XC3S500E-4PQG208I - 500K Spartan-3E FPGA | Xilinx
MPN: XC3S500E-4PQG208I ✗ סוף ייצורXC3S500E-4PQG208I סקירה
An FPGA is a reconfigurable digital semiconductor in the semiconductor hierarchy, where an FPGA is a programmable logic device used to implement digital logic, control, interface, and signal-processing functions. Unlike a fixed-function application-specific integrated circuit, an FPGA allows its logic and interconnect configuration to be programmed after manufacture. The Spartan-3E family targets cost-sensitive designs requiring substantially more logic capacity than small programmable logic devices.
Key features of the XC3S500E-4PQG208I include 10,476 logic cells, 1,164 CLBs, 368,640 total RAM bits, 158 input pins, and 126 output pins. Its 208-terminal PQFP package uses a 0.5 mm pitch and measures approximately 30.5 mm by 30.5 mm with a 4.1 mm height. The operating supply range of 1.14 V to 1.26 V reflects the internally regulated core supply used by this 90 nm CMOS FPGA generation.
The device belongs to the Spartan-3E architecture and is specified in the AMD Spartan-3E FPGA Family Data Sheet DS312. Its configurable logic blocks support general-purpose combinational and sequential logic, while dedicated block RAM provides 18 Kbit storage per available RAM block according to the family architecture. The 158 input and 126 output pins support external interfaces, control buses, memory connections, and high-speed digital links implemented in the FPGA fabric.
Typical uses include industrial control systems, communications equipment, instrumentation, embedded data-acquisition equipment, and cost-sensitive digital signal-processing platforms. Its 10,476-cell capacity is suitable for multi-module control logic, protocol interfaces, state machines, and parallel data processing, provided the design accounts for routing, timing, I/O standards, and power-supply requirements of the Spartan-3E family.
When laying out the board, use the package-specific pinout and differential-pair rules in DS312 rather than assigning FPGA I/O solely by pin number. Decoupling, configuration interface access, clock routing, JTAG connectivity, and startup behavior are as important as the logic resource count. The PQFP package has substantial leads and requires careful solder-paste, reflow, and inspection planning.
This product page combines device specifications, same-package replacement options, application guidance, and engineering-focused comparison notes. It helps designers evaluate the XC3S500E-4PQG208I as a 500K-gate Spartan-3E FPGA for legacy, industrial, and embedded designs while preserving package and design-tool considerations.
חלופות תחליף ישיר עבור XC3S500E-4PQG208I — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם XC3S500E-4PQG208I (אותו גורם צורה וטביעת רגל) — שונים ב Device Type, Package Dimensions, Configurable Logic Blocks, Logic Cells, Operating Temperature.
XC3S500E-4PQG208C
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←XC3S500E-4PQ208I
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←XC3S500E-4PQ208IS1
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
XC3S500E-4PQG208CS1
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
XC3S500E-5PQG208C
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
XC3S500E-4PQG208I דירוגים מרביים ומאפיינים חשמליים
| Device Type | Spartan-3E Field Programmable Gate Array (FPGA) |
| Equivalent Logic Gates | 500,000 gates |
| Logic Cells | 10,476 cells |
| Configurable Logic Blocks | 1,164 CLBs |
| Total RAM | 368,640 bits |
| תדר שעון מקסימלי | 572 MHz |
| Supply Voltage Range | 1.14 V to 1.26 V |
| Input Pins | 158 inputs |
| Output Pins | 126 outputs |
| Total Terminals | 208 terminals |
| מארז | 208-PQFP |
| Package Dimensions | 30.5 mm x 30.5 mm |
| Package Height | 4.1 mm |
| Lead Pitch | 0.5 mm |
| Process Technology | 90 nm CMOS |
| Minimum Operating Temperature | -40°C |
| Maximum Operating Temperature | +100°C |
| Performance Grade | -4 speed grade |
| Lead-Free Status | Lead free |
מדריך תצורת פינים של XC3S500E-4PQG208I 4.1 mm
תצורת פינים עבור XC3S500E-4PQG208I (מארזת 4.1 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור XC3S500E-4PQG208I.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
XC3S500E-4PQG208I מתאים עבור 6 יישוםs: Industrial Control Systems, Communications Equipment, Data Acquisition Systems, Embedded Instrumentation, Audio and Signal Processing, Video and Display Control.
Industrial Control Systems
The XC3S500E-4PQG208I fits industrial controllers requiring deterministic programmable logic across a -40°C to +100°C operating range. Its 10,476 logic cells can implement motor sequencing, interlocks, timing functions, and multi-axis control logic, while 368,640 RAM bits support local buffers and state history. The 158-input and 126-output configuration provides substantial connectivity for sensors, encoders, actuators, and communications. Engineers should use DS312 for bank and I/O assignments, verify the selected external standards against the core supply, and preserve the 208-PQFP land pattern to avoid redesigning an existing qualified control board.
מומלץ
Communications Equipment
The XC3S500E-4PQG208I is appropriate for legacy communications equipment requiring flexible protocol handling, packet buffering, and parallel interface logic. Its 1,164 CLBs can support framing, error detection, flow control, and interface state machines, while block RAM can buffer data between modules. The device's listed 572 MHz maximum clock provides a substantial timing margin for many system-clock domains. For a new communications design, first confirm that the mature Spartan-3E device remains supported for the required lifecycle, then validate clock routing, I/O standards, and timing with the design tools specified for the installed ISE release.
מומלץ
Data Acquisition Systems
The XC3S500E-4PQG208I can act as the central digital controller in a parallel data-acquisition system. Its 10,476 logic cells are useful for sequencing converters, merging channels, calculating diagnostics, and formatting results, while 368,640 RAM bits provide on-chip capture and working storage. With 158 inputs and 126 outputs, the device can connect multiple converters and control signals without requiring a separate processor for every sampling stage. The critical design checks are converter data-rate timing, input threshold compatibility, clock jitter, and termination strategy; DS312 should be used for pin-specific input capacitance, clocking, and I/O guidance.
מומלץ
Embedded Instrumentation
The XC3S500E-4PQG208I supports compact embedded instrumentation that combines acquisition, calibration, trigger management, and communications in one programmable device. Its configurable logic fabric can implement calibration tables, trigger logic, digital filtering, and interface conversion, while block RAM can hold measurement records and intermediate results. The industrial temperature range makes it suitable for equipment expected to operate in variable ambient conditions. Designers should account for analog-to-digital converter latency, avoid routing timing-critical interfaces through general fabric without timing analysis, and verify that the 208-PQFP package fits the instrument's mechanical and thermal design.
מומלץ
Audio and Signal Processing
The XC3S500E-4PQG208I can implement parallel signal-processing pipelines, sample-rate conversion control, digital filters, and interface formatting for audio or industrial signal-processing equipment. The 1,164 CLBs provide parallel datapath resources, and 368,640 RAM bits are useful for delay lines, circular buffers, and coefficient storage. The device is particularly relevant when a legacy board must retain a proven PQFP footprint. For audio designs, separate analog and digital grounds according to the board guidance, control clock jitter carefully, and verify every external data interface for timing closure under the selected -4 speed grade.
מומלץ
Video and Display Control
The XC3S500E-4PQG208I can serve as the timing and control element in legacy video systems, including pixel timing, overlay generation, memory arbitration, and display-command processing. Its 10,476 logic cells provide sufficient parallel logic for multiple counters and interface state machines, while block RAM supports raster and line buffers. The design must be constrained for the intended pixel clock and supported memory interface, because fabric timing and memory bandwidth can become limiting factors before raw logic-cell count is exhausted. Use the manufacturer's 208-PQFP board and pin guidance, and confirm that the configuration and memory interfaces remain compatible with the chosen device revision.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור XC3S500E-4PQG208I — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | XC3S500E-4PQG208C | XC3S500E-4PQ208I | XC3S500E-4PQ208IS1 | XC3S500E-4PQG208CS1 | XC3S500E-5PQG208C |
|---|---|---|---|---|---|---|
| Brand | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx |
| Package | 208-PQFP | 208-PQFP - same | 208-PQFP - same | 208-PQFP - same | 208-PQFP - same | 208-PQFP - same |
| Logic Cells | 10,476 cells | 10,476 cells | 10,476 cells | 10,476 cells | 10,476 cells | 10,476 cells |
| Configurable Logic Blocks | 1,164 CLBs | 1,164 CLBs | 1,164 CLBs | 1,164 CLBs | 1,164 CLBs | 1,164 CLBs |
| Total RAM | 368,640 bits | 368,640 bits | 368,640 bits | 368,640 bits | 368,640 bits | 368,640 bits |
| Maximum Clock Frequency | 572 MHz | 572 MHz | 572 MHz | 572 MHz | 572 MHz | 715 MHz |
| Performance Grade | -4 | -4 | -4 | -4 | -4 | -5 |
| Operating Temperature | -40°C to +100°C | 0°C to +85°C | -40°C to +100°C | -40°C to +100°C | 0°C to +85°C | 0°C to +85°C |
| Input Pins | 158 inputs | 158 inputs | 158 inputs | 158 inputs | 158 inputs | 158 inputs |
| Supply Voltage Range | 1.14 V to 1.26 V | 1.14 V to 1.26 V | 1.14 V to 1.26 V | 1.14 V to 1.26 V | 1.14 V to 1.26 V | 1.14 V to 1.26 V |
מבדילים עיקריים
- Industrial-temperature operation in the same 208-PQFP footprint (לעומתXC3S500E-4PQG208C)
- Lower timing grade than the -5 same-package option (לעומתXC3S500E-5PQG208C)
- Industrial ordering code within an established Spartan-3E family (לעומתXC3S500E-4PQ208IS1)
הערות תכנון
Use the DS312 208-PQFP land pattern and pin-assignment table when laying out the board. The package has 208 leads on a 0.5 mm pitch, so pad geometry, solder-mask relief, and paste volume must be checked for the board's copper weight and assembly process. Preserve access to configuration, JTAG, clock-capable, and dedicated I/O pins; mechanically similar but incomplete pad layouts can prevent programming or impair signal integrity.
Design the core supply for the full 1.14 V to 1.26 V operating range and use the DS312 power-sequence and decoupling requirements. Place local high-frequency bypass capacitors next to the relevant supply pins and provide adequate startup and transient response for the selected I/O load. Because an FPGA can change current state during configuration, the regulator should not rely on a single operating point when sizing supply capacity.
Route clock and high-speed interface signals using the fanout, impedance, and topology guidance in DS312, and keep configuration and JTAG paths away from noisy switching nodes. I/O standards, drive strength, pull-up or pull-down values, and external termination must be selected per pin rather than applied uniformly across all 158 inputs and 126 outputs. Validate timing with the ISE version that supports the device and installed board constraints.
מידע על תאימות
The product listing identifies the XC3S500E-4PQG208I as lead-free. RoHS, REACH, halogen-free, and conflict-minerals status are not stated in the supplied technical information and are therefore not inferred.