XCKU040-3FFVA1156E - 20nm Kintex UltraScale FPGA | AMD
MPN: XCKU040-3FFVA1156E ✓ פעילXCKU040-3FFVA1156E סקירה
A field-programmable gate array is a programmable digital semiconductor whose configurable logic, interconnect, block RAM, DSP, and I/O resources can be programmed after manufacture. Within the semiconductor hierarchy, an FPGA is a programmable-logic device and a complementary alternative to an application-specific integrated circuit. The Kintex UltraScale family targets designs requiring substantial parallel processing, high-speed connectivity, and reconfigurable hardware in one device.
The XCKU040 combines 530,250 logic cells with 1,920 CLBs, giving engineers a large fabric for parallel algorithms, protocol handling, control logic, and data processing. Its 520 I/O sites support external connectivity, while the Kintex UltraScale architecture includes high-speed serial transceivers and dedicated DSP resources. These capabilities make the device suitable for demanding embedded systems that benefit from hardware parallelism or field-reconfigurable logic.
The 1156-pin FCBGA package provides a high pin count for power delivery, high-speed I/O, transceivers, and programmable logic. Package construction and ball pitch make board assembly more demanding than a leaded package: accurate CAD data, adequate thermal design, X-ray inspection, and careful reflow profiling are necessary for reliable assembly. The exposed package area also requires a PCB thermal strategy based on the device power dissipation and board construction.
Typical applications include high-throughput signal processing, industrial control and test equipment, communications infrastructure, machine-vision acceleration, scientific instrumentation, and embedded systems that require programmable logic. The combination of 741 MHz listed operation, 530,250 logic cells, and 520 I/O sites permits parallel data paths and high-speed external interfaces without designing a fixed-function ASIC.
When selecting this device, verify the complete ordering code against the FPGA datasheet, including speed grade, temperature class, package, and standard configuration. Do not substitute a different FPGA based only on approximate logic-cell count; pin assignments, power rails, configuration behavior, supported interfaces, and PCB land pattern must match exactly.
This page organizes the verified device identity, package information, drop-in ordering-code alternatives, comparison parameters, and application guidance. It supports faster engineering review while keeping the decisive electrical, mechanical, and firmware compatibility checks tied to the AMD Kintex UltraScale documentation.
חלופות תחליף ישיר עבור XCKU040-3FFVA1156E — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם XCKU040-3FFVA1156E (אותו גורם צורה וטביעת רגל) — שונים ב Speed Grade, Device Type, Package, Logic Cells, Package Type.
XCKU040-2FFVA1156E
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←XCKU040-1FFVA1156I
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←XCKU040-1FFVA1156C
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←XCKU040-FFVA1156
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
XCKU040-3FFVA1156I
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
XCKU040-3FFVA1156E דירוגים מרביים ומאפיינים חשמליים
| Product Type | Kintex UltraScale Field Programmable Gate Array |
| Process Technology | 20 nm |
| Logic Cells | 530,250 cells |
| Configurable Logic Blocks | 1,920 CLBs |
| Listed Maximum Frequency | 741 MHz |
| I/O Sites | 520 I/Os |
| Package Type | 1156-BBGA FCBGA |
| Package Pin Count | 1,156 pins |
| Package Ball Pitch | 1.0 mm |
| Speed Grade | -3 |
| Temperature Class Suffix | E |
| Series | Kintex UltraScale |
| סוג הרכבה | Surface Mount |
| Device Type | FPGA |
| Programmability | Field-programmable logic |
מדריך תצורת פינים של XCKU040-3FFVA1156E 1.0 mm
תצורת פינים עבור XCKU040-3FFVA1156E (מארזת 1.0 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור XCKU040-3FFVA1156E.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
XCKU040-3FFVA1156E מתאים עבור 6 יישוםs: Industrial Control and Automation, Communications and Network Infrastructure, Machine Vision and Image Processing, Scientific Instrumentation and Test Systems, Aerospace and Defense Systems, Server and Storage Data Processing.
Industrial Control and Automation
The XCKU040-3FFVA1156E is suitable for industrial controllers that combine deterministic parallel logic with numerous external I/O. Its 530,250 logic cells and 1,920 CLBs can host motion sequencing, safety interlocks, sensor conditioning logic, and communication protocols in parallel, while 520 I/O sites support field-bus and discrete interfaces. The -3 speed grade provides additional timing margin for demanding control paths when compared with lower-grade XCKU040 ordering codes. Designers should partition the fabric for deterministic latency, isolate clock domains carefully, and validate industrial EMC and temperature requirements on the completed board.
מומלץ
Communications and Network Infrastructure
The XCKU040-3FFVA1156E fits communications equipment requiring parallel packet handling, high-speed serial links, and programmable protocol logic. Its 530,250 logic cells can support traffic classification, queue management, timing, and monitoring functions, while the Kintex UltraScale transceiver resources support high-speed connectivity when the appropriate device pins and configuration are used. The listed 741 MHz operating frequency enables time-division multiplexing and datapath designs. Board-level compliance depends on the selected transceiver rate, reference clock, board material, and target EMC or network-equipment standard.
מומלץ
Machine Vision and Image Processing
The XCKU040-3FFVA1156E is a strong fit for machine-vision preprocessing because its 530,250 logic cells and 1,920 CLBs can run parallel pixel pipelines, feature extraction, thresholding, and frame-format conversion. The 520 I/O sites allow flexible connection to image sensors, memory, and high-speed capture interfaces, while the -3 grade supplies timing margin for clocked datapaths. Engineers should use pipeline registers between major stages, constrain all video clocks, and validate the chosen I/O standard against connector and cable-routing losses before production.
מומלץ
Scientific Instrumentation and Test Systems
The XCKU040-3FFVA1156E supports scientific instruments that combine acquisition control, calibration, timing, and real-time analysis. Its large programmable fabric can implement parallel filters, histogram processing, trigger logic, and interface adaptation, while 520 I/O sites support sensors, converters, clocks, and laboratory communication. The device's listed 741 MHz performance supports pipelined calculations, but exact throughput depends on the selected multipliers, block RAM, I/O standards, and clocking architecture. Designs should include deterministic reset handling, calibration storage, and remote firmware update mechanisms.
מומלץ
Aerospace and Defense Systems
The XCKU040-3FFVA1156E can support programmable logic in aerospace and defense systems when the selected ordering code, radiation qualification, and environmental requirements are verified for the exact mission profile. Its 530,250 logic cells and 1,920 CLBs permit parallel guidance, signal-processing, fault-monitoring, and communication functions, while 520 I/O sites provide flexible external connectivity. The E suffix does not by itself establish aerospace qualification, so procurement and engineering teams must review the applicable AMD documentation and qualification records. Radiation, temperature, vibration, and long-life supply requirements must be confirmed independently.
מומלץ
Server and Storage Data Processing
The XCKU040-3FFVA1156E is applicable to server-side and storage systems requiring reconfigurable compression, encryption, data filtering, or accelerator pipelines. Its 530,250 logic cells and 1,920 CLBs allow multiple parallel lanes to be implemented without fixed-function silicon, and the 520 I/O sites support high-volume movement between FPGA logic and external memory or networking components. The -3 speed grade provides additional timing margin over lower-speed alternatives. Power, thermal design, and memory-interface timing remain system-level constraints that should be evaluated with AMD power estimation and board-level signal-integrity analysis.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור XCKU040-3FFVA1156E — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | XCKU040-2FFVA1156E | XCKU040-1FFVA1156I | XCKU040-1FFVA1156C | XCKU040-FFVA1156 | XCKU040-3FFVA1156I |
|---|---|---|---|---|---|---|
| Package | 1156-BBGA FCBGA | 1156-BBGA FCBGA | 1156-BBGA FCBGA | 1156-BBGA FCBGA | 1156-BBGA FCBGA | 1156-BBGA FCBGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Series | Kintex UltraScale | Kintex UltraScale | Kintex UltraScale | Kintex UltraScale | Kintex UltraScale | Kintex UltraScale |
| Speed Grade | -3 | -2 | -1 | -1 | Ungraded | -3 |
מבדילים עיקריים
- Higher performance grade within the same XCKU040 package family (לעומתXCKU040-2FFVA1156E)
- Retains the -3 performance grade with a different temperature suffix (לעומתXCKU040-1FFVA1156I)
- Larger and more parallel implementation than lower-capacity FPGA families (לעומתXC7K325T-3FFG900E)
- High-density 1156-ball package supports extensive interface connectivity (לעומתXCKU040-1FBVA676I)
הערות תכנון
Build the power tree around every voltage rail specified for the exact XCKU040 ordering code, including core, auxiliary, I/O, and transceiver rails as applicable. Use AMD's device power guidance to estimate dynamic and static consumption at the actual clock rate, I/O activity, and utilization. Place bulk and high-frequency decoupling directly beneath the associated FCBGA balls, provide low-impedance power planes, and isolate noisy loads. Validate the design at maximum processing activity because utilization alone does not determine switching current.
Treat the 1156-BBGA thermal design as a system-level problem involving the FPGA, board copper, internal vias, heat spreader, enclosure, and ambient airflow. Estimate junction temperature with the applicable AMD power estimate and package model, then preserve margin over the required operating-temperature limit. Avoid relying on a nominal board thermal resistance. Confirm performance in a thermally representative enclosure using production-intent PCB stackup, component loading, and programmed device activity.
Use the official AMD UltraScale package-device pinout files for all ball assignments and land-pattern geometry. Pay particular attention to configuration pins, clock-capable pins, dedicated transceiver pins, reference clocks, and power balls. Review the package stackup, ball-pad dimensions, solder-mask definition, and assembly process with the PCB fabricator. A logically equivalent symbol is insufficient because one misplaced or incorrectly assigned ball can affect configuration, signal integrity, or thermal performance.
Constrain every external interface against the selected I/O standard and target edge rate, not merely the FPGA's nominal clock frequency. Use the appropriate IBIS or vendor model, controlled reference planes, suitable layer transitions, and length matching where the interface requires it. High-speed transceiver links also require a clean reference clock and carefully controlled power delivery. Perform pre-compliance and measurement testing on representative hardware rather than inferring compliance from FPGA resources alone.
Do not treat the -3 speed grade, E temperature suffix, or package family as interchangeable without checking the complete ordering code. The XCKU040-2FFVA1156E and lower-speed alternatives can retain the same package while changing timing behavior. Before substitution, review device configuration compatibility, pin functions, supported I/O standards, power requirements, and timing closure. Use AMD's published migration and ordering information, then regenerate the bitstream and repeat hardware validation.
מידע על תאימות
The exact RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 status of this ordering code must be confirmed from the manufacturer or its authorized documentation. The E suffix alone should not be interpreted as automotive qualification.