XC3S200A-4FG320I - 294912-Logic-Cell Spartan-3A FPGA | AMD
MPN: XC3S200A-4FG320I ✗ סוף ייצורXC3S200A-4FG320I סקירה
A field-programmable gate array, or FPGA, is a programmable-logic semiconductor whose digital functions are defined after fabrication. By combining configurable logic blocks, programmable interconnect, memory resources, and programmable I/O blocks, an FPGA replaces combinations of fixed-function logic devices with one reconfigurable integrated circuit. Within the product hierarchy, the XC3S200A is a Spartan-3A FPGA, a member of the Spartan family of programmable logic devices.
Key features include support for 26 I/O standards, a Device DNA serial number, enhanced MultiBoot operation with a watchdog timer, dual power-management modes, and Dynamic Input Delay for data-to-clock centering. These features make the device suitable for embedded control, communications, industrial automation, instrumentation, video processing, and general-purpose logic consolidation. The 248 user I/Os provide extensive connectivity to external controllers, memories, transceivers, sensors, and display or communication peripherals.
The Spartan-3A architecture supports parallel programmable logic and dedicated input and output resources. Dynamic Input Delay allows timing-driven delay adjustment on selected input paths, supporting precise capture of data relative to a clock. Device DNA provides a device-specific identifier useful for configuration control, asset identification, and production traceability. MultiBoot with watchdog monitoring helps FPGA-based products maintain known configuration behavior while enabling controlled startup transitions.
Typical applications include industrial controllers, data-acquisition systems, communications infrastructure, video-processing modules, embedded networking equipment, and compact control platforms. Its 320-ball FBGA package supports dense board routing and high I/O availability, but it requires careful escape-routing, power-plane, via, and assembly planning. The 320-ball land pattern also makes thermal management and PCB assembly quality important in space-constrained industrial equipment.
Designers should use the AMD DS529 family data sheet and the device-specific pinout information to assign power, ground, configuration, clock, and user I/O connections. Validate every power rail against the selected Spartan-3A device configuration, preserve the required decoupling topology, and route configuration signals according to the documented startup requirements. PCB redesign is necessary if the current design does not use the exact 320-ball FBGA footprint.
This product page combines the verified device identity, package characteristics, Spartan-3A feature set, sourcing guidance, comparison information, and practical implementation considerations. It also identifies where timing, pin-level, and lifecycle details must be confirmed against the authoritative family documentation before a new PCB or production release is approved.
חלופות תחליף ישיר עבור XC3S200A-4FG320I — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם XC3S200A-4FG320I (אותו גורם צורה וטביעת רגל) — שונים ב Device Type, Package, Temperature Grade, User I/O Count.
XC3S200A-4FGG320I
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
XC3S200A-4FG320C
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←XC3S200A-4FGG320C
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
XC3S200A-5FGG320I
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
XC3S200A-5FGG320C
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
XC3S200A-4FG320I דירוגים מרביים ומאפיינים חשמליים
| Device Type | Spartan-3A field-programmable gate array |
| Logic Cells | 294912 cells |
| Configurable Logic Blocks | 4032 CLBs |
| User I/O Count | 248 I/Os |
| I/O Standards Supported | 26 standards |
| Speed Grade | -4 |
| Temperature Grade | Industrial |
| מארז | 320-ball FBGA |
| Package Pin Count | 320 balls |
| Package Form | Square BGA |
| סוג הרכבה | Surface mount |
| Device DNA | Supported serial number |
| MultiBoot | Supported with watchdog timer |
| Power Management Modes | 2 modes |
| Dynamic Input Delay | Supported |
מדריך תצורת פינים של XC3S200A-4FG320I square bga
תצורת פינים עבור XC3S200A-4FG320I (מארזת square bga). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור XC3S200A-4FG320I.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
XC3S200A-4FG320I מתאים עבור 6 יישוםs: Industrial Automation Controllers, Data Acquisition and Instrumentation, Communications Interface Consolidation, Video and Image Processing Modules, Embedded Networking Equipment, Secure Embedded Platform Control.
Industrial Automation Controllers
The XC3S200A-4FG320I fits industrial automation controllers that combine sequencing, interlocks, signal conditioning, and communications in one compact programmable-logic device. Its 294,912 logic cells and 4,032 CLBs provide substantial capacity for control algorithms, while 248 user I/Os support machine inputs, outputs, encoders, and field-bus transceivers. The industrial suffix supports a product intended for extended industrial environments. For new machinery, the designer should still validate supply noise, thermal behavior, and lifecycle availability. The -4 speed grade also provides a defined basis for timing closure rather than relying on a newer device family with different power characteristics.
מומלץ
Data Acquisition and Instrumentation
The XC3S200A-4FG320I can implement acquisition front-end control, channel multiplexing, trigger logic, digital filtering, and data packing for measurement instruments. The 248 user I/Os allow multiple converters, sensors, latches, and communication devices to share a single programmable controller. Dynamic Input Delay is particularly useful when data must be positioned precisely relative to a sampling or capture clock. The 320-ball FBGA offers high connectivity in a compact board area, although multilayer routing and BGA assembly quality must be designed carefully. System engineers should use the family data sheet to validate timing margins and I/O-standard compatibility for every converter interface.
מומלץ
Communications Interface Consolidation
The XC3S200A-4FG320I is suitable for consolidating protocol converters, packetizers, framing logic, and interface isolation in communications equipment. Its 4,032 CLBs and 294,912 logic cells provide substantially more parallel processing capacity than a small fixed-function interface controller, while 248 user I/Os support parallel buses and multiple transceiver connections. Device DNA can support production identification and traceability, and MultiBoot can assist controlled configuration transitions in equipment with multiple boot images. Designers must still budget FPGA routing for simultaneous high-speed traffic and verify protocol timing against the selected -4 grade rather than assuming general-purpose software timing.
מומלץ
Video and Image Processing Modules
The XC3S200A-4FG320I can serve as the programmable core in compact video and image-processing modules requiring parallel pixel pipelines, control logic, and multiple interface connections. The device provides 294,912 logic cells, 4,032 CLBs, and 248 user I/Os, enabling substantial pipeline parallelism without a large processor-only implementation. Its programmable I/O can accommodate parallel or differential interfaces when the selected standards and pin assignments are compatible. The principal trade-off is routing complexity: high-fanout video paths, DDR-style interfaces, and BGA escape routes require careful partitioning to preserve timing margin on the -4 grade.
מומלץ
Embedded Networking Equipment
The XC3S200A-4FG320I is applicable to embedded network nodes, protocol gateways, and traffic-management products where packet processing must run deterministically alongside a host processor. Programmable logic can implement framing, filtering, buffering, and stream routing while the 248 user I/Os connect directly to transceivers and status interfaces. The industrial-grade designation supports equipment intended for factory, telecom, or infrastructure environments, while Device DNA provides a means of device-level identification. For an existing platform, the FPGA should be placed between the host processor and physical interfaces only after confirming clock domains, bandwidth, and configuration behavior in the finished board design.
מומלץ
Secure Embedded Platform Control
The XC3S200A-4FG320I can implement platform-control, asset-identification, and boot-management functions in equipment where programmable behavior and configuration control are important. Device DNA supplies a device-specific serial number, while the enhanced MultiBoot feature and watchdog timer support managed configuration transitions. The 248 I/Os leave room for storage, security controllers, status LEDs, and communications channels, and the 320-ball FBGA supports dense integration. Designers should protect configuration interfaces, validate unauthorized-access assumptions, and review the security capabilities of the mature Spartan-3A generation against current threat requirements before deployment.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור XC3S200A-4FG320I — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | XC3S200A-4FGG320I | XC3S200A-4FG320C | XC3S200A-4FGG320C | XC3S200A-5FGG320I | XC3S200A-5FGG320C |
|---|---|---|---|---|---|---|
| Package | 320-ball FBGA | 320-ball FBGA - same | 320-ball FBGA - same | 320-ball FBGA - same | 320-ball FBGA - same | 320-ball FBGA - same |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Family | Spartan-3A FPGA | Spartan-3A FPGA | Spartan-3A FPGA | Spartan-3A FPGA | Spartan-3A FPGA | Spartan-3A FPGA |
| Logic Cells | 294912 cells | 294912 cells | 294912 cells | 294912 cells | 294912 cells | 294912 cells |
| Configurable Logic Blocks | 4032 CLBs | 4032 CLBs | 4032 CLBs | 4032 CLBs | 4032 CLBs | 4032 CLBs |
| User I/O Count | 248 I/Os | 248 I/Os | 248 I/Os | 248 I/Os | 248 I/Os | 248 I/Os |
| Speed Grade | -4 | -4 - same | -4 - same | -4 - same | -5 - 25% faster | -5 - 25% faster |
| Temperature Grade | Industrial | Industrial - same | Commercial | Commercial | Industrial - same | Commercial |
| I/O Standards | 26 standards | 26 standards | 26 standards | 26 standards | 26 standards | 26 standards |
מבדילים עיקריים
- Matches the closest identified same-family resource configuration (לעומתXC3S200A-4FGG320I)
- Retains the industrial temperature position while offering a higher speed grade (לעומתXC3S200A-5FGG320I)
- Matches the original logic resources and package with an alternate ordering-code spelling (לעומתXC3S200A-4FGG320C)
הערות תכנון
Design the 320-ball FBGA footprint from the AMD package drawing rather than scaling a generic BGA library. Confirm ball pitch, pad and solder-mask definitions, component orientation, via-in-pad compatibility, and assembly process capability before schematic release. A footprint error can affect every one of the 320 connections even when the logical FPGA design is correct. Review the finished stackup with the assembler because X-ray inspection and hidden-joint criteria may affect acceptance of a high-density BGA assembly.
Plan the power tree for configuration, core, and I/O requirements defined in DS529, including tolerance, sequencing, startup current, and worst-case activity. Place decoupling capacitance at the supply and ground balls according to the manufacturer layout guidance, with short planes and via arrays connecting the BGA to the relevant power distribution network. Estimated: power dissipation cannot be calculated without the selected I/O standards, clock rate, utilization, and activity factor; size the regulator from those inputs plus the documented worst-case device current.
Partition clock, high-speed routing, and sensitive I/O before assigning logical functions. Account for the -4 timing grade, package flight time, board skew, and the selected I/O standard; Dynamic Input Delay should be configured only for pins and interfaces where the family data sheet permits it. Keep clocks away from noisy switching nodes, use controlled-impedance routing where required, and reserve test access for configuration and key buses. Re-run static timing analysis after final board parasitics are applied.
Do not treat the alternate FG320 and FGG320 ordering spellings as interchangeable without checking the package drawing and ordering table. Likewise, do not substitute a commercial-temperature suffix for the industrial-grade part or assume a -5 device preserves -4 timing and power characteristics. Before production, compare the complete ordering codes, verify the 320-ball footprint, review the pinout, and run configuration, boundary-scan, functional, and environmental tests on representative assembled boards.
מידע על תאימות
The industrial temperature suffix is not an automotive qualification. Obtain current RoHS, REACH, terminal-finish, and material declarations from AMD for the exact orderable MPN.