XC7A35T-L1CSG324I - 33,280-L Cell Artix-7 FPGA | Xilinx
MPN: XC7A35T-L1CSG324I ✓ פעילXC7A35T-L1CSG324I סקירה
An FPGA is a programmable semiconductor containing configurable logic blocks, programmable I/O, embedded memory, and digital signal processing resources. Instead of fixing a circuit in silicon, an Artix-7 device allows engineers to implement parallel datapaths, control logic, communication interfaces, and signal-processing functions that can be updated after deployment. Within the broader hierarchy, the Artix-7 family sits between general-purpose programmable logic and larger devices offering more resources and higher performance.
Key resources include 33,280 logic cells, 1,843,200 bits of block RAM, and 210 user I/O in the CSG324 package. The -1L grade targets lower-power operation compared with the standard -1 grade, while the 1 V core supply reflects the 28 nm Artix-7 architecture. The CSG324 package provides a compact surface-mount option for space-constrained embedded, communications, and industrial control systems.
The device architecture supports parallel logic implementation, block RAM for data buffering and packet storage, and dedicated DSP resources for filtering and arithmetic workflows. Because configuration is nonvolatile in the FPGA's dedicated configuration resources, designs can be loaded from external flash, a processor, or another configuration source. Exact resource counts for DSP slices, transceivers, and dedicated I/O blocks are not printed in the listing results and should be confirmed in the Artix-7 data sheet before final resource allocation.
Typical uses include industrial control systems, embedded sensor aggregation, audio and communications preprocessing, network-interface logic, prototyping platforms, and low-cost edge-processing equipment. The 210 I/O count supports external memory, serial transceivers, converters, LEDs, switches, and high-speed digital interfaces, while the small CSG324 footprint suits boards where connector area and routing density are constrained.
Design with the CSG324 package rather than a larger Artix-7 footprint, and verify the pinout, power rails, decoupling requirements, configuration pins, and exposed routing rules against the AMD package pinout files. A 324-pin BGA also demands careful escape routing, X-ray inspection, and thermal analysis during PCB qualification.
This page consolidates the verified device identifiers, package details, application guidance, and drop-in Artix-7 alternatives into one engineering reference. It also highlights the speed-grade and temperature-grade checks that determine whether a substitute can preserve the original design's timing, availability, and operating requirements.
חלופות תחליף ישיר עבור XC7A35T-L1CSG324I — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם XC7A35T-L1CSG324I (אותו גורם צורה וטביעת רגל) — שונים ב Block RAM, Logic Cells, Mounting Type, Package, Process Technology.
XC7A35T-1CSG324I
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
XC7A35T-2CSG324I
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
XC7A35T-1CSG324C
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←XC7A35T-2CSG324C
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
XC7A35T-1CSG324E
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
XC7A35T-L1CSG324I דירוגים מרביים ומאפיינים חשמליים
| Device Type | Artix-7 field-programmable gate array (FPGA) |
| Logic Cells | 33,280 cells |
| Block RAM | 1,843,200 bits |
| User I/O | 210 I/O |
| Process Technology | 28 nm |
| Core Supply Voltage | 1 V |
| Speed Grade | -1L |
| Temperature Grade | Industrial, -40°C to +100°C |
| מארז | 324-LFBGA, CSG324 |
| Package Type | Surface-mount BGA |
| סוג הרכבה | Surface Mount |
מדריך תצורת פינים של XC7A35T-L1CSG324I surface-mount bga
תצורת פינים עבור XC7A35T-L1CSG324I (מארזת surface-mount bga). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור XC7A35T-L1CSG324I.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
XC7A35T-L1CSG324I מתאים עבור 6 יישוםs: Industrial Control and Automation, Sensor Aggregation and Edge Processing, Communications Preprocessing, Audio and Digital Signal Conditioning, Network Interface and Storage Controller, Embedded Processor and Rapid Prototyping.
Industrial Control and Automation
The XC7A35T-L1CSG324I fits compact industrial controllers that coordinate sensors, actuators, interlocks, and communication logic. Its 33,280 logic cells provide parallel capacity for state machines, protocol handling, and safety monitoring, while 1,843,200 bits of block RAM support event buffering and local data storage. The 210 I/O in the CSG324 package leave room for digital inputs, encoder interfaces, isolated transceivers, and status indicators. The industrial -40°C to +100°C rating supports uncontrolled equipment enclosures, while the -1L grade is appropriate when power consumption matters as much as computational throughput. Verify every powered I/O against the selected voltage standards and design the BGA escape routing with inspection access in mind.
מומלץ
Sensor Aggregation and Edge Processing
Use the XC7A35T-L1CSG324I to aggregate outputs from multiple sensors and perform local filtering or feature extraction before transmitting results upstream. The 210 user I/O can accommodate parallel sensor channels and control signals, while block RAM provides deterministic buffering between acquisition and processing stages. Its 28 nm Artix-7 implementation combines logic density with a relatively low-power speed option for battery-assisted or thermally constrained equipment. The -1L grade is appropriate where the final design fits timing closure without a faster grade. Because the CSG324 package does not provide the dedicated transceiver access associated with larger Artix-7 packages, use external serial transceivers for long-distance or high-speed links and confirm those interfaces against the package pinout.
מומלץ
Communications Preprocessing
The XC7A35T-L1CSG324I can implement packet framing, header inspection, buffering, and control-plane logic for communications equipment. Its 1,843,200 bits of block RAM are useful for line-rate FIFO structures, while 33,280 logic cells support parallel classification or protocol conversion. The 210 I/O provide parallel interfaces to external PHYs, processors, and backplane transceivers. For designs operating from a regulated supply, the 1 V core rail and -1L low-power speed grade support a compact, thermally manageable implementation. Keep the high-speed physical layer outside the FPGA when the CSG324 package cannot expose dedicated transceiver resources, and use source-synchronous constraints and board-level timing margins that reflect the actual external PHY interface.
מומלץ
Audio and Digital Signal Conditioning
The XC7A35T-L1CSG324I is suitable for digital audio conditioning, sample-rate conversion support, mixing control, and programmable filtering. Its DSP resources and parallel logic fabric can execute multiple fixed-point channels, while block RAM stores sample and coefficient data. The 210-I/O CSG324 package also permits direct connection to external audio converters and digital interfaces, although exact I/O capabilities must be selected and verified per device speed grade. The -1L designation is useful in compact audio appliances where sustained processing power must remain moderate. Validate DSP arithmetic, clocking margins, and converter interface timing in hardware because resource counts alone do not establish signal-chain performance or latency.
מומלץ
Network Interface and Storage Controller
The XC7A35T-L1CSG324I can serve as a dedicated interface controller for external storage, configuration, or data-transfer subsystems. Block RAM supports command queues and data buffers, while the logic fabric implements state machines, CRC or parity functions, and device-command sequencing. With 210 I/O, the CSG324 package accommodates parallel buses and control signals without moving to a larger footprint. For designs needing more throughput, the XC7A35T-2CSG324I retains the package while offering a faster grade; otherwise the -1L version can reduce switching activity where the interface does not require maximum performance. Confirm memory-interface timing and bus-voltage requirements, and route sensitive signals away from noisy power and switching-converter regions on the PCB.
מומלץ
Embedded Processor and Rapid Prototyping
The XC7A35T-L1CSG324I is commonly used as the programmable fabric in embedded processor and prototyping platforms, combining a soft processor, memory controllers, peripherals, and application-specific logic in one device. Its 33,280 logic cells accommodate a substantial processor-based design, 1,843,200 bits of block RAM support instruction and data storage, and 210 I/O expose expansion buses and high-speed parallel interfaces. The CSG324 package is also used in common Artix-7 educational hardware, making it practical to reuse established board concepts. During hardware bring-up, confirm configuration signals, boot-mode strapping, JTAG access, and power sequencing against the exact CSG324 pinout before attaching external peripherals to prototype I/O banks.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור XC7A35T-L1CSG324I — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | XC7A35T-1CSG324I | XC7A35T-2CSG324I | XC7A35T-1CSG324C | XC7A35T-2CSG324C | XC7A35T-1CSG324E |
|---|---|---|---|---|---|---|
| Brand | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx |
| Package | 324-LFBGA, CSG324 | 324-LFBGA, CSG324 | 324-LFBGA, CSG324 | 324-LFBGA, CSG324 | 324-LFBGA, CSG324 | 324-LFBGA, CSG324 |
| Logic Cells | 33,280 cells | 33,280 cells | 33,280 cells | 33,280 cells | 33,280 cells | 33,280 cells |
| Block RAM | 1,843,200 bits | 1,843,200 bits | 1,843,200 bits | 1,843,200 bits | 1,843,200 bits | 1,843,200 bits |
| User I/O | 210 I/O | 210 I/O | 210 I/O | 210 I/O | 210 I/O | 210 I/O |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Core Supply Voltage | 1 V | 1 V | 1 V | 1 V | 1 V | 1 V |
| Speed Grade | -1L low-power grade | -1 standard grade | -2 standard grade | -1 standard grade | -2 standard grade | -1 standard grade |
| Temperature Grade | Industrial, -40°C to +100°C | Industrial, -40°C to +100°C | Industrial, -40°C to +100°C | Commercial temperature grade | Commercial temperature grade | Extended temperature grade |
מבדילים עיקריים
- Low-power speed option within the 33,280-cell Artix-7 family (לעומתXC7A35T-1CSG324I)
- Package-compatible upgrade path with higher performance (לעומתXC7A35T-2CSG324I)
- Industrial-temperature qualification for the target operating class (לעומתXC7A35T-1CSG324C)
הערות תכנון
Treat the CSG324 footprint as a high-density escape-routing problem rather than a conventional peripheral BGA. Follow the AMD package pinout files for every ball, including supply, ground, configuration, and reserved positions. Plan layer transitions for the 1 V core, I/O rails, decoupling, and JTAG or programming access before placing external circuitry. Validate the stack-up, via-in-pad strategy, solder-mask definition, and assembly process with the board fabricator.
Separate the low-noise core rail from clean I/O supplies and place their decoupling close to the corresponding device balls. The Artix-7 architecture uses a 1 V core supply, while external I/O banks may require additional rails. Use the family power guide to distinguish VCCINT, VCCAUX, and VCCO requirements, and verify sequencing and current limits for the exact -1L speed grade. Do not assume identical supply requirements between -1L, -1, and -2 alternatives.
A package-compatible substitute does not guarantee an equivalent lifecycle decision. The standard -1 and -2 CSG324 options differ from the target's -1L low-power grade in timing and power behavior, and commercial or extended temperature codes may not satisfy the original industrial requirement. Rerun implementation, static timing analysis, power estimation, and temperature-corner validation for the exact replacement ordering code before releasing it for production.
מידע על תאימות
The Artix-7 product documentation should be consulted for the exact ordering code's environmental, material, and automotive qualification statements. No additional compliance designation should be inferred from the family name alone.