TMS320C6424ZWT4 - 400MHz C64x+ Fixed-Point DSP | Texas Instruments
MPN: TMS320C6424ZWT4 ✓ פעילTMS320C6424ZWT4 סקירה
A digital signal processor is a semiconductor designed to execute mathematically intensive algorithms in real time. Its architecture combines program memory, data memory, parallel execution units, specialized addressing, and high-throughput peripherals. Within the product hierarchy, the TMS320C6424 belongs to the Texas Instruments C64x+ DSP family, which sits within the broader digital signal processor, embedded processor, and semiconductor categories. This architecture is especially useful when an algorithm requires predictable execution, parallel arithmetic operations, and deterministic data movement.
The principal feature set includes a 400 MHz C64x+ core, fixed-point processing, a 32-bit DSP designation, and a maximum nominal throughput of 3200 MIPS as reported for this orderable MPN. Its external memory interface supports 16-bit and 8-bit EMIFA devices together with 32-bit and 16-bit DDR2 or SDRAM configurations. These interfaces allow the processor to connect with external program and data memories while retaining high-bandwidth access to images, audio, communications buffers, and other working data.
The 361-contact NFBGA package supports dense integration on complex DSP modules and industrial communication platforms. Its large pin count provides access to the C64x+ interfaces and dedicated external-memory signals, but it also demands careful PCB construction. Fine-pitch escape routing, multilayer board design, controlled impedance, ground-plane continuity, and effective decoupling become essential because the processor combines high-speed digital signaling with external-memory buses.
Typical applications include industrial machine vision, video and image processing, communications infrastructure, radar and sonar signal chains, audio processing, and embedded control systems that require deterministic DSP throughput. The EMIFA and DDR2 or SDRAM capabilities are especially relevant when samples or image frames exceed on-chip memory or when parallel external devices require sustained transfers.
A key design consideration is the distinction between the orderable 400 MHz device and the broader TMS320C6424 family, which the manufacturer describes as supporting operation up to 600 MHz. Design clocking, memory speed, thermal conditions, and power delivery around the exact TMS320C6424ZWT4 rating rather than the maximum family headline. This page also organizes sourcing information, replacement constraints, interface guidance, and practical PCB considerations around that exact device ordering.
חלופות תחליף ישיר עבור TMS320C6424ZWT4 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם TMS320C6424ZWT4 (אותו גורם צורה וטביעת רגל) — שונים ב External Memory Interface.
TMS320C6424ZWT7
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←TMS320C6424ZWT4 מפרטים
| Device Type | C64x+ fixed-point digital signal processor |
| Maximum Device Frequency | 400 MHz |
| Processor Architecture | C64x+ |
| DSP Word Length | 32 bit |
| Nominal Processing Capability | 3200 MIPS |
| מארז | 361-pin NFBGA (ZWT) |
| Package Body Size | 16 x 16 mm |
| External Memory Interface | 16/8-bit EMIFA |
| DDR Memory Support | 32/16-bit DDR2 and SDRAM |
מדריך תצורת פינים של TMS320C6424ZWT4 16 x 16 mm
תצורת פינים עבור TMS320C6424ZWT4 (מארזת 16 x 16 mm). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור TMS320C6424ZWT4.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
TMS320C6424ZWT4 מתאים עבור 6 יישוםs: Industrial Machine Vision, Communications Signal Processing, Audio Processing, Radar and Sonar Processing, Video and Image Processing, Industrial Control and Automation.
Industrial Machine Vision
The TMS320C6424ZWT4 fits industrial machine-vision controllers that must apply filtering, thresholding, feature extraction, and image analysis with predictable execution timing. Its 400 MHz C64x+ fixed-point core and 3200 MIPS nominal processing capability provide parallel arithmetic throughput for pixel pipelines, while 16/8-bit EMIFA and 32/16-bit DDR2 or SDRAM support can accommodate frame buffers and parallel image-capture devices. Design the memory system around the required image resolution, sustained frame rate, and camera interface bandwidth. Fine-pitch BGA escape routing, continuous power and ground planes, and high-frequency decoupling are essential to prevent signal-integrity and thermal problems in an industrial enclosure.
מומלץ
Communications Signal Processing
The TMS320C6424ZWT4 is appropriate for communications equipment that performs filtering, modulation-related computation, equalization, or packet-oriented signal analysis. The 400 MHz C64x+ architecture supplies high fixed-point throughput for real-time data paths, while EMIFA and DDR2 or SDRAM connectivity supports external line buffers and high-speed working memory. Designers should partition time-critical sample processing from lower-latency control functions and validate memory bandwidth against sustained traffic. The 361-pin NFBGA also demands controlled-impedance routing for external-memory signals, careful clock distribution, and a multilayer ground structure that minimizes return-path discontinuities.
מומלץ
Audio Processing
The TMS320C6424ZWT4 can serve as the central DSP in professional audio, voice-processing, or sound-analysis equipment when multiple fixed-point channels must be processed concurrently. Its 400 MHz clock and parallel C64x+ execution model support filtering, mixing, dynamics processing, and spectral transforms, while the external-memory interfaces prevent large sample buffers from limiting the processor. The exact DSP operating modes, peripherals, clocking, and boot behavior should be configured from the family documentation. For low-latency audio, place working memory and interface circuitry according to the timing constraints, use local decoupling at every supply rail, and keep high-current return paths away from sensitive signal-routing areas.
מומלץ
Radar and Sonar Processing
The TMS320C6424ZWT4 is well matched to embedded radar or sonar front ends that require high-throughput filtering, correlation, spectral analysis, and detection processing. Its C64x+ fixed-point core executes mathematically intensive operations at up to 400 MHz, and the external-memory architecture permits access to large sample or working buffers through EMIFA, DDR2, or SDRAM. System partitioning should keep acquisition timing deterministic and avoid relying on general-purpose operating-system scheduling for the critical signal chain. Use the manufacturer timing and interface requirements to define memory depth, clock ratios, and bus loading, while implementing controlled impedance and robust thermal paths in the multilayer PCB.
מומלץ
Video and Image Processing
The TMS320C6424ZWT4 supports embedded video preprocessing, scaling, color conversion, and pixel-level filtering when a fixed architecture is preferable to a general-purpose processor. The 400 MHz C64x+ core offers parallel fixed-point execution, and the 32/16-bit DDR2 or SDRAM path can provide the bandwidth needed for frame buffers. External video interfaces and synchronization timing must be implemented with deterministic clocking and buffering rather than left to variable-latency software tasks. The 361-pin NFBGA requires a multilayer board with uninterrupted power planes, short decoupling connections, length-aware routing, and adequate copper area to control junction temperature under sustained frame-processing load.
מומלץ
Industrial Control and Automation
The TMS320C6424ZWT4 can be used in sophisticated industrial controllers when real-time signal analysis must be combined with deterministic control logic. Its 400 MHz C64x+ core can execute filtering, vibration analysis, or predictive-processing algorithms, while the EMIFA, DDR2, and SDRAM interfaces connect to sensors, converters, and external memory. Partition the design so control loops meet strict deadlines independently from bulk data transfer and operating-system activity. Configure boot and clocking according to the exact device options, and verify electrical characteristics and memory timing against the manufacturer datasheet before releasing the board for production.
מומלץ
נתוני עזר הנדסיים עבור TMS320C6424ZWT4 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | TMS320C6424ZWT7 |
|---|---|---|
| Package | 361-pin NFBGA (ZWT), 16 x 16 mm | 361-pin NFBGA (ZWT) |
| Brand | Texas Instruments | Texas Instruments |
| Device Type | C64x+ fixed-point digital signal processor | TMS320C6424 family DSP |
מבדילים עיקריים
- Exact 400 MHz orderable configuration (לעומתTMS320C6424ZWT7)
- Broad external-memory connectivity (לעומתTMS320C6424ZWT7)
- Dense 361-pin integration (לעומתTMS320C6424ZWT7)
הערות תכנון
Design the 361-pin NFBGA board with a multilayer stackup that supports power distribution, high-speed external-memory routing, and short return paths. Follow the Texas Instruments package drawing and datasheet layout guidance for ball escapes, via placement, and pad geometry. Keep DDR2, SDRAM, and EMIFA routes impedance controlled, avoid right-angle transitions, and place decoupling close to the relevant supply balls. Validate the final stackup and escape strategy against the selected memory devices rather than relying on a generic BGA rule set.
Separate core and I/O supply planning, and size every rail for the maximum frequency, external-memory activity, and temperature conditions of the design. Use the manufacturer electrical-characteristics table for supply tolerances and current limits. Estimated: the device dissipation equals the sum of each supply voltage multiplied by its measured operating current, plus external-memory and I/O dissipation; obtain those currents from the exact operating state rather than substituting a generic maximum. Place bulk and high-frequency decoupling at the package and memory-device locations to control supply impedance.
Preserve clock and memory-signal integrity by using a continuous reference plane, avoiding plane splits beneath active routes, and matching external-memory topology to the timing requirements of the selected DDR2, SDRAM, or EMIFA devices. Sequence the escape vias according to the package pin assignment so that the hardest signal classes are not forced into unnecessarily long routes. Perform post-layout signal-integrity and return-path reviews with actual stackup data, including connector, via, and component parasitics where they materially affect the critical interfaces.
Do not treat the 600 MHz family headline as the operating frequency of the exact TMS320C6424ZWT4, which is listed at 400 MHz. Also do not assume that every TMS320C6424 ordering shares the 361-pin ZWT footprint; the ZDU ordering has a different package. Before substitution, compare clock limits, temperature grade, memory-interface population, boot behavior, device identification, software initialization, and every exposed-ball connection. A successful board replacement requires both hardware and firmware validation.
מידע על תאימות
The available product and distributor records do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for this orderable MPN. AEC-Q100 is treated as not applicable because no automotive qualification is indicated.