TUSB7320RKMT - 2-Port USB 3.0 xHCI Controller | Texas Instruments
MPN: TUSB7320RKMT ✓ פעילTUSB7320RKMT סקירה
A USB host controller is a system interface IC that manages transactions between a host computer and attached USB peripherals. An xHCI controller supports USB 3.0 SuperSpeed as well as backward-compatible USB 2.0 operation. The TUSB7320 belongs to the USB interface controller hierarchy, combining USB device connectivity, PCIe host attachment, clocking, power management, and protocol handling in one surface-mount device.
Key features include support for up to two downstream ports, USB 3.0 compliance, a PCIe x1 Gen 2 system interface, and a 9 x 9 mm 100-WQFN package with an exposed thermal pad. The exposed pad provides the primary path for heat dissipation and must be connected to the PCB ground plane according to the land pattern and thermal design guidance. Separate 1.1 V and 3.3 V supply requirements support internal core and I/O power domains.
The TUSB7320 connects to the host system through PCIe while providing a structured USB interface for downstream ports. This division of responsibilities allows a processor or embedded host to enumerate devices, manage transfers, and control bus resources while the dedicated controller handles USB protocol activity. Exact lane, timing, current, and performance details should be confirmed against the manufacturer datasheet before a design is released for production.
Typical applications include industrial embedded computers, medical equipment, test and measurement systems, set-top and media platforms, USB hubs or docking systems, and other embedded hosts that need multiple USB 3.0 ports. The two-port configuration is particularly useful where system space is constrained and separate downstream connectors are required without expanding to a four-port TUSB7340 implementation.
PCB design should prioritize short high-speed USB and PCIe routes, continuous reference planes, adequate power decoupling, and thermal management around the exposed pad. Confirm the exact RKM land pattern, pin assignments, capacitor values, and routing constraints in the manufacturer datasheet before layout release. Prototype validation should also cover power sequencing, connector compliance, thermal rise, and simultaneous SuperSpeed and USB 2.0 device operation.
This product page combines the exact TUSB7320RKMT ordering information, package and interface characteristics, manufacturer resources, pin-compatible alternatives, comparison points, and practical integration guidance. It is intended to help engineers qualify the device faster while preserving the distinction between the two-port TUSB7320 and the four-port TUSB7340.
חלופות תחליף ישיר עבור TUSB7320RKMT — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם TUSB7320RKMT (אותו גורם צורה וטביעת רגל) — שונים ב Number of Downstream Ports, Operating Temperature, Package, Function, Host Interface.
TUSB7340RKMT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←TUSB7320IRKMT
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
TUSB7340IRKMT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←TUSB7340IRKMR
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
TUSB8020BPHPR
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←TUSB7320RKMT מפרטים
| Product Type | USB 3.0 xHCI host controller |
| Number of Downstream Ports | Up to 2 ports |
| USB Interface Standard | USB 3.0 |
| Host System Interface | PCIe x1 Gen 2 |
| מתח אספקה | 1.1 V and 3.3 V |
| טמפרטורת פעולה | 0°C to 70°C |
| מארז | 100-WQFN dual rows with exposed pad |
| Package Family | RKM 100-pin WQFN |
| Package Dimensions | 9 mm x 9 mm |
| מספר פינים | 100 pins |
| סוג הרכבה | Surface mount |
| Thermal Pad | Exposed pad |
| Backward Compatibility | USB 3.0 xHCI host controller |
מדריך תצורת פינים של TUSB7320RKMT 9 mm x 9 mm
תצורת פינים עבור TUSB7320RKMT (מארזת 9 mm x 9 mm). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור TUSB7320RKMT.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
TUSB7320RKMT מתאים עבור 6 יישוםs: Industrial Embedded Computer, Medical Equipment, Test and Measurement System, USB Docking Station, Set-Top and Media Platform, Data Acquisition and Storage.
Industrial Embedded Computer
The TUSB7320RKMT fits an embedded industrial computer that requires two USB 3.0 downstream connections and a PCIe attachment to its host processor. Its PCIe x1 Gen 2 interface provides the system-level path for host control, while up to two downstream ports support storage, data acquisition, service, or peripheral connections. The RKMT device is specified from 0°C to 70°C and uses 1.1 V and 3.3 V rails. Place the controller close to the connector and processor interfaces to minimize USB and PCIe trace lengths, while connecting the exposed thermal pad to a continuous PCB ground plane.
מומלץ
Medical Equipment
TUSB7320RKMT can support a medical instrument that exposes up to two USB 3.0 ports to a host platform while using a controlled set of internal supply rails. The two-port configuration is useful for diagnostic peripherals, laboratory instruments, or service interfaces where more than one external connection is required. Its specified 0°C to 70°C RKMT range covers many indoor equipment environments. Medical qualification of the finished system is separate from component selection, so developers should evaluate electrical isolation, EMC, connector safety, software validation, and applicable risk controls during system development.
מומלץ
Test and Measurement System
The TUSB7320RKMT is appropriate for a test and measurement chassis that needs to combine several high-speed peripherals with an embedded host controller. Up to two downstream USB 3.0 ports can serve instruments, storage devices, or external test adapters, while the PCIe x1 Gen 2 host connection supports enumeration and control. Because measurement accuracy can be affected by power and signal integrity, route high-speed interfaces over continuous planes, decouple both the 1.1 V and 3.3 V rails, and isolate noisy external cabling. Validate the complete system for jitter, EMI, thermal performance, and simultaneous device operation.
מומלץ
USB Docking Station
A compact docking station can use the TUSB7320RKMT to provide two SuperSpeed USB 3.0 downstream ports when the host system connects through PCIe. The two-port count is useful for external storage and peripheral combinations without moving to a four-port implementation. The 9 x 9 mm RKM WQFN package preserves board area, although its exposed pad requires adequate copper and thermal relief according to the manufacturer footprint. Place connectors and controller in a signal-conscious arrangement, keep USB differential traces short and length-matched, and provide the required supply current without placing disruptive switching converters near sensitive routes.
מומלץ
Set-Top and Media Platform
The TUSB7320RKMT can provide USB 3.0 connectivity in a set-top, streaming, or media platform that already uses PCIe as its internal host interface. Two downstream ports are sufficient for combinations such as external storage, a display accessory, or a service adapter, particularly where enclosure space is constrained. The controller separates USB protocol handling from the platform processor, which can simplify workload partitioning. Firmware should support the selected controller and the design should validate boot-time device enumeration, connector removal, power management, and recovery behavior. The exposed pad should be tied to the ground and thermal structure specified by Texas Instruments.
מומלץ
Data Acquisition and Storage
TUSB7320RKMT is suitable for an embedded data-acquisition system that must transfer data from high-speed peripherals to a host processor. One downstream port may connect storage while the other supports a test instrument, acquisition module, or service interface. The USB 3.0 protocol handling is consolidated in a dedicated controller, leaving the host processor to manage application processing. Designers should use the manufacturer PCB guidelines for differential routing and reference planes, keep the PCIe and USB paths physically separated from switching-node areas, and validate sustained-transfer operation because connector and cable behavior can materially affect system throughput.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור TUSB7320RKMT — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | TUSB7340RKMT | TUSB7320IRKMT | TUSB7340IRKMT | TUSB7340IRKMR | TUSB8020BPHP |
|---|---|---|---|---|---|---|
| Package | 100-WQFN RKM (9x9 mm) | 100-WQFN RKM (9x9 mm) | 100-WQFN RKM (9x9 mm) | 100-WQFN RKM (9x9 mm) | 100-WQFN RKM (9x9 mm) | 100-WQFN (9x9 mm) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Type | USB 3.0 2-port xHCI host controller | USB 3.0 4-port xHCI host controller | USB 3.0 xHCI host controller | USB 3.0 4-port xHCI host controller | USB 3.0 4-port xHCI host controller | USB 3.0 host controller |
| Downstream Ports | Up to 2 | Up to 4 | 2 | Up to 4 | Up to 4 | 2 |
| USB Standard | USB 3.0 | USB 3.0 | USB 3.0 | USB 3.0 | USB 3.0 | USB 3.0 |
| Pin Count | 100 pins | 100 pins | 100 pins | 100 pins | 100 pins | 100 pins |
| Primary Interface | USB and PCIe | USB and PCIe | USB and PCIe | USB and PCIe | USB and PCIe | USB and PCIe |
מבדילים עיקריים
- Matches the original two-port function without expanding the system port count (לעומתTUSB7340RKMT)
- Uses the TI-compatible 100-pin RKM controller family (לעומתTUSB7340IRKMT)
- Direct two-port family option with the same physical controller footprint (לעומתTUSB8020BPHP)
הערות תכנון
Use the official 100-pin RKM land pattern and route USB 3.0 and PCIe differential pairs over uninterrupted reference planes. Keep the controller and connector interface electrically short, avoid splitting plane regions beneath high-speed pairs, and observe the manufacturer differential-pair geometry and via guidance. Confirm all pin assignments from the RKM pin-description table rather than inferring them from a generic WQFN footprint.
The RKM package uses an exposed pad as its primary thermal path. Connect that pad to the PCB ground and thermal-copper structure specified by Texas Instruments, using the recommended via pattern and solder mask treatment. Do not treat the small nominal package area as adequate by itself; validate junction temperature, copper spreading, and enclosure airflow under sustained USB 3.0 and PCIe activity.
Provide clean, separately decoupled 1.1 V and 3.3 V rails at the controller. Follow the manufacturer capacitor values, voltage ratings, placement, and startup requirements rather than substituting generic bulk capacitance. Check connector-current loads, inrush behavior, auxiliary-power sources, and power-state transitions during prototype testing, since host-controller rails must remain stable during device attach and removal.
Do not treat a shared 100-WQFN outline as proof that every alternative is an exact substitute. TUSB7340 doubles downstream-port capacity, while TUSB7320 and TUSB8020 may require different firmware or validation. Confirm temperature grade, package order code, exposed-pad layout, electrical limits, PCIe compatibility, and supported operating system before releasing a substitution.
מידע על תאימות
The exact environmental and automotive compliance declarations for TUSB7320RKMT were not included in the manufacturer product excerpts. The 0°C to 70°C RKMT temperature rating does not establish AEC-Q100 qualification.