TMS320C6421ZWT5 - 500MHz Fixed-Point DSP | Texas Instruments
MPN: TMS320C6421ZWT5 ✓ פעילTMS320C6421ZWT5 סקירה
A digital signal processor is a specialized microprocessor architecture optimized for recurring operations such as filtering, transforms, modulation, and waveform analysis. Unlike a general-purpose processor, the TMS320C6421 family combines a C64x+ very-long-instruction-word core with parallel data paths and dedicated memory interfaces. This hierarchy places the device at the intersection of embedded processor, real-time signal-processing, communications infrastructure, industrial control, and multimedia equipment.
The C64x+ architecture supports eight 32-bit instructions per cycle and is software-compatible with the C64x generation, according to the manufacturer datasheet description. At 500 MHz, the processor is suited to workloads that require deterministic throughput, including audio and video processing, communications infrastructure, control loops, and network packet handling. The 8-bit EMIFA provides a byte-oriented external interface, while the 16-bit DDR2 and SDRAM interfaces support wider, higher-throughput memory transfers.
The TMS320C6421ZWT5 is offered as a commercial-temperature device. Its ZWT package contains 361 terminals, making high-density PCB layout, via-in-pad construction, thermal management, and careful power delivery essential. The listing identifies the processor as fixed-point and records 96 KB of associated memory, while other detailed RAM organization, core supply limits, I/O voltage ranges, and thermal-resistance figures require confirmation from the complete manufacturer datasheet and corresponding board-support documentation.
Typical deployments include media gateways, industrial image and signal processing, communications infrastructure, embedded audio systems, and high-speed control equipment. The external-memory architecture allows working data to remain outside the processor while the C64x+ core performs computationally intensive filtering or frame analysis. In each case, sustained memory bandwidth and deterministic interrupt latency can be as important as raw clock frequency.
For a new PCB, place the processor, DDR2 and SDRAM interfaces, EMIFA signals, and power planes according to the manufacturer reference layout. Use the device power-up sequence, decoupling network, and signal-integrity rules from the datasheet rather than generalizing them from another DSP. Confirm thermal performance at the intended ambient temperature because a 361-ball package can concentrate heat beneath the processor.
This page combines the exact package, clock, interface, memory, and ordering information with practical guidance for evaluating this DSP, its temperature-grade alternatives, and the engineering checks required before committing a 361-ball design to production.
חלופות תחליף ישיר עבור TMS320C6421ZWT5 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם TMS320C6421ZWT5 (אותו גורם צורה וטביעת רגל) — שונים ב Junction Temperature Range.
TMS320C6421ZWTQ5
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
TMS320C6421ZWT5 מפרטים
| Device Type | C64x+ fixed-point digital signal processor |
| Maximum Listed Clock Frequency | 600 MHz |
| Part-Specific Clock Frequency | 500 MHz |
| CPU Architecture | C64x+ VLIW |
| Instructions per Cycle | 8 x 32-bit instructions |
| EMIFA Data Width | 8 bit |
| DDR2 Data Width | 16 bit |
| SDRAM Data Width | 16 bit |
| On-Chip Memory | 96 KB |
| מארז | 361-ball NFBGA (ZWT), 16 x 16 mm |
| Terminal Count | 361 balls |
| Core Supply Voltage | 1.2 V |
| Junction Temperature Range | 0 °C to 90 °C |
| Temperature Grade | Commercial |
| Termination Form | Ball |
| סטטוס RoHS | RoHS |
מדריך תצורת פינים של TMS320C6421ZWT5 361-ball nfbga (zwt), 16 x 16 mm
תצורת פינים עבור TMS320C6421ZWT5 (מארזת 361-ball nfbga (zwt), 16 x 16 mm). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור TMS320C6421ZWT5.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
TMS320C6421ZWT5 מתאים עבור 6 יישוםs: Communications Infrastructure, Industrial Signal Processing, Audio and Media Processing, Network Packet Processing, High-Speed Control Systems, Video and Image Processing.
Communications Infrastructure
The TMS320C6421ZWT5 fits communications infrastructure because its C64x+ VLIW core executes eight 32-bit instructions per cycle at a 500 MHz device rating. The 16-bit DDR2 and SDRAM paths can feed packet, framing, filtering, and signal-processing algorithms with high throughput. A 361-ball NFBGA requires controlled escape routing and return paths, while the EMIFA can support byte-oriented peripheral or legacy-memory connections. The key design check is sustained memory bandwidth under the worst-case traffic pattern.
מומלץ
Industrial Signal Processing
The TMS320C6421ZWT5 is appropriate for industrial signal-processing systems that require deterministic fixed-point computation rather than general-purpose software execution. Its C64x+ core can perform filtering, transforms, and adaptive processing while the external-memory interfaces keep large working sets outside the on-chip 96 KB. Commercial temperature suitability must be checked against the enclosure's worst-case conditions. Dense BGA routing and final-enclosure thermal validation are as important as the nominal 500 MHz clock.
מומלץ
Audio and Media Processing
The TMS320C6421ZWT5 supports audio and media applications that combine repeated filtering with high-rate data movement. The eight-wide C64x+ execution model provides deterministic throughput, while 16-bit DDR2 and SDRAM interfaces suit frame buffers and sample data. The 8-bit EMIFA can accommodate byte-oriented peripherals where its timing and voltage requirements are met. Designers should balance memory-controller efficiency against processor load and verify signal integrity between the 361-ball processor and external memory.
מומלץ
Network Packet Processing
The TMS320C6421ZWT5 can serve as a dedicated packet-processing engine when predictable execution and parallel data movement are required. Its fixed-point C64x+ architecture supports protocol parsing, filtering, classification, and buffering tasks at a 500 MHz device rating. DDR2 or SDRAM can accommodate packet queues and look-up structures, while EMIFA provides a separate byte-wide interface for selected peripherals. Memory bandwidth, cache behavior, and interrupt latency should be modeled with production traffic rather than synthetic single-function tests.
מומלץ
High-Speed Control Systems
The TMS320C6421ZWT5 is suitable for high-speed control and measurement systems that benefit from a dedicated DSP core, external memory, and deterministic timing. Filtering, spectral analysis, and complex control algorithms can run concurrently with data acquisition through the 8-bit EMIFA. The design must account for the 1.2 V core supply and the I/O requirements listed for the complete interface set. For production use, verify sampling latency, memory timing margins, and thermal behavior with the complete board implementation.
מומלץ
Video and Image Processing
The TMS320C6421ZWT5 can support image and video functions that require repeated arithmetic and sustained access to external frame data. Its eight 32-bit C64x+ instructions per cycle support parallel filtering and transform operations, while the 16-bit DDR2 or SDRAM interface accommodates larger buffers. Because the device is a fixed-point processor, scaling and numerical-range analysis are essential. The 361-ball package also requires a manufacturing process capable of handling its density and inspection requirements.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור TMS320C6421ZWT5 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | TMS320C6421ZWTQ5 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 361-ball NFBGA (ZWT), 16 x 16 mm | ZWT package; exact physical dimensions require confirmation |
| Processor Type | C64x+ fixed-point DSP | C64x+ fixed-point DSP |
| Clock Frequency | 500 MHz | 400 MHz, 500 MHz, or 600 MHz family options; exact grade-dependent maximum requires confirmation |
| Instructions per Cycle | 8 x 32-bit instructions | 8 x 32-bit instructions |
| EMIFA Interface | 8 bit | 8 bit |
| DDR2 and SDRAM Interface | 16-bit DDR2 and SDRAM | 16-bit DDR2 and SDRAM |
| On-Chip Memory | 96 KB | 96 KB |
| Temperature Grade | Commercial; 0 °C to 90 °C junction-temperature listing | Different ordering grade; exact limits require confirmation |
| Core Supply | 1.2 V | 1.2 V |
| Special Feature | Software-compatible with C64x architecture | Software-compatible with C64x architecture |
מבדילים עיקריים
- Same-footprint temperature-grade alternative (לעומתTMS320C6421ZWTQ5)
- Dedicated parallel signal-processing throughput (לעומתGeneral-purpose microcontrollers)
- Purpose-built external-memory architecture (לעומתTMS320DM6435ZWT6)
הערות תכנון
Use the Texas Instruments recommended land pattern, via-in-pad arrangement, ball assignments, and reference stack-up for the 361-ball ZWT package. Keep DDR2 and SDRAM routing short and matched, preserve continuous return paths beneath high-speed nets, and separate the EMIFA byte interface from sensitive clocks and analog inputs. Do not release fabrication output until every ball has been checked against the official pin-description table.
Implement the processor's complete power architecture exactly as specified in the manufacturer datasheet, including the 1.2 V core rail, required I/O rails, sequencing, reference voltages, and decoupling. Verify voltage tolerance, droop, startup current, and supply-noise margins at the package balls. A nominal clock of 500 MHz does not establish power-supply suitability by itself; the relevant limit is the datasheet condition for the selected operating mode.
Model heat flow through the 16 x 16 mm BGA using the manufacturer's thermal data and the actual PCB stack-up. Apply the specified via pattern and copper construction rather than relying on the package outline alone. Test the assembled unit in its final enclosure at the highest expected ambient temperature, and measure junction temperature or use a validated thermal model. External memory placement and adjacent power components can materially affect the thermal outcome.
Treat clock distribution, memory interfaces, EMIFA, and power-reference nets as separate constraint groups. Use the datasheet's recommended topologies for PLL and memory-reference connections, and avoid adding impedance-changing structures without signal-integrity analysis. Since the package has 361 balls, escape-routing congestion can drive layer-count or via decisions; validate the complete stack-up with the board-design rules used for DDR2.
Do not substitute the processor solely because a search result displays the same C64x+ family name. Confirm the exact package code, temperature or qualification grade, pin assignments, device revision, memory electrical limits, and software initialization requirements. Also avoid copying a PCB layout from a different ZWT device without proving that its power balls, memory interface, and reference connections are electrically identical.
מידע על תאימות
The LCSC product listing identifies TMS320C6421ZWT5 as RoHS. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was established in the available product records.