 28 mm x 28 mm
השווה עם TMS320BC53PQ57 →

TMS320BC53PQA57

✅ Drop-In
📦 132-pin BQFP
Same TMS320BC53 family and 132-pin BQFP format; ordering-code grade details differ, while the 57 MHz clock designation is unchanged.

📋 חלופה להתייחסות (לא בקטלוג)

TMS320C31PQL60

✅ Drop-In
Texas Instruments
📦 132-pin BQFP
32-bit floating-point digital signal processor · 60 MHz · 32 bit · 33 ns · 330 MOPS · 60 MFLOPS · 30 MIPS · 24 bit

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

TMS320C32PCM40

✅ Drop-In
Texas Instruments
📦 132-pin BQFP
32-bit floating-point digital signal processor · 40 MHz · 32 bit · 33 ns high-performance cycle; 40 ns standard cycle · 330 million operations per second · 60 million floating-point operations per second · 30 million instructions per second · TMS320C3x floating-point DSP

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

TMS320C32PCM60

✅ Drop-In
Texas Instruments
📦 132-pin BQFP
32-bit floating-point digital signal processor · 60 MHz · 30 MIPS · 60 MFLOPS · 330 MOPS · 33 ns · 40 ns · 32 bit

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

TMS320BC51PQA80

✅ Drop-In
📦 132-pin BQFP
The comparison record identifies an 80 MHz clock, approximately 40.4% above the target’s 57 MHz, in the same 132-pin BQFP outline.

📋 חלופה להתייחסות (לא בקטלוג)

TMS320BC53PQ57 מפרטים

Product Type Fixed-point digital signal processor
CPU Architecture 16-bit TMS320C5x
Clock Frequency 57 MHz
Instruction Throughput 28.5 MIPS
Data Word Length 16 bit
Internal Memory 8.1 kB
מתח אספקה פעיל 5 V
טווח טמפרטורת פעולה 0°C to 70°C
Package Type 132-pin BQFP
Package Body Size 24.13 mm x 24.13 mm
סגנון הרכבה Lead surface mount
Instruction Execution Time at 5 V 25 ns to 35 ns single cycle
Instruction Execution Time at 3 V 25 ns to 40 ns single cycle
Multiplier 16-bit x 16-bit single-cycle multiply-accumulate

מדריך תצורת פינים של TMS320BC53PQ57 24.13 mm x 24.13 mm

תצורת פינים עבור TMS320BC53PQ57 (מארזת 24.13 mm x 24.13 mm). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 24.13 mm x 24.13 mm עבור TMS320BC53PQ57

אין נתוני פריסת פינים מפורטים עבור TMS320BC53PQ57.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

TMS320BC53PQ57 מתאים עבור 6 יישוםs: Digital Audio Filtering, Industrial Control Systems, Communications Signal Processing, Measurement and Waveform Generation, Speech and Audio Codec Processing, Embedded Sensor Processing.

🎧

Digital Audio Filtering

The TMS320BC53PQ57 fits digital audio filtering because its 16-bit TMS320C5x CPU performs single-cycle 16-bit by 16-bit multiply-accumulate operations at 57 MHz. The architecture can execute FIR and IIR filtering, equalization, mixing, and interpolation algorithms in deterministic real-time cycles. Its 28.5 MIPS throughput provides the instruction budget required by multichannel or higher-order processing, although the designer must establish fixed-point scaling carefully to preserve signal-to-noise performance. The 132-pin BQFP interface supports the memory and peripheral resources expected by a standalone audio-processing subsystem.

🏭

Industrial Control Systems

The TMS320BC53PQ57 is appropriate for deterministic industrial control loops that require rapid sampling, filtering, and algorithmic decision-making. Its 57 MHz clock and 28.5 MIPS throughput allow control equations, sensor conditioning, and digital compensation to execute in real time. The 16-bit fixed-point representation is useful for cost-conscious control implementations because it provides an efficient arithmetic path when scaling is managed correctly. Designers should reserve resources for real-time interrupts, external data acquisition, actuator interfaces, and watchdogs while confirming that the commercial 0°C to 70°C range covers the enclosure environment.

🌐

Communications Signal Processing

The TMS320BC53PQ57 can support communications signal-processing tasks such as modulation, correlation, spectral analysis, filtering, and bit recovery. Its single-cycle multiply-accumulate path is a strong match for algorithms dominated by repeated filter and convolution operations, while 28.5 MIPS provides a defined processing budget for a 57 MHz clock. Fixed-point implementation can reduce hardware complexity compared with floating-point designs, but gain, overflow, quantization, and scaling must be checked for each signal path. The large BQFP package also allows the design to incorporate substantial external memory and parallel interface resources.

📺

Measurement and Waveform Generation

The TMS320BC53PQ57 fits measurement instruments that require real-time signal calculation or precise waveform generation. At 57 MHz and 28.5 MIPS, it can combine sample conditioning, digital filtering, interpolation, phase correction, and control logic in a single programmable processor. The 16-bit architecture offers a practical balance between arithmetic throughput and implementation complexity, although generated-signal accuracy depends on the fixed-point format, DAC interface, reference clock, and output reconstruction filters. The processor’s extensive pin count should be planned for external memory, buffering, synchronization, and test instrumentation.

🧩

Speech and Audio Codec Processing

The TMS320BC53PQ57 is suitable for embedded speech or codec-related processing when a fixed-point engine and real-time throughput are priorities. Its 16-bit arithmetic width aligns naturally with many 16-bit sample formats, and single-cycle multiply-accumulate operations support filters and transform-related kernels efficiently. The implementation must still account for algorithm-specific state storage, which may exceed the device’s 8.1 kB internal memory and require external memory. Clocking, serial interfaces, DMA behavior, interrupt latency, and codec timing should be evaluated together to avoid limiting throughput with peripheral transfers.

📡

Embedded Sensor Processing

The TMS320BC53PQ57 can act as a sensor-processing hub for vibration, position, condition-monitoring, or acquisition systems where raw samples must be filtered before transmission or storage. Its 28.5 MIPS throughput supports concurrent acquisition, scaling, filtering, feature extraction, and control functions, while the single-cycle multiplier accelerates common DSP kernels. Fixed-point arithmetic can lower implementation cost, although sensor noise, coefficient precision, overflow margins, and anti-aliasing requirements need careful treatment. The BQFP package offers extensive connectivity for external memory and sensors but demands a dense, carefully routed board layout.

סיכום מוצרים מומלצים

TMS320BC53PQA57 Same-family fixed-point DSP candidate בשימוש ב-: Digital Audio Filtering, Communications Signal Processing, Speech and Audio Codec Processing TMS320C32PCM40 Texas Instruments בשימוש ב-: Digital Audio Filtering, Measurement and Waveform Generation TMS320C32PCM60 Texas Instruments בשימוש ב-: Industrial Control Systems, Measurement and Waveform Generation, Embedded Sensor Processing TMS320C31PQL60 Texas Instruments בשימוש ב-: Industrial Control Systems, Speech and Audio Codec Processing TMS320BC51PQA80 Higher-clock BQFP DSP comparison בשימוש ב-: Communications Signal Processing, Embedded Sensor Processing
What is the TMS320BC53PQ57?
The TMS320BC53PQ57 is a 16-bit fixed-point digital signal processor from Texas Instruments, operating at 57 MHz and delivering 28.5 MIPS of throughput. It uses a 132-pin BQFP package measuring 24.13 mm by 24.13 mm. According to the TMS320BC53 datasheet description, its TMS320C5x CPU supports single-cycle instruction execution and single-cycle 16-bit multiply-accumulate operations, making it suitable for real-time filtering, communications, control, and signal-processing systems.
What are the key specifications of TMS320BC53PQ57 that engineers should know?
The main TMS320BC53PQ57 specifications are a 57 MHz operating frequency, 16-bit fixed-point CPU, 28.5 MIPS throughput, 8.1 kB of internal memory, and a 132-pin BQFP package. According to the manufacturer datasheet description, the processor can execute an instruction in as little as 25 ns at 5 V and supports single-cycle 16-bit by 16-bit multiplication. The commercial operating-temperature range is 0°C to 70°C, so the device is intended for designs whose environmental requirements stay within that range.
Where can I download the TMS320BC53PQ57 datasheet PDF?
The TMS320BC53PQ57 datasheet can be reached through the Texas Instruments product documentation or the linked datasheet index. The indexed PDF describes the TMS320BC53 architecture, electrical characteristics, pin assignments, and peripheral functions. Use the manufacturer pin-description table when assigning the 132 BQFP connections because the package contains a large number of control, memory, interface, clock, and power signals that cannot be safely inferred from the commercial description alone.
Where can I find the TMS320BC53PQ57 pinout?
The TMS320BC53PQ57 pinout is in the pin-description and terminal-reference sections of the TMS320BC53 manufacturer datasheet. This processor uses a 132-pin BQFP package, so its connections include a broad mix of address, data, control, serial-interface, clock, and power functions. Before routing a PCB, assign every pin by its exact datasheet name and verify alternate-function multiplexing rather than relying on a generic 132-pin schematic.
How fast is the TMS320BC53PQ57?
The TMS320BC53PQ57 operates at 57 MHz and is listed at 28.5 MIPS. According to the TMS320BC53 datasheet description, its TMS320C5x CPU supports 25 ns to 35 ns single-cycle instruction execution at 5 V and 25 ns to 40 ns at 3 V. Actual application throughput also depends on memory access, peripheral handshakes, data movement, and the instruction mix selected by the compiled DSP algorithm.
What is the TMS320BC53PQ57 package and pin count?
The TMS320BC53PQ57 is packaged in a 132-pin BQFP with a body size of 24.13 mm by 24.13 mm. It is a leaded surface-mount package rather than a leadless chip carrier. The BQFP form factor provides 132 physical connections but requires careful fanout and escape routing around all four sides, so land pattern selection should be based on the manufacturer package drawing and the PCB assembly capability of the intended manufacturer.
Where can I buy TMS320BC53PQ57 and what is its price?
The TMS320BC53PQ57 can be requested for quotation through the Request a Quote form on this page. The form lets the buyer provide quantity, target delivery location, and required sourcing conditions so current commercial terms can be reviewed against the exact 132-pin BQFP ordering code. No fixed price should be assumed because legacy DSP inventory, date codes, and quantity breaks can change without notice.
What is the lead time for TMS320BC53PQ57?
The current lead time for TMS320BC53PQ57 should be confirmed through the Request a Quote form on this page. Lead time can vary with requested quantity, assembly and test condition, date-code requirement, and the availability of this legacy 132-pin BQFP device. Provide the production quantity and target delivery date with the request, and do not schedule the PCB release around an unconfirmed delivery estimate.
Is TMS320BC53PQ57 in stock?
Current stock for TMS320BC53PQ57 should be checked by submitting the Request a Quote form on this page. Stock status must be treated as quantity- and condition-specific for this legacy processor rather than inferred from general marketplace listings. Include the required order quantity, date-code constraints, and whether unbroken, factory-new packing is mandatory when requesting availability.
TMS320BC53PQ57 vs TMS320C31PQL60 - which is better?
The TMS320BC53PQ57 is the better fit when the design specifically targets the TMS320BC53 fixed-point architecture at 57 MHz and 28.5 MIPS. The cross-reference record identifies TMS320C31PQL60 as a 132-pin BQFP device with a 32-bit data bus and 60 MHz operation, versus the target’s 16-bit data width and 57 MHz clock. Because the bus architecture and software target differ, the TMS320C31PQL60 should not be treated as a transparent software-compatible replacement without a complete port.
TMS320BC53PQ57 vs TMS320BC51PQA80 - what is the difference?
The principal visible difference is the processor model and clock designation: the target is TMS320BC53PQ57 at 57 MHz, while TMS320BC51PQA80 is identified in the comparison record as an 80 MHz device in the same 132-pin BQFP format. The 80 MHz designation is approximately 40% higher than 57 MHz. Despite the shared package outline, CPU resources, peripheral complements, timing, and software support must be compared before treating the BC51 as a drop-in replacement.
What can replace TMS320BC53PQ57?
The closest package-level candidates to evaluate for TMS320BC53PQ57 are the Texas Instruments TMS320BC53PQA57, TMS320C31PQL60, TMS320C32PCM40, and TMS320C32PCM60. None should be treated as a universal substitute solely because it appears in a comparison database. The replacement process must confirm pin-by-pin electrical compatibility, peripheral availability, memory-map behavior, clock limits, software instruction support, and package drawing before a design is changed.
Is TMS320BC53PQA57 a drop-in replacement for TMS320BC53PQ57?
TMS320BC53PQA57 is the strongest same-family replacement candidate for TMS320BC53PQ57 because both identifiers belong to the TMS320BC53 family and use the 132-pin BQFP format shown in the comparison record. The ordering-code difference still requires careful review of temperature grade, device revision, and ordering details. Confirm every pin and electrical limit against the manufacturer datasheet, and validate existing DSP software before approving a substitution.
When should I choose TMS320BC53PQ57 over a newer DSP?
Choose TMS320BC53PQ57 when maintaining an established TMS320BC53 design matters more than obtaining a newer processor architecture or smaller package. Its 57 MHz clock, 16-bit fixed-point CPU, 28.5 MIPS throughput, and 132-pin BQFP interface preserve a specific hardware and software target. A newer DSP is preferable when package area, power consumption, performance per watt, tooling, or long-term availability is more important than preserving the existing platform.
Is TMS320BC53PQ57 suitable for audio and industrial signal processing?
TMS320BC53PQ57 is suitable for many real-time signal-processing designs because its 16-bit TMS320C5x CPU performs single-cycle 16-bit by 16-bit multiply-accumulate operations at 57 MHz. The fixed-point format is well suited to filters, modulation, waveform generation, and closed-loop control after appropriate integer scaling. For audio and industrial systems, verify signal-to-noise requirements, external memory behavior, peripheral availability, timing, and the 0°C to 70°C temperature range.
Does the TMS320BC53PQ57 need external memory?
The TMS320BC53PQ57 includes 8.1 kB of internal memory, but that capacity may be insufficient for code, coefficient tables, histories, and working buffers in a practical signal-processing system. The manufacturer datasheet should be used to determine the processor’s external-memory interface, addressability, bus timing, and required support components. If algorithm storage or data buffers exceed the internal resources, select compatible external memory and include it in the bus-timing analysis.
How should TMS320BC53PQ57 be used in a DSP design?
Use the TMS320BC53PQ57 as the real-time computation core of a digital signal-processing subsystem, supported by the clock, memory, interface, and power circuitry defined by the manufacturer. Load fixed-point algorithms after establishing an integer-scaling plan, and use cycle-accurate profiling to measure multiply-accumulate and data-transfer bottlenecks. Layout work should begin with the exact 132-pin BQFP land pattern and a complete pin-assignment review rather than a generic package outline.

נתוני עזר הנדסיים עבור TMS320BC53PQ57 — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose TMS320BC53PQ57 when maintaining a TMS320BC53 fixed-point platform is essential and the 132-pin BQFP, 57 MHz clock, and 28.5 MIPS performance match an established design. TMS320BC53PQA57 is the first replacement candidate to inspect because it remains in the same processor family, but ordering-code, temperature-grade, and revision details still require confirmation. Consider TMS320C32PCM60 when a same-family option near the target clock is useful, while TMS320C32PCM40 trades about 29.8% of clock frequency for potentially different timing and resource requirements. TMS320C31PQL60 has a 32-bit data bus, and TMS320BC51PQA80 is identified at 80 MHz; neither should be approved as a drop-in replacement without a complete pin, peripheral, timing, thermal, and software review.

השוואה עם חלופות

פרמטר מוצר זה TMS320BC53PQA57 TMS320C31PQL60 TMS320C32PCM40 TMS320C32PCM60 TMS320BC51PQA80
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Processor Family TMS320C5x TMS320BC53 TMS320C31 TMS320C32 TMS320C32 TMS320BC51
Digital Arithmetic Fixed-point Fixed-point Fixed-point Fixed-point Fixed-point Fixed-point

מבדילים עיקריים

  • Targeted TMS320BC53 architecture (לעומתTMS320BC51PQA80)
  • Lower bus width simplifies matching legacy fixed-point designs (לעומתTMS320C31PQL60)
  • Near-clock TMS320C5x replacement candidate (לעומתTMS320C32PCM60)

הערות תכנון

Use the manufacturer package drawing to create the 132-pin BQFP land pattern rather than approximating it from the 24.13 mm body size. Confirm pad width, pad length, pitch, toe exposure, and courtyard clearance against the PCB assembler’s capabilities. Because every side of the package carries dense leads, plan power and clock escape routes before general signal routing and avoid copper or mask features that violate the package keepout.

Plan a dedicated 5 V supply distribution path with local high-frequency decoupling placed directly at the processor supply pins. The manufacturer datasheet’s supply-pin grouping and recommended capacitor values should control the layout. Keep switching-regulator loops and high-current digital paths away from clock and analog reference areas, and verify startup sequencing, supply tolerance, ripple, and voltage droop under the worst processor activity condition.

Route the processor clock as a controlled-impedance net and keep its trace short, with the clock source, series damping, and load network placed according to the manufacturer reference design. Provide continuous return paths beneath high-speed signals and avoid split-plane transitions. The 57 MHz operating rate and extensive external-memory interface make rise-time control more important than trace length alone when determining whether additional termination or layer transitions are required.

Do not treat the shared 132-pin BQFP outline as proof that every alternate processor is a drop-in replacement. Compare the complete pin-description tables, peripheral assignments, clock limits, memory interface, voltage requirements, and software model. In particular, TMS320C31PQL60 uses a 32-bit data bus while the target processor has a 16-bit CPU, and the 80 MHz BC51 candidate has a substantially different clock rate; verify hardware and code compatibility before substitution.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The product descriptions do not provide a definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement. Use the manufacturer environmental-material declaration for the exact ordering code before making a compliance declaration.

הנתונים אומתו בתאריך: 2026-11-10 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

TMS320BC53PQ57 datasheet TMS320BC53PQ57 specifications TMS320BC53PQ57 pinout TMS320BC53PQ57 datasheet pdf TMS320BC53PQ57 equivalent TMS320BC53PQ57 replacement TMS320BC53PQ57 vs TMS320C31PQL60 TMS320BC53PQ57 vs TMS320BC51PQA80 TMS320BC53PQ57 BQFP footprint TMS320BC53PQ57 application circuit Texas Instruments TMS320BC53PQ57 TMS320BC53PQ57 price TMS320BC53PQ57 stock TMS320BC53PQ57 lead time TMS320BC53PQ57 fixed point DSP

רכיבים ומונחים קשורים

Texas Instruments TMS320BC53PQ57 TMS320BC53 TMS320BC53PQA57 TMS320C31PQL60 TMS320C32PCM40 TMS320C32PCM60 TMS320BC51PQA80 Digital signal processor DSP Fixed-point processor TMS320C5x Digital signal processing Real-time signal processing Multiply-accumulate operation FIR filter IIR filter Modulation Spectral analysis 57 MHz 28.5 MIPS 16-bit CPU 8.1 kB internal memory 132-pin BQFP Lead surface mount
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר