TPA311DGNG4 - 350mW Mono Class-AB Amplifier | Texas Instruments
MPN: TPA311DGNG4 ✓ פעילTPA311DGNG4 סקירה
An audio power amplifier is an integrated circuit that increases the voltage and current capability of an audio signal so it can drive a speaker or another energy-converting acoustic load. The TPA311DGNG4 belongs to the Class-AB amplifier family, where the output transistors conduct during opposite portions of the audio waveform. Compared with a switching Class-D amplifier, this topology provides a straightforward implementation for low-power audio while retaining the output-filtering requirements associated with a linear amplifier.
The primary rated feature is its 350 mW audio output power in a single-channel configuration. The device is identified as a mono amplifier with an 8-pin HVSSOP package, also described in listings as HTSSOP. Its industrial temperature grade and surface-mount construction make it appropriate for compact boards where component count, PCB area, and assembly compatibility are important. Additional operating details such as supply voltage, load impedance, gain settings, and distortion limits should be selected from the manufacturer datasheet.
The TPA311 family is commonly used to create a compact audio output stage from a low-voltage source. Its Class-AB architecture is suited to applications that do not require the efficiency of a switching amplifier. System designers should account for output-filtering requirements, DC offset, thermal behavior, and speaker impedance when establishing the surrounding analog and passive-component network.
Typical uses include portable or desk speakers, small industrial audible alarms, compact control-panel speakers, audio-enabled sensors, and small consumer products. The single-channel architecture is particularly useful when a design requires only one speaker output or when several amplifier channels are arranged as separate mono stages. It can also support stereo systems when two appropriately configured devices are used.
For PCB design, keep the amplifier input, feedback or gain-setting network, supply decoupling, output path, and output-filter components close to their associated pins. Confirm the exposed-pad and thermal requirements in the package drawing, provide adequate copper for heat spreading, and follow the manufacturer’s recommended input and output filtering to avoid instability or excessive distortion.
This product page combines the confirmed 350 mW mono Class-AB specifications, package details, sourcing guidance, drop-in alternatives, and practical implementation considerations into one engineering-oriented reference for audio-power design.
חלופות תחליף ישיר עבור TPA311DGNG4 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם TPA311DGNG4 (אותו גורם צורה וטביעת רגל) — שונים ב Product Type, Output Configuration, Package.
TPA311DGN
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←TPA321DGN
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←TPA711DGNR
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
TPA701DGN
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
TPA311DGNG4 דירוגים מרביים ומאפיינים חשמליים
| Product Type | Mono Class-AB audio power amplifier |
| Rated Output Power | 350 mW |
| Output Channel Count | 1 channel |
| Amplifier Class | Class AB |
| Package Type | 8-pin HVSSOP |
| Terminal Count | 8 terminals |
| סוג הרכבה | Surface mount |
| Temperature Grade | Industrial |
| Terminal Form | Gull wing |
| Package Shape | Square |
| Package Code | HTSSOP |
מדריך תצורת פינים של TPA311DGNG4 htssop
תצורת פינים עבור TPA311DGNG4 (מארזת htssop). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.
אין נתוני פריסת פינים מפורטים עבור TPA311DGNG4.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
TPA311DGNG4 מתאים עבור 6 יישוםs: Compact Desktop Speaker, Industrial Audible Alarm, Portable Device Speaker, Audio-Enabled Sensor Module, Control-Panel Feedback Speaker, Two-Channel Stereo Arrangement.
Compact Desktop Speaker
The TPA311DGNG4 fits a compact desktop or shelf speaker that needs one low-power mono output channel. Its confirmed 350 mW rating provides useful output for a small near-field driver without requiring a high-power audio amplifier. The Class-AB topology also avoids introducing a switching stage into a simple signal chain, although the design must accommodate the filtering and stability requirements of a linear output. PCB placement should keep the input and gain-setting components away from the output return, while the supply and output capacitors should follow the manufacturer reference layout.
מומלץ
Industrial Audible Alarm
The TPA311DGNG4 can drive the speaker in a compact industrial alarm or notification module where the audio channel is intentionally limited to one output. Its 350 mW capability is suited to low-volume alert tones and short-duration messages rather than public-address or high-fidelity output. The industrial temperature grade makes it a logical starting point for factory equipment, but the exact operating-temperature limits must be confirmed from the datasheet. The design should include input filtering, stable gain configuration, and a speaker-return path that minimizes noise coupling into sensitive control circuitry.
מומלץ
Portable Device Speaker
The TPA311DGNG4 is applicable to a portable product with a small internal speaker and one required audio channel. Its 350 mW output rating offers a practical power level for compact speakers, while the 8-pin HVSSOP package helps conserve board area. A portable design must still verify supply-voltage limits, efficiency, battery impact, thermal rise, and output-filter component selection because the available records do not establish those operating values. Place the amplifier near the speaker connector, maintain a compact return path, and decouple the supply close to the device pins to reduce conducted and radiated interference.
מומלץ
Audio-Enabled Sensor Module
The TPA311DGNG4 can provide a local audible-output function for an IoT sensor, smart-home controller, or compact monitoring module. A single mono channel is sufficient for status tones, confirmation beeps, and simple spoken prompts, and the 350 mW rating covers modest miniature-speaker loads. The amplifier should be isolated from high-impedance sensor circuitry to avoid loading or injecting audible noise into the measurement path. Use a controlled input source, maintain short feedback and gain-setting routes, and verify the complete power-supply layout so motor activity, relay switching, or wireless circuitry does not degrade the audio output.
מומלץ
Control-Panel Feedback Speaker
The TPA311DGNG4 is suitable for a control panel that uses one miniature speaker for button confirmation, menu feedback, or diagnostic tones. Its 350 mW mono rating is sufficient for localized acoustic feedback while its 8-pin surface-mount package simplifies integration into densely populated control electronics. Designers should establish the acceptable output level, bandwidth, and distortion criteria before fixing the gain network. The layout should separate the audio input from switching-regulator and display circuitry, and the output network must be selected to reproduce the intended response without allowing excessive high-frequency or inductive radiation.
מומלץ
Two-Channel Stereo Arrangement
Two TPA311DGNG4 devices can form the left and right channels of a small stereo system when both channels require the same 350 mW mono Class-AB output rating. Using matched amplifiers simplifies channel consistency, although each device still needs its own input network, supply decoupling, output filtering, and grounding strategy. The implementation must prevent channel-to-channel signal coupling and verify whether the package thermal pad requires a specific copper pattern. For systems needing greater efficiency or lower output power, the 250 mW TPA321DGN may be considered only after its bridge-tied-load architecture and operating conditions are reviewed.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור TPA311DGNG4 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | TPA311DGN | TPA321DGN | TPA711DGNR | TPA701DGN |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 8-HVSSOP (DGN) | 8-HVSSOP (DGN) - same | 8-HVSSOP (DGN) - same | 8-HVSSOP (DGN) - same | 8-HVSSOP (DGN) - same |
| Channel Count | 1 mono channel | 1 mono channel | 1 mono channel | 1 mono channel | 1 mono channel |
| Amplifier Class | Class AB | Class AB | Bridge-tied-load Class D | Class AB | Class AB |
| Package Terminal Count | 8 terminals | 8 terminals | 8 terminals | 8 terminals | 8 terminals |
מבדילים עיקריים
- Higher confirmed output rating than the listed TPA321DGN configuration (לעומתTPA321DGN)
- Direct same-family relationship with TPA311DGN (לעומתTPA311DGN)
- Lower output-power class than TPA311DGNG4 (לעומתTPA711DGNR)
- Single-purpose linear output versus bridge-tied-load architecture (לעומתTPA321DGN)
הערות תכנון
Place the input, gain-setting, and feedback components close to their corresponding amplifier pins, and keep the output-filter network close to the output connection. Maintain a compact, low-impedance supply return from the decoupling capacitor to the ground pins. The current records do not expose the complete pin map, so assign tracks only after checking the Texas Instruments package drawing and application circuit.
Estimated: with a 350 mW audio output, the actual average IC dissipation is lower than the output rating but remains dependent on supply voltage, load impedance, quiescent current, and signal level. Use the datasheet maximum-power-dissipation and thermal-resistance figures with the actual enclosure and PCB copper area. Do not infer junction temperature from output power alone.
For a Class-AB amplifier, follow the manufacturer’s recommended input and output filtering to control high-frequency gain and prevent instability. Check the gain network for values outside the validated range, and keep the speaker return electrically quiet. If substituting TPA321DGN or another related amplifier, repeat the filtering analysis because a bridge-tied-load output can require different output-network treatment.
Do not substitute a device solely because it uses a DGN-family package. Confirm input type, gain configuration, shutdown or enable behavior, supply limits, load impedance, output topology, and exposed-pad requirements. The TPA321DGN’s bridge-tied-load architecture and 250 mW listed output differ materially from the TPA311DGNG4’s 350 mW Class-AB configuration.
מידע על תאימות
The exact material-compliance status is not stated in the available component records. The product-number suffix may indicate a green finish, but compliance must be confirmed for the exact orderable MPN using current manufacturer documentation.