Microchip Technology

USB4640-HZH-03-TR - USB 2.0 Hub Controller | Microchip

MPN: USB4640-HZH-03-TR ✓ פעיל
1.8 V Vdss Integrated Id 48-pin VFQFN exposed pad, 7 x 7 mm Package
כמות הזמנה מינימלית: 1 |

USB4640-HZH-03-TR סקירה

The Microchip Technology USB4640-HZH-03-TR is a USB 2.0 hub controller with an integrated Flash media card reader, a 480 Mbps Hi-Speed Inter-Chip upstream interface, and a 48-pin VFQFN exposed-pad package measuring 7 x 7 mm. It operates from a 1.8 V interface supply and supports applications including cell phones, GPS equipment, personal computers, printers, and set-top boxes.

A USB hub controller is an interface semiconductor that manages one host-facing upstream connection and multiple downstream USB ports. By combining hub-control and Flash-media-reader functions in one device, the USB4640 reduces component count in compact equipment that must connect removable storage while also presenting a full-speed or high-speed USB peripheral interface. Its internal ROM firmware revision is identified by the 03 order-code suffix.

The controller provides port power-switch control, port status monitoring, programmable signal drive, an internal regulator, ESD protection, overcurrent protection, and power-on reset. These functions support dependable USB attachment and removal, controlled downstream-port power, and protection for external interfaces. The HSIC upstream connection offers an alternative to a conventional USB host electrical interface for systems designed around high-speed inter-chip signaling.

The USB4640 family is designed around USB 2.0 hub and Flash-controller operation. Its 480 Mbps upstream interface and integrated storage-controller functions make it appropriate for embedded systems requiring multiple USB connections and removable-media access. The exposed thermal pad provides a direct heat-dissipation path beneath the device, allowing compact placement on multilayer boards when copper and via-array layout provide adequate thermal conductivity.

Typical uses include portable navigation equipment, personal-computer peripherals, printers, set-top boxes, and other embedded USB hosts. In these systems, the device can consolidate downstream USB port management with access to Flash media, reducing connector count and external controller demand. Firmware-specific ordering suffixes should be checked against the host software, supported media devices, and validation requirements.

Layout should prioritize short HSIC and USB routing, continuous reference planes, and an exposed-pad via array connected to the appropriate ground or power plane. Place decoupling capacitors close to the supply pins and follow the package-land-pattern guidance in the manufacturer datasheet. Firmware revision compatibility, downstream-port current limits, and media-card support should be verified before production release.

This product page combines package, interface, application, protection, and lifecycle information with drop-in comparison guidance. It also highlights practical PCB, thermal, and firmware-selection considerations that help engineers evaluate the USB4640-HZH-03-TR for compact USB hub and Flash-media applications.

חלופות תחליף ישיר עבור USB4640-HZH-03-TR — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם USB4640-HZH-03-TR (אותו גורם צורה וטביעת רגל) — שונים ב Package, Order Code.

Microchip Technology
Package: 48-QFN (7 x 7 mm)
Order Code: USB4640I-HZH-03
השווה עם USB4640-HZH-03-TR →
Microchip Technology
Package: 48-QFN (7 x 7 mm)
Order Code: USB4640I-HZH-03-TR
השווה עם USB4640-HZH-03-TR →

USB4640I-HZH-03-TR

✅ Drop-In
Microchip Technology
📦 48-VFQFN exposed pad (7 x 7 mm)
USB 2.0 hub and flash media controller · USB 2.0 · HSIC high-speed inter-chip interface · 48-QFN (7 x 7 mm) · 48 terminals · Square · No-lead surface-mount package · Industrial

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

USB4640I-HZH-03

✅ Drop-In
Microchip Technology
📦 48-VFQFN exposed pad (7 x 7 mm)
USB 2.0 hub and flash media controller · USB 2.0 · HSIC high-speed inter-chip interface · 48-QFN (7 x 7 mm) · 48 terminals · Square · No-lead surface-mount package · Industrial

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

USB4640-HZH-03-TR מפרטים

Product Type USB 2.0 hub controller with Flash media card reader
Upstream Interface Hi-Speed Inter-Chip (HSIC), 480 Mbps
USB Interface Version USB 2.0
Interface Supply Voltage 1.8 V
מארז 48-pin VFQFN exposed pad, 7 x 7 mm
סוג הרכבה Surface mount
Packaging Tape and reel
Firmware Revision Code 03
Downstream Port Power-Switch Control Supported
Port Status Monitoring Supported
Programmable Signal Drive Supported
Internal Regulator Integrated
ESD Protection Integrated
הגנה מפני זרם יתר Integrated
Power-On Reset Integrated
סטטוס RoHS RoHS compliant
Manufacturer Lead Time 4 weeks
Product Status Active

מדריך תצורת פינים של USB4640-HZH-03-TR 48-pin vfqfn exposed pad, 7 x 7 mm

תצורת פינים עבור USB4640-HZH-03-TR (מארזת 48-pin vfqfn exposed pad, 7 x 7 mm). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 48-pin vfqfn exposed pad, 7 x 7 mm עבור USB4640-HZH-03-TR

אין נתוני פריסת פינים מפורטים עבור USB4640-HZH-03-TR.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

USB4640-HZH-03-TR מתאים עבור 6 יישוםs: Portable Navigation Systems, Embedded USB Hub Expansion, Printers and USB Peripherals, Set-Top Box Media Connectivity, Cell Phone and Mobile Accessories, Industrial USB Data Acquisition.

📱

Portable Navigation Systems

USB4640-HZH-03-TR fits portable GPS equipment that needs both downstream USB connectivity and access to Flash media. Its 480 Mbps Hi-Speed Inter-Chip upstream interface provides a compact connection to an HSIC-capable host processor while the integrated USB 2.0 hub manages peripheral ports. Port status monitoring, programmable signal drive, ESD protection, overcurrent protection, and power-on reset support robust peripheral attachment. The 48-VFQFN exposed-pad package also helps preserve board area in navigation units where connector placement and thermal performance are constrained.

🖥️

Embedded USB Hub Expansion

USB4640-HZH-03-TR is appropriate for embedded systems requiring an HSIC host link and managed USB 2.0 downstream ports. Its 480 Mbps HSIC interface avoids using a conventional USB host transceiver between the processor and hub controller, while integrated port power-switch control and status monitoring simplify peripheral power management. ESD and overcurrent protection add interface robustness, and the internal regulator supports a compact implementation. Designers should verify downstream-port current requirements and signal-routing details against the manufacturer application information.

🖨️

Printers and USB Peripherals

USB4640-HZH-03-TR can support printer and peripheral designs that require both an internal USB hub function and removable Flash storage. The USB 2.0 hub section manages downstream device connections, while the integrated Flash media reader provides a common interface for compatible cards or storage devices. Programmable signal drive allows board-level tuning for connected USB signals, and port monitoring assists system-level attachment control. The compact 7 x 7 mm VFQFN package is useful where connector density and exposed-pad thermal management are important design constraints.

📺

Set-Top Box Media Connectivity

USB4640-HZH-03-TR fits set-top boxes that combine USB peripheral support with removable-media access. The 480 Mbps HSIC upstream link offers a high-speed processor interface, and the integrated USB 2.0 hub supports downstream connections within a compact enclosure. Flash media access can reduce the need for a separate reader controller, while ESD protection, overcurrent protection, and power-on reset improve interface resilience. Product qualification should include testing of the intended cards, operating-system drivers, and downstream-device combinations.

📱

Cell Phone and Mobile Accessories

USB4640-HZH-03-TR can serve mobile accessories and phone-based systems that need a consolidated hub and media interface. Its 480 Mbps HSIC upstream interface is suited to hosts with dedicated high-speed inter-chip connectivity, while downstream USB 2.0 ports support peripherals such as storage, input, or communications devices. Integrated power-switch control, port monitoring, ESD protection, and overcurrent protection are valuable in compact products with limited board area. The 48-VFQFN package and exposed pad require careful thermal-via placement to maintain reliable operation.

🏭

Industrial USB Data Acquisition

USB4640-HZH-03-TR supports compact industrial data-acquisition equipment that needs an embedded USB hub and removable-media interface. The 480 Mbps HSIC upstream connection provides a high-rate link to a capable embedded processor, while the USB 2.0 hub section connects external instrumentation or peripheral modules. Programmable signal drive permits board-level signal adjustment, and port status monitoring supports controlled peripheral operation. Integrated overcurrent and ESD protection improve robustness, but the final enclosure, grounding, cable, and ESD design must be evaluated as part of the complete industrial system.

What is USB4640-HZH-03-TR?
USB4640-HZH-03-TR is a Microchip Technology USB 2.0 hub controller with an integrated Flash media card reader and a 480 Mbps Hi-Speed Inter-Chip upstream interface. According to the Microchip USB4640/USB4640i datasheet, the device combines downstream USB hub control with removable-media support in a 48-pin VFQFN exposed-pad package. The 03 suffix identifies the internal ROM firmware revision.
What are the key specifications of USB4640-HZH-03-TR?
The principal specifications of USB4640-HZH-03-TR include a 480 Mbps HSIC upstream interface, USB 2.0 operation, a 1.8 V interface supply, and a 48-pin VFQFN exposed-pad package measuring 7 x 7 mm. The Microchip product documentation also identifies integrated port power-switch control, port status monitoring, programmable signal drive, an internal regulator, ESD protection, overcurrent protection, and power-on reset.
Where can I download the USB4640-HZH-03-TR datasheet PDF?
The USB4640-HZH-03-TR datasheet PDF is available from Microchip Technology at https://ww1.microchip.com/downloads/en/DeviceDoc/4640.pdf. The document covers the USB4640 and USB4640i family, including the 48-pin QFN lead-free package and ordering information. Engineers should also consult the product page for current lifecycle status, ordering options, and related documentation.
Where can I find the USB4640-HZH-03-TR pinout?
The USB4640-HZH-03-TR pin assignments and 48-pin QFN land pattern are defined in the Microchip USB4640/USB4640i datasheet and its package drawings. Use the pin-description table when assigning HSIC signals, USB data lines, supplies, grounds, and exposed-pad connections. Do not infer pin functions from the package drawing alone, because exposed-pad and power-net connections must follow the manufacturer land-pattern instructions.
What is the difference between USB4640 and USB4640i?
USB4640 and USB4640i share the USB 2.0 hub, HSIC, and Flash-media-controller product family, while the available ordering results identify USB4640I-HZH-03 as a distinct controller variant. The manufacturer datasheet groups the two names for family documentation, so the exact firmware revision and host-media compatibility should be checked before treating one ordering code as interchangeable with another. The suffix 03 identifies the internal ROM firmware revision.
Is USB4640-HZH-03-TR suitable for portable and embedded USB systems?
USB4640-HZH-03-TR is suitable for compact embedded USB systems that need a 480 Mbps HSIC host connection and integrated Flash-media access. Microchip identifies cell phones, GPS equipment, PCs, printers, and set-top boxes as supported applications. Its integrated hub control, port monitoring, power-switch control, ESD protection, and overcurrent protection reduce the external circuitry required around the USB interfaces.
What can replace USB4640-HZH-03-TR?
The closest documented drop-in replacement is USB4640I-HZH-03-TR because it belongs to the same 48-QFN USB4640 family and shares the HSIC hub and Flash-media-controller architecture. Firmware behavior, supported media, downstream-port configuration, and host validation must still be checked before substitution. The USB4640-HZH-03 ordering code uses the same core device family but is not a separate tape-and-reel option suitable for footprint substitution.
Is USB4640I-HZH-03-TR the same as USB4640-HZH-03-TR?
USB4640I-HZH-03-TR and USB4640-HZH-03-TR are closely related Microchip USB4640 family members, but they are separate ordering codes. The shared 48-QFN package provides mechanical compatibility, while the I designation and 03 firmware suffix can affect the exact device configuration and host-media behavior. Use the manufacturer comparison information and application validation before declaring them functionally identical.
When should I choose USB4640-HZH-03-TR over USB4604-1080HN-TR?
Choose USB4640-HZH-03-TR when the design specifically requires the USB4640 combination of a 480 Mbps HSIC upstream interface, USB 2.0 hub control, and Flash media card reader functions. USB4604-1080HN-TR belongs to a different USB controller family, and the available comparison information does not establish a pin-to-pin-compatible 48-VFQFN replacement. Treat it as a design-family alternative requiring a new schematic and firmware review, not as a drop-in substitution.
How does USB4640-HZH-03-TR help protect USB ports?
USB4640-HZH-03-TR integrates ESD protection, overcurrent protection, port power-switch control, port status monitoring, and power-on reset. These functions help manage downstream USB connections and fault conditions while reducing the need for separate discrete protection and control circuitry. Exact current limits, protection response thresholds, and external component requirements must be confirmed from the manufacturer datasheet and application schematics.
How should the USB4640-HZH-03-TR exposed pad be handled on a PCB?
The USB4640-HZH-03-TR exposed pad should be connected according to the manufacturer package-land-pattern instructions and the net assigned in the datasheet pin table. Use a thermal via array within the pad region where the PCB design rules permit, and provide adequate top- and bottom-layer copper for heat conduction. Keep via stubs short and confirm that the pad connection does not conflict with the required internal ground or power structure.
Does USB4640-HZH-03-TR need an external Flash media controller?
No separate external Flash media controller is required for the Flash-reader function because the USB4640 integrates the media-card reader interface with USB hub control. The host still requires the appropriate driver, operating system support, media-format compatibility, and firmware configuration. The integrated function reduces board area, but it does not remove the need to validate each supported card type with the complete system.
Is USB4640-HZH-03-TR active and available for new designs?
Microchip Technology lists USB4640-HZH-03-TR as an active product and specifies a manufacturer lead time of four weeks. It is supplied in tape-and-reel packaging in a 48-VFQFN exposed-pad package. Current inventory and lot-specific availability can change, so use the Request a Quote form on this page to confirm current lead time, order quantity, and delivery details.
Where can I buy USB4640-HZH-03-TR online?
Use the Request a Quote form on this page to request USB4640-HZH-03-TR availability, current commercial terms, and lead time for the required quantity. The exact MPN is offered in tape-and-reel packaging as an active Microchip Technology device. Because market price and inventory change frequently, the quote form provides current purchasing information without presenting a stale static price.
What is the price of USB4640-HZH-03-TR?
The current commercial price of USB4640-HZH-03-TR depends on order quantity, required packaging, and market conditions. Submit the required quantity through the Request a Quote form on this page for a current quotation. The product is a 48-VFQFN tape-and-reel device with a manufacturer-stated four-week lead time, so quantity confirmation is important when scheduling production.
What is the lead time and stock status for USB4640-HZH-03-TR?
Microchip Technology lists a manufacturer lead time of four weeks for USB4640-HZH-03-TR and identifies the product status as active. Market stock can vary independently of that manufacturer lead time. Use the Request a Quote form on this page to confirm current stock, minimum order quantity, and a delivery schedule against the date required for your build.

נתוני עזר הנדסיים עבור USB4640-HZH-03-TR — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose USB4640-HZH-03-TR when an embedded system needs a 480 Mbps HSIC connection to a USB 2.0 hub controller with integrated Flash media reader support, managed port power, status monitoring, and integrated ESD and overcurrent protection. The 48-VFQFN exposed-pad package is appropriate for compact boards that can implement the prescribed thermal-via and decoupling layout. USB4640I-HZH-03-TR is the closest drop-in family option when the I-designated controller has passed the required host, media, and peripheral validation. USB4640I-HZH-03 can provide the same package and revision code, but the non-TR ordering suffix requires purchasing confirmation. USB4604-1080HN-TR is a different controller family and should not be treated as a pin-compatible replacement. For all USB4640 candidates, verify firmware behavior, supported media, downstream-port requirements, and thermal performance before production approval.

השוואה עם חלופות

פרמטר מוצר זה USB4640I-HZH-03-TR USB4640I-HZH-03
Package 48-VFQFN exposed pad (7 x 7 mm) 48-VFQFN exposed pad (7 x 7 mm) 48-VFQFN exposed pad (7 x 7 mm)
Brand Microchip Technology Microchip Technology Microchip Technology
Product Type USB 2.0 hub controller with Flash media card reader USB controller USB controller
Firmware Revision Code 03 03 03
Mounting Type Surface mount Surface mount Surface mount

מבדילים עיקריים

  • Combines USB hub control and Flash media access in one controller (לעומתUSB4604-1080HN-TR)
  • Uses a compact 7 x 7 mm exposed-pad package (לעומתUSB4640I-HZH-03-TR)
  • Revision 03 firmware ordering code (לעומתUSB4640I-HZH-03)

הערות תכנון

Use the manufacturer QFN land pattern exactly and inspect the exposed-pad net before routing. Place the required input, output, and internal-regulator decoupling capacitors close to their associated pins, with short ground returns. The HSIC and USB traces should avoid splits across power or ground planes, and test-point access should be arranged without disturbing the high-speed return paths.

The 48-VFQFN exposed pad must have a direct thermal path into the PCB. Use the recommended via pattern where space permits, keep the via array within the pad area, and provide uninterrupted copper on adjacent layers. Validate the final junction temperature against the highest expected ambient temperature and operating mode rather than relying on nominal package temperature ratings.

Treat HSIC and USB signal routing as a high-speed layout problem: use short, continuous traces, avoid right-angle transitions, maintain reference-plane continuity, and observe the manufacturer’s spacing and routing guidance. Place protection and support components away from the main data paths unless the application schematic explicitly requires a nearby topology. Review rise-time-sensitive connections with an oscilloscope after board assembly.

Do not select USB4640, USB4640i, or a particular firmware suffix solely from the package number. Validate host-driver support, card-format compatibility, downstream-port configuration, protection thresholds, and power sequencing as a complete system. Also confirm whether the required order code requires tape-and-reel packaging before placing a non-TR ordering option into the approved bill of materials.

מידע על תאימות

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Yes
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The Microchip USB4640 family documentation identifies a 48-pin lead-free QFN package and RoHS-compliant construction. REACH, AEC-Q100, halogen-free, and conflict-minerals status are not stated.

חיפושים קשורים

USB4640-HZH-03-TR datasheet USB4640-HZH-03-TR pinout USB4640-HZH-03-TR datasheet pdf USB4640-HZH-03-TR equivalent USB4640-HZH-03-TR replacement USB4640-HZH-03-TR cross reference USB4640-HZH-03-TR price USB4640-HZH-03-TR stock Microchip USB4640-HZH-03-TR USB4640-HZH-03-TR 48-VFQFN USB4640-HZH-03-TR USB 2.0 hub USB4640-HZH-03-TR HSIC 480 Mbps USB4640-HZH-03-TR set-top box USB4640-HZH-03-TR vs USB4604-1080HN-TR USB4640-HZH-03-TR application circuit

רכיבים ומונחים קשורים

Microchip Technology USB4640-HZH-03-TR USB4640 USB4640i USB4640I-HZH-03-TR USB4640I-HZH-03 USB4604-1080HN-TR USB 2.0 hub controller Flash media card reader Hi-Speed Inter-Chip HSIC USB interface controller semiconductor 48-VFQFN exposed pad QFN family surface mount 480 Mbps 1.8 V interface supply port power-switch control programmable signal drive ESD protection overcurrent protection power-on reset internal regulator RoHS
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר