XCKU11P-1FFVD900E - Kintex UltraScale+ FPGA | AMD
MPN: XCKU11P-1FFVD900E ✓ פעילXCKU11P-1FFVD900E סקירה
An FPGA is a semiconductor whose digital logic is configured after manufacture. The FPGA hierarchy includes programmable logic arrays, look-up tables, flip-flops, routing fabric, dedicated memory, DSP arithmetic blocks, transceivers, and I/O resources. Compared with an application-specific integrated circuit, an FPGA allows designers to adapt interfaces, parallel processing, protocol handling, and hardware acceleration without changing the physical silicon.
The XCKU11P-1FFVD900E is identified in product listings as a 653,100-cell Kintex UltraScale+ device using a 900-BBGA FCBGA package. Its large logic and routing capacity supports parallel data processing, custom accelerators, protocol bridging, high-speed interface termination, and embedded control functions. The -1 ordering suffix denotes the device speed grade, while the final package, temperature, and qualification codes require validation against the applicable AMD ordering guide before a new PCB or production release.
UltraScale+ FPGAs combine programmable logic with DSP processing resources and serial transceiver capability. These resources allow high-throughput designs to combine parallel datapaths with high-speed serial links instead of separating those functions into multiple devices. Exact transceiver count, I/O count, memory totals, power ratings, and operating-temperature limits are not reproduced in the available product records and must be taken from the package-specific AMD device documentation.
Typical uses include PCIe-connected accelerator systems, industrial data acquisition, high-speed networking, test and measurement equipment, and defense or aerospace processing platforms. For these applications, the device is commonly configured through AMD Vivado or compatible programming tools, while the 900-BBGA footprint requires careful PCB escape routing, thermal analysis, and multilayer interconnect planning.
The principal design consideration is package complexity. A 900-BBGA device has a dense ball array that requires fine-pitch PCB design rules, via-in-pad or escape-routing strategies, controlled impedance, and effective heat removal. The exact pinout, power rails, decoupling requirements, and exposed thermal lands must be assigned directly from the AMD package pinout files.
This page combines the exact orderable identifier, package information, price evidence, comparison criteria, and practical integration guidance. It also distinguishes a documented same-package device from cross-architecture FPGA options that are not true drop-in replacements, helping engineers avoid treating broadly similar programmable logic devices as electrically or mechanically interchangeable.
חלופות תחליף ישיר עבור XCKU11P-1FFVD900E — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
XCKU11P-L1FFVD900I
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
XCKU11P-1FFVD900E דירוגים מרביים ומאפיינים חשמליים
| Device Type | Kintex UltraScale+ field-programmable gate array |
| Programmable Logic Cells | 653,100 cells |
| FPGA Family | Kintex UltraScale+ |
| Speed Grade | -1 |
| מארז | 900-BBGA FCBGA |
| Package Type | Ball grid array |
| Package Pin Count | 900 balls |
| סוג הרכבה | Surface mount |
| Programmable Logic | FPGA configurable digital logic |
מדריך תצורת פינים של XCKU11P-1FFVD900E 900 balls
תצורת פינים עבור XCKU11P-1FFVD900E (מארזת 900 balls). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור XCKU11P-1FFVD900E.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
XCKU11P-1FFVD900E מתאים עבור 6 יישוםs: PCIe Data-Processing Accelerator, Industrial Data Acquisition, High-Speed Network Interface, Test and Measurement Instrumentation, Communications Infrastructure, Aerospace and Defense Processing.
PCIe Data-Processing Accelerator
The XCKU11P-1FFVD900E fits high-throughput PCIe accelerator designs because its 653,100 programmable logic cells provide substantial parallel processing capacity while the Kintex UltraScale+ architecture integrates DSP, memory, I/O, and transceiver resources. A typical system places the FPGA beside a host processor and connects both endpoints through high-speed serial lanes. The parallel fabric can accelerate filtering, compression, encryption, or analytics while programmable interfaces support board-specific data movement. The engineering trade-off is package complexity: the 900-BBGA arrangement requires fine-pitch escape routing, strict power planning, and a thermal strategy capable of removing heat from both the device and high-activity transceiver regions.
מומלץ
Industrial Data Acquisition
The AMD XCKU11P-1FFVD900E is suitable for industrial acquisition systems that must combine many parallel sensor channels with real-time processing. Its 653,100 programmable logic cells can host timing control, channel multiplexing, digital filtering, protocol decoding, and data-packing functions instead of requiring separate programmable-logic devices. Designers can connect converters or sensors to the available I/O and use programmable resources to normalize data before it reaches a communications block. The -1 speed designation supports predictable implementation timing, while the large 900-BBGA footprint provides room for high-density board routing. Industrial implementations must additionally address isolation, grounding, environmental margins, thermal rise, and lifecycle continuity.
מומלץ
High-Speed Network Interface
The XCKU11P-1FFVD900E can serve as the central programmable device in a high-speed network interface that performs packet classification, buffering, protocol conversion, and traffic shaping. Its Kintex UltraScale+ architecture combines programmable logic with dedicated serial transceiver resources, allowing a design to balance fixed-rate connectivity with flexible packet processing. The 653,100-cell density gives parallel datapaths room to implement dual-port memories, look-up logic, and state machines. Practical implementation depends on the exact transceiver resources and pin assignments documented for the 900-BBGA configuration, so the board should be designed around the official package data rather than generic high-speed I/O counts.
מומלץ
Test and Measurement Instrumentation
For high-channel-count test and measurement equipment, the XCKU11P-1FFVD900E can combine acquisition control, pattern generation, real-time analysis, and communication logic in one FPGA. The 653,100 programmable logic cells allow multiple processing pipelines to operate concurrently while supporting deterministic control of test sequences and data capture. A practical instrument would route inputs through configurable logic blocks, perform digital filtering or correlation, and transfer results through high-speed serial links. The device's 900-BBGA package makes careful signal-integrity and thermal design essential because long parallel routes, dense power distribution, and externally referenced circuitry can create implementation or performance limits.
מומלץ
Communications Infrastructure
The XCKU11P-1FFVD900E fits communications infrastructure equipment that requires concurrent packet processing, low-latency data paths, and flexible hardware-supported interfaces. Its programmable resources can implement protocol adaptation, traffic management, encryption control, and monitoring functions while the UltraScale+ transceiver blocks support high-speed links. Designers can isolate functions into dedicated clocking regions and add buffers for timing closure, but they must verify lane availability, reference-clock topology, and pin assignments against the package-specific device tables. The 900-BBGA footprint also requires a multilayer PCB with disciplined return paths, power sequencing, and thermal-via arrays to preserve signal and power integrity.
מומלץ
Aerospace and Defense Processing
The XCKU11P-1FFVD900E can support aerospace, defense, and rugged embedded-processing architectures when the required qualification and environmental levels are verified for the exact ordering code. Its large programmable logic capacity supports concurrent control, signal conditioning, navigation-data processing, fault monitoring, and communication adaptation within one FPGA. Designers can implement redundancy or voting logic in programmable resources and isolate interfaces through the package ball assignments. Because the product records do not establish the temperature range or AEC-Q100 status, production use requires confirmation of the exact suffix and applicable qualification documentation. Board-level requirements should also address power transients, radiation considerations, vibration, and controlled thermal design.
מומלץ
נתוני עזר הנדסיים עבור XCKU11P-1FFVD900E — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | XCKU11P-L1FFVD900I |
|---|---|---|
| Package | 900-BBGA FCBGA | 900-BBGA FCBGA |
| Brand | AMD | AMD |
| FPGA Family | Kintex UltraScale+ | Kintex UltraScale+ |
| Speed Grade | -1 | -1 |
| Device Ordering Code | 1FFVD900E | L1FFVD900I |
| Architecture | UltraScale+ FPGA | UltraScale+ FPGA |
מבדילים עיקריים
- Exact orderable 900-ball configuration (לעומתXCKU11P-L1FFVD900I)
- Programmable-logic density for parallel datapaths (לעומתXCKU11P-L1FFVD900I)
- Pin-compatible family option with documented package identity (לעומתXCKU11P-L1FFVD900I)
הערות תכנון
Design the 900-BBGA land pattern directly from the AMD package drawing and pinout files. Confirm ball-pitch dimensions, component orientation, pad and solder-mask definitions, and via-in-pad allowances with the selected PCB fabricator. Use short escape paths and a continuous return plane beneath high-speed routes. A footprint assembled successfully on one supplier's process can still be unsuitable for another process, so the land pattern and assembly process must be reviewed together.
Partition the power tree according to the package-specific rail definitions rather than using a generic FPGA power architecture. Verify every supply voltage, sequencing requirement, current limit, and decoupling value against the AMD device documentation. Route high-current rails with short paths and adequate via arrays, keep switching-node copper away from sensitive inputs, and verify power sequencing across temperature and manufacturing tolerances before releasing the schematic.
Estimate worst-case junction temperature using actual FPGA activity, transceiver loading, ambient conditions, PCB copper, and enclosure airflow rather than a nominal logic-only power value. The 900-BBGA package benefits from a distributed thermal-via array beneath the device and low-impedance spreading paths between the die and board. Include nearby regulators, memory, and interfaces in the thermal simulation, and test the assembled board because connector loading and enclosure restrictions can change heat-flow conditions.
Use the package-specific pinout to place configuration, clock, transceiver, and ordinary I/O routes according to the AMD UltraScale+ pinout guidance. Preserve continuous reference planes, avoid stubs, control impedance variation, and follow the device's clock-input and power-sequence requirements. Validate high-speed channels with appropriate SI analysis and measurement; successful placement and routing in the design tool does not by itself guarantee compliant PCB-level behavior.
מידע על תאימות
The available product records identify the device, family, logic-cell count, speed designation, and package but do not establish the requested compliance attributes. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations using AMD documentation for the exact orderable MPN.