Nuvoton Technology Corporation

W78E052C40PL - 40MHz 8051 MCU with 8KB Flash | Nuvoton

MPN: W78E052C40PL ✓ פעיל
5 V Vdss 44-LCC J-lead Package 40 MHz Speed 8 KB Flash EPROM Memory
כמות הזמנה מינימלית: 1 |

W78E052C40PL סקירה

The Nuvoton Technology Corporation W78E052C40PL is an 8-bit 8051-compatible microcontroller operating at up to 40 MHz, with 8 KB of Flash program memory and a 44-pin LCC J-lead package. It is designed for embedded control applications requiring a standard 8051 instruction set, multiple I/O ports, timers, a watchdog timer, and serial communication in a compact surface-mount package.

An 8051-compatible microcontroller is an embedded processing device whose instruction set follows the widely established Intel 8051 architecture. Within the product hierarchy, the W78E052C40PL is a microcontroller, an embedded IC, and a programmable semiconductor used to supervise sensors, control actuators, read inputs, and coordinate system behavior. Its compatibility with the standard 8051 instruction set simplifies migration of established control code and supports a broad collection of established toolchains and peripherals.

The device provides 8 KB of Flash EPROM for program storage and 256 bytes of RAM for working data. Its interface resources include four 8-bit bidirectional, bit-addressable I/O ports, an additional 4-bit P4 port, three 16-bit timer/counters, a hardware watchdog timer, and a serial port. The 40 MHz clock rating supports faster instruction execution than slower 8051-class devices while retaining the familiar programming model.

Internally, the W78E052C combines an 8-bit CPU core, on-chip program and data memory, parallel I/O, timing resources, and serial communication in one integrated device. The manufacturer describes the family as using advanced CMOS technology and operating from a 5 V supply. These characteristics make the controller appropriate for compact industrial controllers, embedded instrumentation, appliance control, data acquisition, and legacy 8051 peripheral designs.

Typical applications include temperature controllers, motor and valve supervisors, keypad interfaces, LED status panels, programmable timers, serial-connected sensors, and small automation modules. The 44-LCC J-lead package supports higher pin density than a conventional 28-pin DIP arrangement, while the Flash memory permits firmware updates without removable memory devices.

PCB design should preserve the manufacturer-recommended power, ground, clock, and decoupling connections, and the exposed board area around the J-lead package should accommodate soldering and cleaning requirements. Firmware should use the watchdog timer for recovery from stalled loops, while timer/counter resources should be allocated carefully when multiple timing functions must operate concurrently.

This product page consolidates the verified architecture, memory, timing, package, and interface characteristics of the W78E052C40PL with application guidance, engineering design notes, and transparent comparisons that help engineers evaluate whether this 8051-compatible controller fits an existing embedded platform.

חלופות תחליף ישיר עבור W78E052C40PL — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם W78E052C40PL (אותו גורם צורה וטביעת רגל) — שונים ב Mounting Type, Package.

Nuvoton Technology Corporation
Mounting Type: Surface Mount (PLCC socket or direct solder)
Package: 44-PLCC (PL)
השווה עם W78E052C40PL →

אין חלופות תואמות Drop-in עבור מוצר זה.

בקשת חלופות

W78E052C40PL דירוגים מרביים ומאפיינים חשמליים

Product Type 8-bit 8051-compatible flash microcontroller
תדר שעון מקסימלי 40 MHz
CPU Architecture 8051-compatible instruction set
Program Memory 8 KB Flash EPROM
Program Memory Organization 8K x 8 bytes
RAM 256 bytes
מתח אספקה 5 V
I/O Ports Four 8-bit bidirectional, bit-addressable ports
Additional I/O 4-bit P4 port
Timer/Counter Resources 3 x 16-bit timer/counters
Watchdog Timer Hardware watchdog timer
Serial Interface 1 serial port
Process Technology Advanced CMOS
מארז 44-LCC J-lead
סוג הרכבה Surface mount

מדריך תצורת פינים של W78E052C40PL 44-lcc j-lead

תצורת פינים עבור W78E052C40PL (מארזת 44-lcc j-lead). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 44-lcc j-lead עבור W78E052C40PL

אין נתוני פריסת פינים מפורטים עבור W78E052C40PL.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

W78E052C40PL מתאים עבור 6 יישוםs: Industrial Automation Controller, Temperature and Environmental Controller, Motor and Valve Supervisor, Appliance Control Panel, Serial Sensor Interface, Legacy 8051 Controller Migration.

🏭

Industrial Automation Controller

The W78E052C40PL fits compact automation modules that supervise digital equipment and retain an established 8051 firmware base. Its 40 MHz operating rate supports responsive control logic, while three 16-bit timer/counters can divide time among periodic tasks, input timing, and output events. Four 8-bit bidirectional ports plus the 4-bit P4 interface provide enough connectivity for status inputs, relay-command outputs, panel keys, and local indicators. The hardware watchdog improves recovery after a firmware stall, although industrial qualification requires separate review of environmental, isolation, and functional-safety requirements.

💊

Temperature and Environmental Controller

A compact temperature controller can use the W78E052C40PL to sample a sensor, apply control logic, and drive a display, alarm, fan, or heater relay. The 40 MHz clock allows the processor to service periodic measurements without a large performance penalty, and the three timer/counters are useful for sampling intervals, debounce timing, and actuator timing. Its 256 bytes of RAM demands disciplined variable allocation, while 8 KB of Flash accommodates a modest control program and lookup tables. For safety-critical thermal systems, add hardware cutoff independent of the main firmware.

🔧

Motor and Valve Supervisor

The W78E052C40PL is suitable for supervisory control of small motors, solenoids, and valves where a microcontroller handles command sequencing rather than directly performing high-power switching. Its parallel I/O can accept start, stop, and limit inputs while controlling discrete output stages, and its timer/counters can measure pulse width, duty cycle, or motion intervals. The 5 V supply operation supports conventional embedded logic. External transistor drivers, flyback protection, current sensing, and electrical isolation remain necessary where the controlled load exceeds direct I/O capability.

📺

Appliance Control Panel

In an appliance or equipment panel, the W78E052C40PL can scan a keypad, drive LED status indicators, manage operating modes, and report events through its serial port. Its four main 8-bit ports and additional 4-bit P4 port support matrixed keys, discrete indicators, and local control lines, while the 40 MHz rate provides ample margin for debounce and display updates. The Flash program memory allows field firmware to be changed without a removable memory component. A production design must budget 8 KB for code, interrupt handlers, calibration data, and upgrade routines.

🧩

Serial Sensor Interface

The W78E052C40PL can serve as the acquisition and control layer between sensors and a higher-level system. Its dedicated serial port supports communication with a sensor module or local host, while the timer/counters support precise sample timing and timeout handling. The 40 MHz processor leaves execution headroom for parsing data, filtering readings, and updating local outputs. Interface voltage levels, isolation, termination, and protocol timing must match the selected external device, and the limited 256-byte RAM should be considered when buffering incoming frames.

🖥️

Legacy 8051 Controller Migration

The W78E052C40PL is particularly useful when an established 8051 control product must move to a faster Flash-based implementation without abandoning its instruction-set model. The manufacturer states that the W78E052C instruction set is fully compatible with the standard 8051, which can simplify code migration and preserve peripheral-driver concepts. At 40 MHz, the device offers more execution margin than classic low-speed 8051 parts, and 8 KB of Flash replaces a simple EPROM programming workflow. Porting still requires checks for timer registers, interrupt priorities, memory addresses, and any legacy timing assumptions.

סיכום מוצרים מומלצים

W78E052C Base-device family reference for the same 8051 architecture בשימוש ב-: Industrial Automation Controller, Temperature and Environmental Controller, Motor and Valve Supervisor, Appliance Control Panel, Serial Sensor Interface, Legacy 8051 Controller Migration W78c32 Related W78-family microcontroller reference בשימוש ב-: Industrial Automation Controller, Motor and Valve Supervisor, Serial Sensor Interface, Legacy 8051 Controller Migration
What is the W78E052C40PL?
The W78E052C40PL is an 8-bit, 8051-compatible flash microcontroller with a maximum clock frequency of 40 MHz, 8 KB of program memory, 256 bytes of RAM, and a 44-LCC J-lead package. According to the Nuvoton W78E052C manufacturer datasheet, its instruction set is fully compatible with the standard 8051, making it suitable for embedded control, automation, instrumentation, and legacy controller upgrades that require the established architecture.
What are the key specifications of W78E052C40PL that engineers should know?
The principal W78E052C40PL specifications are a 40 MHz maximum operating frequency, 8 KB of Flash EPROM, 256 bytes of RAM, and a 5 V supply. The device also includes four 8-bit bidirectional I/O ports, a 4-bit P4 port, three 16-bit timer/counters, a hardware watchdog timer, and one serial port. These values are identified in the Nuvoton W78E052C manufacturer datasheet and define its performance and peripheral allocation.
Where to download the W78E052C40PL datasheet PDF?
The W78E052C40PL datasheet PDF is available through the Nuvoton W78E52C manufacturer-datasheet link listed on this page. It describes the 8-bit 8051-compatible core, 8 KB Flash EPROM, 256-byte RAM, I/O ports, timers, watchdog, serial port, package, and operating characteristics. Use the PDF pin-description and package drawings for PCB assignment rather than relying on generic PLCC diagrams.
Where can I find the W78E052C40PL pinout?
The W78E052C40PL pinout is documented in the W78E52C manufacturer datasheet under the pin-description and package-outline sections. The component is specified in a 44-LCC J-lead package, and its complete numbered signal assignment should be taken directly from those tables. Confirm the power, ground, reset, clock, programming, and I/O connections against the exact W78E052C40PL package drawing before laying out the PCB.
What can replace the W78E052C40PL?
A true drop-in replacement for the W78E052C40PL must match its 44-LCC J-lead footprint, pin assignment, 5 V supply, 40 MHz clock rating, 8 KB Flash organization, 256-byte RAM, and 8051-compatible peripheral configuration. No separate pin-compatible replacement MPN can be confirmed from the available technical records, so a substitution should not be selected solely from its clock speed or package name. Validate the complete pin and memory map before committing it to a design.
Is W78E052C40PL the same as the W78E052C?
The W78E052C40PL is a specific ordering configuration of the W78E052C family, while W78E052C alone identifies the base device family. The listed configuration is an 8-bit MCU rated for 40 MHz with 8 KB of Flash memory in a 44-LCC J-lead package. The manufacturer datasheet also uses W78E052C as the family designation, so package, speed, and ordering suffixes must be matched before treating one listing as interchangeable with another.
W78E052C40PL vs W78E052C — which should I select?
Select the full W78E052C40PL ordering code when the design specifically requires a 40 MHz device with 8 KB Flash in the 44-LCC J-lead package. Use W78E052C when it is being referenced only as the broader family designation during component search. For either code, the important decision is whether the exact speed grade, memory configuration, package, pinout, and electrical characteristics satisfy the PCB and firmware requirements.
When should I choose W78E052C40PL over a generic 8051 microcontroller?
Choose the W78E052C40PL when an existing 8051 firmware architecture must run on a 40 MHz, 5 V controller with 8 KB of Flash and 256 bytes of RAM. Its standard-compatible instruction set can reduce code-porting effort, while the timer/counters, watchdog, parallel I/O, and serial port cover common embedded-control needs. It is less suitable when a design needs substantially more memory, more RAM, low-power modes, or peripherals absent from this family.
Is W78E052C40PL suitable for industrial automation?
The W78E052C40PL can fit compact industrial automation blocks that require an established 8051 codebase, deterministic timer resources, digital I/O, and serial communication. Its 40 MHz clock, three 16-bit timer/counters, hardware watchdog, and 8 KB Flash support typical supervisory control tasks. Suitability still depends on the required I/O count, environmental ratings, isolation, communication electrical standard, and functional-safety requirements of the finished machine.
What is the memory configuration of W78E052C40PL?
The W78E052C40PL contains 8 KB of Flash EPROM organized as 8K x 8 bytes and 256 bytes of RAM. According to the Nuvoton W78E052C manufacturer datasheet, the Flash memory holds executable program data, while the RAM supports working variables and stack operations. An 8 KB program-memory ceiling must be checked against compiled code size, interrupt routines, boot functions, and any firmware-updating routine.
Does W78E052C40PL include timers, watchdog, and serial communication?
Yes, the W78E052C40PL includes three 16-bit timer/counters, a hardware watchdog timer, and one serial port. These resources allow the MCU to measure time, generate periodic events, recover from firmware stalls, and communicate with a host or peripheral controller. The manufacturer datasheet describes them as part of the integrated W78E052C architecture; interrupt priorities and timer modes should be checked for the final firmware design.
Where can I buy W78E052C40PL online?
Use the Request a Quote form on this page to request current availability, lead time, and ordering information for the W78E052C40PL. Quote requests help confirm the exact 44-LCC J-lead ordering configuration and current component condition before a production purchase. For design continuity, specify the full manufacturer part number W78E052C40PL and request traceability information appropriate to the required quality level.
What is the price of W78E052C40PL?
Current pricing for the W78E052C40PL is obtained through the Request a Quote form on this page. The quote can be matched to the exact 8-bit, 40 MHz, 8 KB Flash, 44-LCC J-lead configuration and the requested order quantity. This avoids confusion with base-family listings, different package markings, or legacy inventory that may not be electrically and mechanically equivalent.
What is the lead time for W78E052C40PL?
The current lead time for W78E052C40PL should be confirmed through the Request a Quote form on this page. Lead time can vary with manufacturer inventory, exact package configuration, order quantity, and quality requirements, so it should be obtained for the complete MPN rather than inferred from a generic W78E052C family listing. For production planning, request the manufacturing schedule together with available delivery dates.
Is W78E052C40PL in stock?
Current stock status for the W78E052C40PL is confirmed through the Request a Quote form on this page. Submit the exact MPN, required quantity, and quality or traceability requirements so the response reflects the correct 44-LCC J-lead device. Do not substitute a generic W78E052C identifier, because family-level availability does not establish inventory for this specific ordering code.
What is the best Nuvoton equivalent for W78E052C40PL?
The closest Nuvoton-supported equivalent is the W78E052C family itself when the required 40 MHz speed, 8 KB Flash, 256-byte RAM, 44-LCC package, and exact pin assignment are retained. No separately identified Nuvoton MPN can be confirmed as a pin-for-pin drop-in substitute from the available records. For production use, treat W78E052C40PL as the controlling ordering code unless Nuvoton publishes a formal replacement table for the specific package and grade.

נתוני עזר הנדסיים עבור W78E052C40PL — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the W78E052C40PL for a compact 8051-compatible controller that needs a 40 MHz operating rate, 8 KB of internal Flash, 256 bytes of RAM, parallel digital I/O, timers, serial communication, and a hardware watchdog. It is a practical choice when an established 8051 codebase can be retained or adapted with limited architectural change. The 44-LCC J-lead package supports dense surface-mount assemblies but requires package-specific PCB layout and assembly controls. Consider a different device when the application requires substantially more program memory, greater RAM, multiple dedicated serial ports, low-power operating modes, or a peripheral set not present in this family. Because no separate drop-in substitute can be confirmed, validate the exact ordering code, pin table, electrical limits, and lifecycle status before production release.

השוואה עם חלופות

פרמטר מוצר זה
Brand Nuvoton Technology Corporation
Package 44-LCC J-lead
CPU Architecture 8051-compatible 8-bit core
Maximum Clock Frequency 40 MHz
Program Memory 8 KB Flash EPROM (8K x 8)
RAM 256 bytes
Supply Voltage 5 V
I/O Resources Four 8-bit ports plus a 4-bit P4 port
Timer/Counters Three 16-bit timer/counters
Communication and Supervision One serial port and hardware watchdog timer

מבדילים עיקריים

  • Standard-compatible control architecture (לעומתGeneric 8-bit microcontrollers)
  • Integrated timing resources (לעומתSimpler microcontroller variants)
  • Hardware fault recovery (לעומתSystems relying only on software watchdogs)

הערות תכנון

Use the exact W78E52C datasheet footprint and pin table for the 44-LCC J-lead package. J-lead parts require careful pad-length selection, sufficient solderability, and adequate clearance beneath the package body. Place the decoupling capacitor close to the device power pins and route the ground return directly into the ground plane. Avoid relying on a generic PLCC drawing because lead pitch, pin numbering, and exposed pad requirements must match the exact manufacturer package drawing.

Treat the 8 KB Flash and 256-byte RAM as hard design constraints. Check the compiled image size, reserve stack space, and avoid large frame buffers or unbounded serial receive queues. Several routine service distributors incorrectly describe the device as a 40-pin part, while the listed device is a 44-LCC J-lead configuration; use the manufacturer pin description to prevent pad and firmware assumptions from being based on the wrong pin count.

Design the 5 V supply with appropriate local decoupling and verify that every connected peripheral shares compatible logic levels. The timer/counter blocks and serial interface can support time-sensitive operations, but their activity still contributes to dynamic supply demand. Route high-current output-driver returns away from sensitive input paths, and include bulk and high-frequency bypass capacitance according to the manufacturer application guidance after checking the final power-tree requirements.

Enable the hardware watchdog in production firmware and make its timeout longer than the longest legitimate task. The watchdog is valuable in unattended controllers because it can restart the processor after a stalled loop. Do not refresh it unconditionally in the main loop; refresh it only after confirmed progress so the watchdog can still detect a partial system failure. Validate watchdog behavior across startup, communication loss, and actuator-error conditions.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The W78E052C40PL product records do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these requirements from the manufacturer declaration applicable to the exact ordering code and production lot.

הנתונים אומתו בתאריך: 2026-11-11 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

W78E052C40PL datasheet W78E052C40PL pinout W78E052C40PL datasheet pdf W78E052C40PL specifications W78E052C40PL equivalent W78E052C40PL replacement W78E052C40PL cross reference W78E052C40PL price W78E052C40PL stock Nuvoton W78E052C40PL W78E052C40PL 40MHz 8KB flash W78E052C40PL 44-LCC W78E052C40PL 8051 controller W78E052C40PL vs W78E052C W78E052C40PL footprint

רכיבים ומונחים קשורים

Nuvoton Technology Corporation Winbond W78E052C40PL W78E052C W78c32 8051-compatible instruction set 8-bit microcontroller embedded microcontroller programmable semiconductor Flash EPROM RAM 40 MHz clock three 16-bit timer/counters hardware watchdog timer serial port four 8-bit I/O ports 4-bit P4 port 44-LCC J-lead package surface-mount package CMOS technology industrial automation temperature controller serial sensor interface legacy controller migration
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר