XC5VLX30T-1FFG665C - 30,720-Cell Virtex-5 LXT FPGA | AMD
MPN: XC5VLX30T-1FFG665C ✓ פעילXC5VLX30T-1FFG665C סקירה
A field-programmable gate array is a semiconductor device whose digital logic, memory, and signal-processing resources are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, above complex programmable logic devices and alongside application-specific integrated circuits. Virtex-5 LXT devices combine configurable logic blocks, dedicated block RAM, DSP arithmetic resources, programmable I/O, and high-speed serial transceivers for communications and signal-processing systems.
The XC5VLX30T-1FFG665C provides 2,400 logic array blocks, or LABs, and 4,800 adaptive logic modules. Its 360 user I/O support communication interfaces, memory controllers, acquisition systems, and parallel data-processing architectures. The device also includes 1,327,104 bits of total RAM for packet buffering, line-rate interfaces, data alignment, and general-purpose digital storage. An internal-frequency figure of 1,098 MHz is listed for this device family and should be distinguished from the user-facing clock and interface performance of a specific design.
Its 65 nm CMOS construction belongs to the Virtex-5 generation, which combines programmable logic with integrated high-speed transceivers in the LXT family. Configuration programming establishes the circuit implemented in the LABs, DSP blocks, RAM, and I/O resources. Because the FPGA is highly parallel, its performance depends on clocking, routing congestion, memory bandwidth, transceiver configuration, and the quality of the board-level power and signal-integrity design rather than on clock frequency alone.
Typical uses include industrial control, telecom line cards, networking equipment, high-speed data acquisition, radar and signal-processing modules, test instrumentation, and embedded video systems. The broad I/O count and substantial logic capacity make the device suitable for designs that combine protocol handling, parallel processing, buffering, and multiple high-speed links on one FPGA.
PCB implementation must follow the AMD package pinout and layout guidance because the 665-pin FCBGA requires dense escape routing, controlled power delivery, and careful decoupling. Differential and high-speed interfaces also need length matching, controlled-impedance routing, and return-path planning. The exact pin assignments, configuration requirements, power rails, and recommended decoupling should be taken from the manufacturer package files and DS202 device data sheet.
This page combines the device architecture, package information, commercial sourcing path, alternative-ordering guidance, and practical comparison criteria. It helps engineers distinguish speed grades, temperature grades, package codes, and true footprint-compatible replacements before committing an existing PCB layout to a new part number.
חלופות תחליף ישיר עבור XC5VLX30T-1FFG665C — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם XC5VLX30T-1FFG665C (אותו גורם צורה וטביעת רגל) — שונים ב Package, Device Type, Process Technology, Logic Elements, Package Dimensions.
XC5VLX30T-1FF665C
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←XC5VLX30T-1FFG665I
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←XC5VLX30T-1FFG665IES
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
XC5VLX30T-1FF665I
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←XC5VLX30T-1FFV665C
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
XC5VLX30T-1FFG665C דירוגים מרביים ומאפיינים חשמליים
| FPGA Family | Virtex-5 LXT |
| Logic Elements | 30,720 cells |
| Logic Array Blocks | 2,400 LABs |
| Adaptive Logic Modules | 4,800 ALMs |
| User I/O | 360 pins |
| Total Block RAM | 1,327,104 bits |
| Process Technology | 65 nm CMOS |
| Core Supply Voltage | 0.95 V to 1.05 V |
| Nominal Supply Voltage | 1 V |
| טמפרטורת פעולה | 0°C to 85°C |
| מארז | 665-pin FCBGA, 27 mm × 27 mm |
| Total Device Pins | 665 pins |
| Internal Frequency | 1,098 MHz |
| Programmable Logic Type | FPGA |
מדריך תצורת פינים של XC5VLX30T-1FFG665C 665-pin fcbga, 27 mm × 27 mm
תצורת פינים עבור XC5VLX30T-1FFG665C (מארזת 665-pin fcbga, 27 mm × 27 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור XC5VLX30T-1FFG665C.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
XC5VLX30T-1FFG665C מתאים עבור 6 יישוםs: Industrial Control and Automation, Telecommunications Line Cards, High-Speed Data Acquisition, Radar and Digital Signal Processing, Networking and Packet Processing, Test and Measurement Instrumentation.
Industrial Control and Automation
The XC5VLX30T-1FFG665C fits industrial controllers that combine deterministic parallel logic with multiple communication and sensor interfaces. Its 30,720 logic elements and 4,800 adaptive logic modules provide capacity for sequencing, interlocks, motion-control logic, protocol conversion, and supervisory functions. The 360 user I/O simplify connections to sensors, actuators, encoders, and discrete industrial interfaces, while 1,327,104 bits of block RAM support command queues and diagnostic histories. The commercial 0°C to 85°C range suits controlled factory equipment. Engineers should partition timing-critical tasks deterministically, isolate high-current switching paths from the 0.95 V to 1.05 V FPGA core supply, and follow AMD package and decoupling guidance.
מומלץ
Telecommunications Line Cards
The XC5VLX30T-1FFG665C is appropriate for telecom line-card logic that must aggregate parallel traffic, perform framing, maintain packet buffers, and supervise multiple physical interfaces. Its large LAB count supports concurrent datapaths and protocol engines, while 1,327,104 bits of block RAM can support FIFOs, traffic shaping, and line-card buffering. The 360 user I/O are useful for parallel backplane, control, and status connections, and the LXT family architecture is intended for high-speed serial-interface designs. Actual line-rate qualification depends on transceiver configuration, reference-clock quality, board loss, and timing closure. Power sequencing, controlled-impedance routing, and package-ball escape design are critical in a dense 665-pin FCBGA implementation.
מומלץ
High-Speed Data Acquisition
The XC5VLX30T-1FFG665C can implement parallel-to-serial data pipelines, digital filters, channelizers, trigger logic, and acquisition control within one Virtex-5 LXT device. Its 30,720 logic elements support parallel processing stages, while 360 user I/O provide connections to ADC, DAC, memory, clock, and synchronization components. The 1,327,104-bit block-RAM capacity can be partitioned into acquisition FIFOs, sample buffers, or waveform tables. A practical design must maintain timing between data sources and the FPGA, use clocking resources according to the manufacturer data sheet, and account for package escape-routing delay. For high-speed analog interfaces, use short controlled-impedance paths, solid return planes, and separate analog and digital grounding strategies.
מומלץ
Radar and Digital Signal Processing
The XC5VLX30T-1FFG665C supports parallel digital signal-processing architectures such as radar front-end control, digital down-conversion, correlation, filtering, and beam-processing control. The Virtex-5 LXT architecture combines programmable logic with dedicated arithmetic resources and block RAM, allowing acquisition and processing pipelines to share one device. The 360 user I/O support parallel converter interfaces, while the configurable I/O blocks can be adapted to board-specific interface standards. Design teams should use the manufacturer resources to determine DSP and transceiver counts, then evaluate utilization and timing for the intended algorithm. High-speed clock distribution, deterministic routing, and thermal design of the 65 nm 665-pin FCBGA are as important as the nominal internal-frequency figure.
מומלץ
Networking and Packet Processing
The XC5VLX30T-1FFG665C is suited to network equipment requiring flexible protocol handling, high-throughput parallel logic, and dedicated buffering. The device's 30,720 logic elements can implement packet classifiers, header processing, queues, traffic managers, and control-plane logic, while 1,327,104 bits of block RAM support bounded FIFO and descriptor structures. Its 360 user I/O allow direct integration with parallel PHY, network-processing, and backplane-facing logic. The LXT family also supports high-speed serial connectivity when the relevant transceiver resources and clocking plan are selected. For production networking equipment, validate timing across every traffic class, provide lossless power sequencing, and use controlled-impedance routing with careful return-path continuity for high-speed links.
מומלץ
Test and Measurement Instrumentation
The XC5VLX30T-1FFG665C can implement programmable logic, pattern generation, acquisition pipelines, timing control, and instrument communication within a single Virtex-5 LXT device. Its 2,400 LABs and 360 user I/O allow multiple acquisition channels and sequencing engines to coexist, while block RAM can support sample buffering and calibration tables. The device is particularly useful where channel count, timing, and configuration flexibility make a fixed ASIC inefficient. Instrumentation designers should account for analog isolation, clock jitter, grounding, and trigger timing separately from FPGA logic timing. The 0°C to 85°C commercial range covers typical indoor laboratory environments, but the complete system still needs suitable airflow or a stable thermal design around the FCBGA.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור XC5VLX30T-1FFG665C — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | XC5VLX30T-1FF665C | XC5VLX30T-1FFG665I | XC5VLX30T-1FFG665IES | XC5VLX30T-1FF665I | XC5VLX30T-1FFV665C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 665-pin FCBGA, 27 mm × 27 mm | 665-pin FCBGA | 665-pin FCBGA | 665-pin FCBGA | 665-pin FCBGA | 665-pin FCBGA |
| FPGA Family | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT |
| Logic Elements | 30,720 cells | 30,720 cells | 30,720 cells | 30,720 cells | 30,720 cells | 30,720 cells |
| Logic Array Blocks | 2,400 LABs | 2,400 LABs | 2,400 LABs | 2,400 LABs | 2,400 LABs | 2,400 LABs |
| User I/O | 360 pins | 360 pins | 360 pins | 360 pins | 360 pins | 360 pins |
| Block RAM | 1,327,104 bits | 1,327,104 bits | 1,327,104 bits | 1,327,104 bits | 1,327,104 bits | 1,327,104 bits |
| Process Technology | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS |
| Speed Grade | -1 | -1 | -1 | -1 | -1 | -1 |
| Core Supply Voltage | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V |
מבדילים עיקריים
- Provides a documented industrial-temperature upgrade path (לעומתXC5VLX30T-1FF665C)
- Combines 360 user I/O with 1,327,104 bits of block RAM (לעומתXC5VLX30T-1FFV665C)
- Uses the -1 speed grade with 4,800 adaptive logic modules (לעומתXC5VLX50T-1FFG665C)
הערות תכנון
Use the AMD Virtex-5 package-device pinout files as the authoritative source for all 665 package balls and the PCB footprint. The XC5VLX30T-1FFG665C uses a dense 27 mm by 27 mm FCBGA, so escape-routing errors can affect power, ground, configuration, clock, and user I/O simultaneously. Confirm the package drawing, ball-pitch dimensions, pad stack, and board-stackup before releasing the layout; do not infer a 665-pin land pattern from a generic BGA symbol.
The core operates over 0.95 V to 1.05 V, so the power design must satisfy the manufacturer's sequencing and current requirements while preserving low-noise delivery to 360 user I/O and internal logic. Place the required decoupling capacitance at the relevant power balls with short, low-inductance connections, provide adequate plane or via-array distribution, and isolate switching supplies from sensitive analog circuitry. Verify steady-state and transient limits against the complete DS202 electrical specification and the finished-board power budget.
Plan clock and high-speed interface routing before placing the remaining logic. Use continuous reference planes, preserve return paths beneath high-speed nets, and match differential-pair geometry according to the board stackup and interface requirements. Keep the 1,098 MHz internal-frequency figure in perspective: it is a device-family parameter, not a promise that every user interface will close timing. Obtain post-route timing results and perform signal-integrity and power-integrity analysis on the production layout.
Do not treat an ordering-code variant as a drop-in device without checking its decoded speed grade, temperature grade, package code, and qualification suffix. The XC5VLX30T-1FF665C, XC5VLX30T-1FFG665I, XC5VLX30T-1FFG665IES, XC5VLX30T-1FF665I, and XC5VLX30T-1FFV665C are documented alternatives, but each may require different environmental, procurement, or marking conditions. Preserve the original bitstream compatibility only after confirming the exact device identifier and configuration behavior.
מידע על תאימות
No explicit material-compliance declarations for the exact ordering code were identified. Request current compliance documentation through XAIPART's Request a Quote form.