Infineon

XMC1301Q040F0032ABXUMA1 - 32MHz Cortex-M0 Industrial MCU

MPN: XMC1301Q040F0032ABXUMA1 ✓ פעיל
1.8 V to 5.5 V Vdss PG-VQFN-40-13, 40 terminals Package 32 MHz Speed 32 KB (32K x 8) Memory
כמות הזמנה מינימלית: 1 |

XMC1301Q040F0032ABXUMA1 סקירה

Infineon Technologies XMC1301Q040F0032ABXUMA1 is a 32-bit ARM Cortex-M0 industrial microcontroller with a 32 MHz operating frequency, 32 KB of flash memory, 16 KB of SRAM, and 35 I/O lines in a 40-pin PG-VQFN-13 package. It operates from 1.8 V to 5.5 V, supports 3.3 V and 5 V systems, and includes an integrated analog-to-digital converter for embedded control applications.

A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, volatile data memory, peripherals, and I/O in one device. The ARM Cortex-M0 core uses a compact 32-bit RISC architecture designed for cost-sensitive embedded control. Within the product hierarchy, the XMC1301 belongs to the XMC1000 family of Cortex-M0 microcontrollers, combining general-purpose digital control with mixed-signal sensing functions.

The XMC1301Q040F0032ABXUMA1 provides 32,768 bytes of flash for firmware and 16,384 bytes of SRAM for working data. Its 35 I/O lines support digital interfaces, timers, and control outputs. The integrated ADC adds analog measurement capability without requiring a separate converter. Operation across a 1.8 V to 5.5 V supply range provides flexibility for industrial control, power conversion, sensor acquisition, and low-cost embedded equipment.

At its stated 32 MHz maximum operating frequency, the Cortex-M0 core provides a practical balance between processing throughput, power consumption, and design simplicity. The industrial ordering designation identifies the device as intended for industrial temperature operation from -40°C to +85°C. Its compact 40-pin VQFN package also includes an exposed pad, requiring careful PCB layout and adequate thermal copper for reliable heat dissipation.

Typical uses include digital power conversion, motor and actuator control, industrial sensor interfaces, compact PLC functions, consumer equipment, and general embedded control. The ADC, timer resources, and GPIO complement one another in designs that must acquire analog measurements, execute control laws, and drive external circuitry from a single controller.

The most important PCB consideration is the exposed thermal pad beneath the VQFN package. Place the device according to the Infineon PG-VQFN-40-13 land pattern, connect the exposed pad to the ground plane, and use short power and ground connections. Confirm that the regulator, crystal or clock components, decoupling capacitors, and programming interface meet the voltage and timing requirements in the manufacturer datasheet.

This product page combines core XMC1301 specifications, package and ordering information, practical PCB guidance, same-family drop-in options, and application-focused design context. It is intended to help engineers evaluate the XMC1301Q040F0032ABXUMA1 quickly before completing schematic, footprint, firmware, and qualification checks.

חלופות תחליף ישיר עבור XMC1301Q040F0032ABXUMA1 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

XMC1301Q040F0016ABXUMA1

✅ Drop-In
📦 PG-VQFN-40-13
Flash memory is 16 KB versus 32 KB, a 50% reduction; core speed and package family match

📋 חלופה להתייחסות (לא בקטלוג)

XMC1301-Q040F0008-AB

✅ Drop-In
📦 PG-VQFN-40-13
Flash memory is 8 KB versus 32 KB, a 75% reduction; operating speed remains 32 MHz

📋 חלופה להתייחסות (לא בקטלוג)

XMC1301-Q040F0016-AB

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 PG-VQFN-40-13
Flash memory is 16 KB versus 32 KB, a 50% reduction; same 32 MHz Cortex-M0 family

📋 חלופה להתייחסות (לא בקטלוג)

XMC1302Q040X0200ABXUMA1

✅ Drop-In
📦 PG-VQFN-40-13
Flash memory is 20 KB versus 32 KB, a 37.5% reduction; XMC1302 adds different mixed-signal resources

📋 חלופה להתייחסות (לא בקטלוג)

XMC1301-Q040F0032-AB

✅ Drop-In
📦 PG-VQFN-40-13
Electrical configuration is identical; ordering code omits the full tape-and-reel suffix

📋 חלופה להתייחסות (לא בקטלוג)

XMC1301Q040F0032ABXUMA1 דירוגים מרביים ומאפיינים חשמליים

Product Type 32-bit industrial ARM Cortex-M0 microcontroller
Processor Core ARM Cortex-M0, 32-bit RISC
Maximum Operating Frequency 32 MHz
Flash Memory 32 KB (32K x 8)
SRAM 16 KB
Program Memory 32,768 words
Operating Supply Voltage Range 1.8 V to 5.5 V
Nominal Supply Voltage 3.3 V
Supported Supply Levels 3.3 V and 5 V
I/O Lines 35 lines
Analog-to-Digital Converter 1 integrated ADC
טווח טמפרטורת פעולה -40°C to +85°C
מארז PG-VQFN-40-13, 40 terminals
Package Mounting Surface mount
Order Code XMC1301-Q040F0032-AB
Full Ordering Code XMC1301Q040F0032ABXUMA1
Shipping Package Tape and reel

מדריך תצורת פינים של XMC1301Q040F0032ABXUMA1 tape and reel

תצורת פינים עבור XMC1301Q040F0032ABXUMA1 (מארזת tape and reel). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת tape and reel עבור XMC1301Q040F0032ABXUMA1

אין נתוני פריסת פינים מפורטים עבור XMC1301Q040F0032ABXUMA1.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

XMC1301Q040F0032ABXUMA1 מתאים עבור 6 יישוםs: Digital Power Conversion, Industrial Sensor Acquisition, Motor and Actuator Control, Embedded PLC and Automation, Consumer and Household Equipment, Battery-Powered Monitoring Node.

⚡

Digital Power Conversion

The XMC1301Q040F0032ABXUMA1 fits digital power controllers that need deterministic control, firmware storage, and analog feedback in one package. Its 32 MHz ARM Cortex-M0 core can execute compensation loops and supervisory logic, while 32 KB of flash accommodates control code, parameter tables, and communication routines. The integrated ADC supports sensing of output voltage, current, or temperature, while 35 I/O lines control switches, indicators, and protection signals. Compared with a simple fixed-function controller, the programmable XMC1301 permits compensation, fault handling, and product-specific behavior to be updated without changing hardware.

🏭

Industrial Sensor Acquisition

The XMC1301Q040F0032ABXUMA1 is suitable for compact sensor nodes that combine analog measurement with local filtering, thresholding, and data output. Its integrated ADC reduces the need for a separate conversion IC, while 16 KB of SRAM provides working space for calibration parameters and sampled data. The 32 MHz core supports responsive acquisition and communication routines without imposing the cost of a higher-performance Cortex-M core. Its 1.8 V to 5.5 V operating range also allows the same controller architecture to serve low-voltage sensors and conventional industrial signal-conditioning modules.

🔧

Motor and Actuator Control

The XMC1301Q040F0032ABXUMA1 can serve as the central controller in small motors, valves, relays, and actuator modules requiring several digital control outputs. Its 35 I/O lines provide flexibility for pulse-width modulation, direction signals, switch inputs, and status indicators, while the integrated ADC enables current or position feedback. At up to 32 MHz, the Cortex-M0 processor is appropriate for deterministic control loops and basic fieldbus or serial protocols. Firmware can implement soft-start, current limiting, fault diagnostics, and configurable motion profiles within the available 32 KB program memory.

🏭

Embedded PLC and Automation

The XMC1301Q040F0032ABXUMA1 is appropriate for small distributed automation modules where a compact controller must read inputs, execute sequences, and drive outputs. Thirty-two kilobytes of flash allows inclusion of communication stacks, diagnostics, and configurable control sequences, while 16 KB of SRAM supports state tracking and data buffering. Its industrial temperature designation of -40°C to +85°C supports controlled factory environments, and the wide 1.8 V to 5.5 V supply range simplifies interface planning across mixed industrial equipment. Pin assignment and peripheral mapping should be checked against the selected XMC1000 family member before production release.

📱

Consumer and Household Equipment

The XMC1301Q040F0032ABXUMA1 can implement compact household products that require local sensing, user-interface handling, and configurable actuator control. Its low-cost Cortex-M0 architecture avoids the memory and processing overhead of a higher-end microcontroller, while 32 KB of flash provides enough room for application firmware and lookup tables. The ADC can monitor switches, resistive sensors, or analog control points, and the 35 GPIO lines can drive displays, indicators, relays, and communication peripherals. Designers should use the package drawing and datasheet to account for exposed-pad soldering and thermal-copper requirements.

🔋

Battery-Powered Monitoring Node

The XMC1301Q040F0032ABXUMA1 is suitable for low-power monitoring devices that periodically acquire sensor data, evaluate thresholds, and transmit results. Its Cortex-M0 core provides enough performance for compact protocol stacks and local filtering without requiring a large processor, while the 16 KB SRAM and 32 KB flash support configurable firmware. The 1.8 V minimum operating voltage is useful in battery-powered designs, although final energy consumption depends on clock configuration, active peripherals, and the duty cycle implemented in firmware. The ADC can also be used for battery or supply monitoring where its resolution and acquisition characteristics satisfy the application.

סיכום מוצרים מומלצים

XMC1302Q040X0200ABXUMA1 Related XMC1000-series mixed-signal controller בשימוש ב-: Digital Power Conversion, Motor and Actuator Control XMC1301-Q040F0032-AB Base industrial ordering designation בשימוש ב-: Digital Power Conversion, Motor and Actuator Control, Consumer and Household Equipment XMC1301-Q040F0008-AB Lower-memory XMC1301 option for compact acquisition nodes בשימוש ב-: Industrial Sensor Acquisition, Embedded PLC and Automation, Battery-Powered Monitoring Node XMC1301Q040F0016ABXUMA1 Same-family controller for mid-size sensor applications בשימוש ב-: Industrial Sensor Acquisition, Embedded PLC and Automation, Consumer and Household Equipment, Battery-Powered Monitoring Node
What are the key specifications of XMC1301Q040F0032ABXUMA1?
The XMC1301Q040F0032ABXUMA1 is a 32-bit ARM Cortex-M0 industrial microcontroller operating at up to 32 MHz with 32 KB of flash, 16 KB of SRAM, 35 I/O lines, and an integrated ADC. It uses a 40-pin PG-VQFN-13 surface-mount package and operates from 1.8 V to 5.5 V. According to the Infineon XMC1000 product documentation, the device is positioned for low-cost embedded control and digital power conversion applications.
What is the operating voltage of XMC1301Q040F0032ABXUMA1?
The XMC1301Q040F0032ABXUMA1 operates from 1.8 V to 5.5 V, with 3.3 V identified as the nominal supply and 5 V also supported. According to the Infineon XMC1000 documentation, this range allows the controller to operate in low-voltage sensor nodes as well as 5 V industrial equipment. The selected regulator should maintain the supply within its limits across temperature and load transients.
Where can I download the XMC1301Q040F0032ABXUMA1 datasheet PDF?
The XMC1301Q040F0032ABXUMA1 documentation is available through the Infineon XMC1301-Q040F0032-AB product page and the linked PG-VQFN-40-13 package PDF. The manufacturer datasheet contains the authoritative electrical characteristics, pin descriptions, memory map, peripherals, timing data, and package drawing. Use those documents when assigning every pin, selecting decoupling, and validating the PCB footprint.
Where can I find the XMC1301Q040F0032ABXUMA1 pinout?
The XMC1301Q040F0032ABXUMA1 pinout is documented in the Infineon XMC1000 datasheet and its PG-VQFN-40-13 package drawing. The device uses 40 terminals and includes an exposed pad that must be connected according to the land pattern and thermal guidance. Assign pin functions from the manufacturer pin-description table rather than relying solely on the package outline.
How much flash memory and RAM does the XMC1301Q040F0032ABXUMA1 have?
The XMC1301Q040F0032ABXUMA1 contains 32 KB of flash, specified as 32K x 8, and 16 KB of SRAM. According to the Infineon XMC1301-Q040F0032-AB product information, this combination supports embedded firmware, communication stacks, control logic, and working memory in cost-sensitive industrial products. Flash size should also be considered when planning OTA updates and retaining application data.
Is XMC1301Q040F0032ABXUMA1 suitable for industrial control applications?
Yes, the XMC1301Q040F0032ABXUMA1 is an industrial ARM Cortex-M0 MCU with a stated operating range of -40°C to +85°C. Its 32 MHz core, 35 I/O lines, integrated ADC, and 1.8 V to 5.5 V supply range fit motor-control, sensor-acquisition, digital power-conversion, and embedded automation designs. Final qualification should consider the complete system enclosure, EMC environment, and production test requirements.
XMC1301Q040F0032ABXUMA1 vs XMC1301Q040F0016ABXUMA1: which has more memory?
The XMC1301Q040F0032ABXUMA1 has 32 KB of flash, while the XMC1301Q040F0016ABXUMA1 is identified as the 16 KB-flash member of the same XMC1301 family. The 0032 version therefore provides 16 KB more program memory, equivalent to a 100% increase over the 0016 variant. Both belong to the 32 MHz Cortex-M0 product family, but final replacement suitability depends on the complete package and pin configuration.
When should I choose XMC1301Q040F0032ABXUMA1 over a 16 KB-flash alternative?
Choose the XMC1301Q040F0032ABXUMA1 when firmware size, protocol handling, logging, or future code expansion makes 16 KB of SRAM with 32 KB of flash insufficient. The 32 KB option provides twice the flash capacity of the 16 KB XMC1301 family variant, allowing larger application code and data tables without changing the 32 MHz Cortex-M0 architecture. Choose the smaller option only when the complete firmware comfortably fits its memory budget.
What can replace XMC1301Q040F0032ABXUMA1 without changing the PCB?
The closest drop-in candidates are same-package members of the XMC1300 and closely related XMC1000 families, provided their exact pin assignment, voltage range, peripherals, and memory requirements match the target design. The XMC1301Q040F0016ABXUMA1 offers 16 KB rather than 32 KB of flash, while the XMC1301-Q040F0008-AB offers 8 KB. Use the manufacturer ordering guide and pin tables to confirm interchangeability before substitution.
Is XMC1301Q040F0032ABXUMA1 the same as XMC1301-Q040F0032-AB?
The Infineon product page identifies XMC1301-Q040F0032-AB as the underlying industrial device ordering designation for the XMC1301Q040F0032ABXUMA1 ordering code. The longer code includes the specified package and tape-and-reel shipping configuration. Both identify a 32 MHz Cortex-M0 MCU with 32 KB of flash and 16 KB of SRAM, so procurement should preserve the exact suffix required by the approved BOM.
Where can I buy XMC1301Q040F0032ABXUMA1 online?
Use the Request a Quote form on this page to request XMC1301Q040F0032ABXUMA1 availability, volume pricing, and lead time. The exact ordering code includes a 40-pin PG-VQFN package and tape-and-reel shipment configuration, so the quote should state the complete MPN. The manufacturer lists the device as an active industrial MCU, but current stock and production allocation should be confirmed through the quote workflow.
What is the price of XMC1301Q040F0032ABXUMA1?
Current XMC1301Q040F0032ABXUMA1 pricing is handled through the Request a Quote form on this page. The quote should include the exact tape-and-reel ordering code, desired shipment quantity, and delivery location. This avoids ambiguity with the XMC1301-Q040F0032-AB base ordering designation and allows the commercial response to reflect the requested quantity and current supply position.
What is the lead time for XMC1301Q040F0032ABXUMA1?
The current lead time for XMC1301Q040F0032ABXUMA1 should be confirmed through the Request a Quote form on this page. Include the required quantity, target ship date, and whether multiple production locations or scheduled deliveries are needed. The Infineon listing identifies the device as an active industrial microcontroller, but production timing and available inventory can vary by order quantity and market conditions.
Is XMC1301Q040F0032ABXUMA1 in stock?
Current stock for XMC1301Q040F0032ABXUMA1 is available through the Request a Quote form on this page. State the exact MPN, tape-and-reel requirement, and required quantity so the response can distinguish the 32 KB-flash ordering code from related XMC1301 variants. A listing that says the component ships today does not guarantee inventory for every production quantity.
What design constraints matter for the XMC1301Q040F0032ABXUMA1 VQFN package?
The XMC1301Q040F0032ABXUMA1 requires correct land-pattern, thermal-pad, and solder-reflow treatment because it is supplied in a 40-pin PG-VQFN-13 package. Follow the Infineon PG-VQFN-40-13 package drawing for pad dimensions, exposed-pad connection, solder mask, and paste layout. Place input, ground, and decoupling connections directly beneath the device to minimize loop area and preserve regulator performance.

נתוני עזר הנדסיים עבור XMC1301Q040F0032ABXUMA1 — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose XMC1301Q040F0032ABXUMA1 when an industrial embedded design needs a 32 MHz ARM Cortex-M0 core, 32 KB of flash, 16 KB of SRAM, an integrated ADC, and 35 I/O lines in a compact 40-pin VQFN. Select XMC1301Q040F0016ABXUMA1 only when 16 KB of flash is sufficient and reducing memory usage is valuable. Consider XMC1301-Q040F0008-AB for very small fixed-function firmware, and review XMC1302Q040X0200ABXUMA1 when its additional mixed-signal resources justify a 20 KB flash limit. Confirm exact pin compatibility, peripheral mapping, exposed-pad construction, and ordering suffix before replacing the target in a released design.

השוואה עם חלופות

פרמטר מוצר זה XMC1301Q040F0016ABXUMA1 XMC1301-Q040F0008-AB XMC1301-Q040F0016-AB XMC1302Q040X0200ABXUMA1
Package PG-VQFN-40-13, 40 terminals PG-VQFN-40-13, 40 terminals PG-VQFN-40-13, 40 terminals PG-VQFN-40-13, 40 terminals PG-VQFN-40-13, 40 terminals
Brand Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies
Processor Core ARM Cortex-M0, 32-bit RISC ARM Cortex-M0, 32-bit RISC ARM Cortex-M0, 32-bit RISC ARM Cortex-M0, 32-bit RISC ARM Cortex-M0, 32-bit RISC
Maximum Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 32 KB 16 KB 8 KB 16 KB 20 KB

מבדילים עיקריים

  • Double the flash capacity of the 16 KB same-family option (לעומתXMC1301Q040F0016ABXUMA1)
  • Four times the flash capacity of the 8 KB same-family option (לעומתXMC1301-Q040F0008-AB)
  • Larger firmware budget than the 20 KB XMC1302 option (לעומתXMC1302Q040X0200ABXUMA1)
  • Exact electrical configuration in the base industrial ordering designation (לעומתXMC1301-Q040F0032-AB)

הערות תכנון

Treat the exposed pad as both an electrical connection and the primary thermal path. Use the PG-VQFN-40-13 land pattern, maintain the recommended pad and solder-mask geometry, and provide uninterrupted ground copper beneath and around the device. Check the finished-board thermal performance at the maximum intended ambient temperature and switching activity. Avoid placing a keepout or thermal break directly beneath the controller when the application operates near the upper temperature limit.

Place the supply-decoupling capacitor at the power pin with the shortest possible connection to the ground reference, and keep the controller's ground return close to the associated analog and digital return paths. The ADC should use a quiet source and a locally referenced return. Follow the manufacturer pin descriptions and package drawing for exposed-pad connection and inspect the PCB stackup against the selected assembly process before releasing artwork.

Do not substitute a lower-flash XMC1301 member solely because the package name appears identical. A 16 KB alternative reduces program memory by 50%, while the 8 KB member reduces it by 75%; either change can prevent the firmware from linking or leave insufficient space for future updates. Also confirm peripheral availability, pin multiplexing, package dimensions, and exposed-pad requirements against the manufacturer datasheet for every proposed replacement.

Design the regulator for the controller's complete 1.8 V to 5.5 V operating range, including startup, transient response, and peripheral loading. Ensure the chosen supply remains within limits during brownout and rapid load changes. The controller's ADC reference and analog measurement accuracy also depend on supply quality, so filtering should suppress switching noise without preventing the required control-loop response.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The device is designated for industrial applications, but explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 statements require confirmation from the manufacturer product documentation.

הנתונים אומתו בתאריך: 2026-11-16 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

XMC1301Q040F0032ABXUMA1 datasheet XMC1301Q040F0032ABXUMA1 pinout XMC1301Q040F0032ABXUMA1 datasheet pdf XMC1301Q040F0032ABXUMA1 equivalent XMC1301Q040F0032ABXUMA1 replacement XMC1301Q040F0032ABXUMA1 price XMC1301Q040F0032ABXUMA1 stock XMC1301Q040F0032ABXUMA1 footprint XMC1301Q040F0032ABXUMA1 vs XMC1301Q040F0016ABXUMA1 Infineon XMC1301Q040F0032ABXUMA1 XMC1301Q040F0032ABXUMA1 application circuit XMC1301 32MHz Cortex-M0 VQFN-40

רכיבים ומונחים קשורים

Infineon Technologies XMC1301Q040F0032ABXUMA1 XMC1301-Q040F0032-AB XMC1301Q040F0016ABXUMA1 XMC1301-Q040F0008-AB XMC1302Q040X0200ABXUMA1 XMC1000 ARM Cortex-M0 32-bit RISC microcontroller embedded microcontroller industrial control digital power conversion 32 MHz 32 KB flash 16 KB SRAM 35 I/O lines integrated ADC PG-VQFN-40-13 QFN family surface mount SMD 1.8 V to 5.5 V RoHS REACH AEC-Q100
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר