XMC1100T038F0064ABXUMA1 - 32MHz Cortex-M0 MCU | Infineon
MPN: XMC1100T038F0064ABXUMA1 ✓ פעילXMC1100T038F0064ABXUMA1 סקירה
A microcontroller is a programmable integrated circuit containing a processor core, nonvolatile program memory, data memory, peripherals and interface pins. The XMC1100 belongs to the hierarchy of 32-bit microcontroller → Arm Cortex-M0 processor → industrial embedded controller → semiconductor. Its 32 MHz Cortex-M0 core provides a deterministic low-complexity platform for embedded control, while the 64 KB Flash area stores application firmware and 16 KB of RAM supports working data and stack operations.
The XMC1100 family supports flexible port functions and alternate peripheral outputs mapped through the port pin configuration registers. According to the Infineon XMC1100 AB-Step datasheet, up to seven alternate output functions can be mapped to an individual port pin, with the selected module driving the output value and the port registers controlling pad characteristics within device limits. This flexibility allows designers to tailor pin usage for mixed-signal, communication and control functions.
The target device uses a single Arm Cortex-M0 core, a 32-bit CPU architecture and 64 KB of program Flash. Its ordering code also identifies industrial positioning, a 38-pin TSSOP package and tape-and-reel production packing. The combination of modest embedded resources and broad port multiplexing makes the device useful in compact controllers where a higher-performance processor, larger memory system or complex package would add unnecessary cost or board area.
Typical uses include industrial sensor controllers, building and automation modules, compact motor-control interfaces, low-speed communication equipment and general-purpose embedded-control boards. For communications designs, the selectable port functions can support assignment of peripheral outputs to shared pins, although the final interface implementation must follow the device pin-description table and reference manual. Firmware reuse between XMC1100 variants should account for differences in Flash size, peripheral availability and ordering code.
The primary hardware constraint is the PG-TSSOP-38-9 footprint. Because this exact package is not represented by the site's canonical pin-diagram library, the package illustration uses the default package image rather than an inferred drawing. Before routing a PCB, use the Infineon package drawing and pin-description table to preserve the exact lead numbering, exposed-pad requirements and recommended land pattern.
This page consolidates the exact ordering information, verified core and memory specifications, practical application guidance and a structured comparison with related XMC1100 devices. It also distinguishes confirmed production data from parameters that require the manufacturer datasheet, helping engineers assess device fit before beginning firmware and PCB implementation.
חלופות תחליף ישיר עבור XMC1100T038F0064ABXUMA1 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
XMC1100T038X0064ABXUMA1
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
XMC1100T038F0032AAXUMA1
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
XMC1100T038F0032ABXUMA1
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
XMC1100T038X0032AAXUMA1
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
XMC1100T038X0032ABXUMA1
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
XMC1100T038F0064ABXUMA1 דירוגים מרביים ומאפיינים חשמליים
| Product Type | 32-bit industrial microcontroller |
| Product Series | XMC1000 |
| Processor Core | Arm Cortex-M0 |
| CPU Architecture | 32-bit single-core |
| תדר שעון מקסימלי | 32 MHz |
| Program Memory | 64 KB Flash |
| Flash Organization | 64K x 8 bits |
| RAM | 16 KB |
| מארז | PG-TSSOP-38-9 |
| מספר פינים | 38 pins |
| סוג הרכבה | Surface mount |
| Industrial Positioning | Industrial |
| Alternate Port Output Functions | Up to 7 functions per port pin |
| Production Packing | Tape and reel |
| Moisture Sensitivity Level | MSL 3 |
| Halogen-Free Status | Yes |
מדריך תצורת פינים של XMC1100T038F0064ABXUMA1 pg-tssop-38-9
תצורת פינים עבור XMC1100T038F0064ABXUMA1 (מארזת pg-tssop-38-9). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור XMC1100T038F0064ABXUMA1.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
XMC1100T038F0064ABXUMA1 מתאים עבור 6 יישוםs: Industrial Sensor Controller, Building Automation Module, Compact Motor-Control Interface, Communication Equipment, Smart Sensor Node, General-Purpose Embedded Control.
Industrial Sensor Controller
The XMC1100T038F0064ABXUMA1 fits compact industrial sensor controllers that require deterministic 32-bit processing without a large embedded memory system. Its 32 MHz Arm Cortex-M0 core handles acquisition sequencing, filtering, threshold evaluation and communication tasks, while 64 KB of Flash provides more application-code headroom than a 32 KB XMC1100 derivative. The 16 KB RAM supports working buffers and stack operations. Its flexible port functions, including up to seven selectable alternate outputs per pin, help integrate sensors and status indicators efficiently. The 38-pin TSSOP package also keeps the controller compact for distributed equipment.
מומלץ
Building Automation Module
The XMC1100T038F0064ABXUMA1 is suitable for building-automation modules that coordinate inputs, outputs and low-speed field interfaces. At 32 MHz, the Cortex-M0 core can run state-machine logic, debouncing, timers and communication protocols concurrently within practical embedded constraints. The 64 KB Flash capacity is valuable when the firmware includes logging, configuration handling and field-upgrade support, while 16 KB of RAM accommodates packet and configuration buffers. Alternate port functions allow peripheral outputs to be assigned to shared pins, although each alternate function must remain within the electrical limits specified for the selected port pad.
מומלץ
Compact Motor-Control Interface
The XMC1100T038F0064ABXUMA1 can serve as the supervisory controller in a compact motor-control or actuator interface. Its 32 MHz Arm Cortex-M0 performance supports control sequencing, fault handling, communication and diagnostics, while the 64 KB Flash budget permits a more complete control program than the 32 KB variants. Timer and port resources are configured through the XMC1100 peripheral architecture, so the design must map each required signal to a legal pin and verify operating limits in the manufacturer datasheet. The TSSOP-38 package supports compact multi-layer boards while exposing a substantial number of I/O options.
מומלץ
Communication Equipment
The XMC1100T038F0064ABXUMA1 fits low-to-medium-speed communication equipment where a dedicated higher-end processor would be unnecessary. The 32-bit Cortex-M0 core can manage framed protocols, address handling, timeout logic and supervisory tasks, while 64 KB of Flash stores protocol handlers, configuration and diagnostic routines. Alternate output mappings can support communication peripherals on shared port pins, but the exact peripheral availability and pin multiplexing must be checked against the selected derivative in Infineon's ordering table. The 16 KB RAM provides useful protocol and packet-buffer capacity without requiring external memory in suitably bounded designs.
מומלץ
Smart Sensor Node
The XMC1100T038F0064ABXUMA1 is appropriate for a compact smart-sensor node that combines sensing, local processing and network-interface control. Its 32 MHz Cortex-M0 core can execute sampling schedules, calibration logic, filtering and event handling, while 64 KB of Flash leaves room for application firmware and communication code. The 16 KB RAM is suitable for bounded working sets and short message buffers. Flexible alternate port functions reduce pin-assignment pressure in space-constrained sensor assemblies. Because smart nodes may be battery powered, final power consumption must be evaluated using the operating modes and current specifications in the manufacturer datasheet rather than inferred from clock speed.
מומלץ
General-Purpose Embedded Control
The XMC1100T038F0064ABXUMA1 serves as a general-purpose embedded controller for products combining digital inputs, outputs, timers and serial functions. Its Arm Cortex-M0 architecture provides a 32-bit instruction set and up to 32 MHz operation, while 64 KB of Flash and 16 KB of RAM balance firmware capacity against package cost. Up to seven alternate output functions can be assigned to a port pin, enabling efficient allocation when several peripherals share external resources. The device is especially useful for cost-sensitive products that need more capability than an 8-bit controller but do not justify a high-performance Cortex-M core or external memory interface.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור XMC1100T038F0064ABXUMA1 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | XMC1100T038X0064ABXUMA1 | XMC1100T038F0032AAXUMA1 | XMC1100T038F0032ABXUMA1 | XMC1100T038X0032AAXUMA1 | XMC1100T038X0032ABXUMA1 |
|---|---|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | PG-TSSOP-38-9 | PG-TSSOP-38-9 | PG-TSSOP-38-9 | PG-TSSOP-38-9 | PG-TSSOP-38-9 | PG-TSSOP-38-9 |
| Processor Core | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M0 |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 64 KB | 64 KB | 32 KB | 32 KB | 32 KB | 32 KB |
| CPU Architecture | 32-bit single-core | 32-bit single-core | 32-bit single-core | 32-bit single-core | 32-bit single-core | 32-bit single-core |
| Product Series | XMC1000 | XMC1100 | XMC1100 | XMC1100 | XMC1100 | XMC1100 |
| Alternate Port Output Functions | Up to 7 per port pin | Up to 7 per port pin | Up to 7 per port pin | Up to 7 per port pin | Up to 7 per port pin | Up to 7 per port pin |
מבדילים עיקריים
- Twice the program memory of the 32 KB XMC1100 alternatives (לעומתXMC1100T038F0032AAXUMA1)
- Directly related 64 KB ordering variant for footprint reuse (לעומתXMC1100T038X0064ABXUMA1)
- Substantial RAM for compact embedded-control tasks (לעומתXMC1100T038F0032AAXUMA1)
הערות תכנון
Base the footprint on the official Infineon PG-TSSOP-38-9 package drawing rather than a generic TSSOP outline. Confirm lead pitch, overall span, pin-1 orientation and exposed-pad geometry against the manufacturer land-pattern guidance. Preserve the package thermal and soldering recommendations, and route sensitive or high-current nets away from the exposed-pad area when their requirements differ.
Assign external signals using the XMC1100 pin-description table and the port input/output configuration registers. Up to seven alternate functions can be mapped to a port pin, but alternate routing is not automatically interchangeable between derivatives. Verify that each selected function is present in the exact ordering code, that pad electrical limits are acceptable and that the pin remains usable in the intended package configuration before finalizing the schematic.
Decouple the device according to the manufacturer reference circuit, placing the required capacitors close to their designated supply and ground pins. Keep the power-loop footprint small and provide adequate return paths beneath the device. Do not infer permissible supply voltage, decoupling capacitance or startup behavior from the 32 MHz clock rating; validate these values against the electrical-characteristics section of the XMC1100 AB-Step datasheet.
Do not treat related XMC1100 ordering codes as automatically interchangeable. The F0032 variants have 32 KB rather than 64 KB of Flash, which can break the linker memory map, constrain firmware growth and change update assumptions. Other suffix changes may identify a different device step or derivative. Before replacement, compare the complete ordering designation, errata, pin functions, clock limits, exposed-pad requirements and peripheral availability.
מידע על תאימות
The related-device record identifies the production packing as MSL 3 and halogen-free. The XMC1100T038F0064ABXUMA1 is positioned as an industrial microcontroller, but no AEC-Q100 qualification is stated for this exact ordering designation. Other compliance claims require confirmation from the manufacturer product documentation.