Infineon

XMC4300F100F256AAXQMA1 - 144MHz Cortex-M4 MCU | Infineon

MPN: XMC4300F100F256AAXQMA1 ✓ פעיל
PG-LQFP-100-25 Package 144 MHz Speed 256 KB Memory
כמות הזמנה מינימלית: 1 |

XMC4300F100F256AAXQMA1 סקירה

Infineon Technologies XMC4300F100F256AAXQMA1 is a 32-bit Arm Cortex-M4 microcontroller operating at 144 MHz, with 256 KB of flash memory, 128 KB of SRAM, and an integrated Ethernet MAC in a PG-LQFP-100-25 package. The device belongs to the XMC4000 family of industrial microcontrollers and combines a high-performance processor core with real-time Ethernet connectivity and mixed-signal peripherals.

An Arm Cortex-M4 microcontroller is a 32-bit embedded processor within the wider category of microcontrollers, embedded processors, and semiconductors. It combines a processor core with memory, communication peripherals, timers, and analog or mixed-signal resources in one integrated circuit. XMC devices add industrial real-time capabilities and deterministic peripherals to the standard Arm Cortex-M architecture, making them suitable for control systems that require both network communication and precise timing.

The XMC4300F100F256AAXQMA1 provides 256 KB of flash for firmware and 128 KB of SRAM for working data. Its 144 MHz Arm Cortex-M4 core includes the architectural features expected of the Cortex-M4 family, while the integrated Ethernet MAC supports industrial Ethernet-connected equipment. The PG-LQFP-100-25 package provides 100 leads and is intended for surface-mount PCB assembly. The order code identifies the industrial XMC4300 configuration and its qualification and temperature-grade attributes.

EtherCAT support is an important feature of the XMC4300 family. The family documentation describes EtherCAT as a real-time Ethernet standard intended to combine substantial bandwidth with deterministic communication timing. Integrating this functionality into an Arm Cortex-M4 microcontroller allows EtherCAT nodes to be implemented without requiring a separate communications processor, provided the system also uses suitable external network hardware.

Typical uses include industrial automation controllers, EtherCAT slave equipment, motor-control systems, industrial communication gateways, and embedded control platforms with both analog and digital signal-chain requirements. The 144 MHz processing rate supports responsive control loops, while the integrated Ethernet MAC and EtherCAT capability address synchronized networking. Designers should account for the exact peripheral mapping, electrical limits, clock requirements, and package dimensions shown in the manufacturer datasheet and reference manual.

PCB design should preserve the recommended power, decoupling, clock, reset, and analog grounding arrangements from the XMC4300 documentation. The 100-lead LQFP geometry requires adequate copper clearance between adjacent pins and careful inspection of fine-pitch soldering. Firmware support should account for peripheral-specific startup requirements and the timing constraints of EtherCAT and other high-speed communication functions.

This product page combines manufacturer specifications with application guidance, practical PCB considerations, and a qualified comparison framework. It is intended to help engineers confirm memory capacity, processor performance, package compatibility, connectivity requirements, and implementation risks before committing the XMC4300F100F256AAXQMA1 to an industrial embedded design.

חלופות תחליף ישיר עבור XMC4300F100F256AAXQMA1 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

אין חלופות תואמות Drop-in עבור מוצר זה.

בקשת חלופות

XMC4300F100F256AAXQMA1 דירוגים מרביים ומאפיינים חשמליים

Product Type 32-bit industrial microcontroller
Processor Core Arm Cortex-M4
Maximum CPU Frequency 144 MHz
Architecture 32-bit
Flash Memory 256 KB
SRAM 128 KB
Ethernet Support Integrated Ethernet MAC
EtherCAT Support Integrated EtherCAT capability
Product Family XMC4000
Device Designation XMC4300-F100F256-AA
מארז PG-LQFP-100-25
Lead Count 100 leads
סוג הרכבה Surface mount
Qualification Level Industrial

מדריך תצורת פינים של XMC4300F100F256AAXQMA1 pg-lqfp-100-25

תצורת פינים עבור XMC4300F100F256AAXQMA1 (מארזת pg-lqfp-100-25). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת pg-lqfp-100-25 עבור XMC4300F100F256AAXQMA1

אין נתוני פריסת פינים מפורטים עבור XMC4300F100F256AAXQMA1.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

XMC4300F100F256AAXQMA1 מתאים עבור 6 יישוםs: EtherCAT Industrial Slave Controller, Industrial Motor-Control Controller, Factory Automation Communication Gateway, Distributed Control I/O Node, Industrial Sensor and Condition-Monitoring Node, Embedded Industrial Test and Control Platform.

🏭

EtherCAT Industrial Slave Controller

The XMC4300F100F256AAXQMA1 fits an EtherCAT slave controller because it combines a 144 MHz Arm Cortex-M4 core with EtherCAT support and an integrated Ethernet MAC. The 256 KB flash can hold application firmware, configuration data, and communication routines, while 128 KB SRAM supports packet handling, motion state, and application variables. This integration can reduce the controller count compared with a design that separates EtherCAT communication from real-time control. The final implementation still needs the appropriate external Ethernet interface hardware, isolation strategy, magnetic components, and signal routing. Firmware timing and peripheral availability must be checked against the XMC4300 reference documentation before the design enters production.

⚡

Industrial Motor-Control Controller

The 144 MHz Cortex-M4 core and XMC4000 mixed-signal resources make the XMC4300F100F256AAXQMA1 suitable for a real-time motor-control controller. Firmware can combine motion algorithms, protection handling, and communication tasks within one device, supported by 256 KB flash and 128 KB SRAM. EtherCAT connectivity is valuable when the controller participates in a synchronized multi-axis machine. Designers should verify the required PWM outputs, capture-and-compare channels, ADC characteristics, sensor inputs, and timer architecture directly in the manufacturer documentation. The 100-lead LQFP also provides a defined route for external sensing and gate-driver interfaces, although those external circuits remain necessary for power conversion.

🌐

Factory Automation Communication Gateway

Use the XMC4300F100F256AAXQMA1 as the processing center of an industrial communication gateway when both deterministic networking and local real-time control are needed. Its 144 MHz Cortex-M4 core can service protocol processing, data transformation, diagnostics, and machine-control tasks, while 256 KB flash and 128 KB SRAM support embedded networking firmware. The integrated Ethernet MAC simplifies the system partitioning compared with a processor that lacks Ethernet hardware. For deployment, engineers must define the required physical network interface, isolation, connector protection, and environmental test conditions. Firmware partitioning and update mechanisms should also account for the limited memory footprint and the need to preserve real-time response during diagnostics or network maintenance.

🧩

Distributed Control I/O Node

The XMC4300F100F256AAXQMA1 can form the core of a distributed control I/O node that combines EtherCAT communication with local analog and digital processing. Its 144 MHz Arm Cortex-M4 core provides deterministic execution, and the integrated mixed-signal resources associated with the XMC4300 family can reduce the amount of external signal-conditioning circuitry. The 100-lead LQFP package provides access to the device's digital and analog functions while supporting conventional surface-mount assembly. A practical design must confirm ADC accuracy, channel multiplexing, I/O voltage levels, isolation requirements, and analog grounding. Production software should also include communication-watchdog, output-safe-state, and diagnostic behavior appropriate to industrial equipment.

📡

Industrial Sensor and Condition-Monitoring Node

The XMC4300F100F256AAXQMA1 is suitable for an industrial condition-monitoring node that gathers sensor information and communicates it over a real-time Ethernet network. Its 144 MHz Cortex-M4 core can execute sampling coordination, filtering, event detection, and diagnostics, while 256 KB flash supports embedded software and 128 KB SRAM accommodates buffers and operating state. EtherCAT integration makes the node appropriate for synchronized machine monitoring where deterministic communication matters. Design work should confirm the required analog inputs, sampling characteristics, sensor interfaces, and timing. For field reliability, include remote reset or recovery behavior, data validation, secure firmware-update controls, and the environmental protection appropriate to the installation location.

🖥️

Embedded Industrial Test and Control Platform

The XMC4300F100F256AAXQMA1 can serve as an embedded industrial test-and-control platform that coordinates measurements, sequencing, and real-time network communication. The Arm Cortex-M4 core operates at 144 MHz, providing capacity for control loops alongside diagnostics and protocol handling. Its 256 KB flash and 128 KB SRAM make the device appropriate for compact embedded firmware rather than a large host-based controller. EtherCAT capability can synchronize the platform with other automation equipment when a system-level timing budget is required. Engineers should verify timer accuracy, analog performance, trigger routing, and available I/O against the test specification. PCB implementation must also account for analog reference integrity, digital return paths, clock jitter tolerance, and the fine-pitch 100-lead package.

What are the key specifications of XMC4300F100F256AAXQMA1 that engineers should know?
The XMC4300F100F256AAXQMA1 is a 144 MHz, 32-bit Arm Cortex-M4 industrial microcontroller with 256 KB of flash, 128 KB of SRAM, an integrated Ethernet MAC, and EtherCAT capability. Infineon identifies the device as XMC4300-F100F256-AA in its ordering information. It is supplied in a 100-lead PG-LQFP surface-mount package. These parameters position it for industrial automation, real-time Ethernet, EtherCAT, and embedded motor-control systems.
What is the processing speed and memory configuration of XMC4300F100F256AAXQMA1?
The XMC4300F100F256AAXQMA1 runs at 144 MHz and uses a 32-bit Arm Cortex-M4 processor core. It provides 256 KB of flash memory for program storage and 128 KB of SRAM for runtime data. According to the Infineon product page, these resources support the industrial XMC4000 architecture. Designers should size firmware, interrupt tables, diagnostics, and communication buffers against the stated flash and SRAM limits.
Does XMC4300F100F256AAXQMA1 include Ethernet connectivity?
Yes, the XMC4300F100F256AAXQMA1 includes an Ethernet MAC and EtherCAT capability. Infineon describes the XMC4300 as an industrial Arm Cortex-M4 microcontroller with EtherCAT support, combining real-time Ethernet communication with an integrated processor and memory subsystem. An Ethernet MAC alone does not include every external network-interface component, so the final board design still requires the applicable PHY, magnetics, routing, and protection provisions.
Where can I download the XMC4300F100F256AAXQMA1 datasheet PDF?
The official XMC4300 datasheet PDF is available from Infineon at https://www.infineon.com/assets/row/public/documents/30/49/infineon-xmc4300-datasheet-en.pdf. The manufacturer product page is https://www.infineon.com/part/XMC4300-F100F256-AA. Use the datasheet for ordering-code interpretation, electrical characteristics, package information, and derivative-device details, and consult the associated reference manual and errata when implementing peripherals or low-level drivers.
Where can I find the pinout for XMC4300F100F256AAXQMA1?
The pin assignments are identified in the manufacturer XMC4300 datasheet and package information for the PG-LQFP-100-25 device. The XMC4300 datasheet is available from Infineon at https://www.infineon.com/assets/row/public/documents/30/49/infineon-xmc4300-datasheet-en.pdf. Use its pin-description and package drawings when assigning nets, and follow the reference manual for alternate-function and peripheral-input requirements.
What package is used by XMC4300F100F256AAXQMA1?
The XMC4300F100F256AAXQMA1 uses a PG-LQFP-100-25 package with 100 leads. Infineon identifies the device as a surface-mount 100-pin LQFP in its product and distributor records. The lead pitch, body dimensions, exposed thermal requirements, and recommended land pattern must be taken from the package drawing in the manufacturer datasheet rather than inferred from the order code.
Is XMC4300F100F256AAXQMA1 suitable for EtherCAT industrial automation?
The XMC4300F100F256AAXQMA1 is suitable for EtherCAT-oriented industrial automation because it combines a 144 MHz Arm Cortex-M4 core with EtherCAT support and an Ethernet MAC. Infineon describes the XMC4300 family as combining EtherCAT with a standard Arm Cortex-M4 controller, integrated flash, and mixed-signal resources. Final qualification still requires checking peripheral assignments, timing, external interface hardware, and applicable industrial system requirements.
What is the difference between XMC4300F100F256AAXQMA1 and XMC4300-F100F256-AA?
They identify the same Infineon XMC4300 device using two ordering formats: XMC4300F100F256AAXQMA1 is the full distributor-style order code, while XMC4300-F100F256-AA is the manufacturer designation shown on the product page. Both refer to the 144 MHz Arm Cortex-M4 configuration with 256 KB flash, 128 KB SRAM, and integrated Ethernet capability. The suffix sequence also communicates package and qualification information.
What is the best drop-in replacement for XMC4300F100F256AAXQMA1?
No verified drop-in replacement is established for the XMC4300F100F256AAXQMA1 by the available manufacturer and cross-reference records. A true replacement must preserve the 100-lead PG-LQFP footprint, pin functions, 144 MHz operating point, 256 KB flash, 128 KB SRAM, Ethernet MAC, EtherCAT resources, clocking, and electrical characteristics. Use the Request a Quote form on this page to discuss an exact replacement or sourcing requirement.
Can another microcontroller replace XMC4300F100F256AAXQMA1 without PCB changes?
A PCB-compatible replacement cannot be confirmed without an exact manufacturer cross-reference. The target combines a 100-lead PG-LQFP package with 144 MHz operation, 256 KB flash, 128 KB SRAM, Ethernet MAC, EtherCAT support, and mixed-signal peripherals. Matching CPU speed and memory alone is insufficient; verify every pin, peripheral instance, interrupt vector, clock feature, supply range, and software-support requirement before treating a candidate as drop-in.
When should I choose XMC4300F100F256AAXQMA1 instead of a generic Cortex-M4 MCU?
Choose the XMC4300F100F256AAXQMA1 when a design needs its combination of a 144 MHz Cortex-M4 core and industrial real-time networking features. The integrated Ethernet MAC and EtherCAT support can simplify the architecture of EtherCAT nodes and industrial communication equipment compared with a general-purpose MCU that requires substantially more external support. Choose a generic Cortex-M4 device only when its networking, analog, timer, qualification, and software features are independently validated.
Is XMC4300F100F256AAXQMA1 suitable for motor control and factory automation?
The XMC4300F100F256AAXQMA1 fits factory automation and motor-control applications that benefit from fast deterministic processing and real-time Ethernet connectivity. Its 144 MHz Cortex-M4 core provides processing headroom, while the XMC4300 family integrates EtherCAT and mixed-signal resources. Verify the required PWM channels, ADC performance, position-sensor interfaces, safety functions, operating temperature, and board-level drive electronics in the manufacturer documentation.
Where can I buy XMC4300F100F256AAXQMA1 online?
Use the Request a Quote form on this page to request current XMC4300F100F256AAXQMA1 availability, lead time, and order handling. Infineon identifies the component as XMC4300-F100F256-AA, a 144 MHz Arm Cortex-M4 industrial microcontroller with 256 KB flash, 128 KB SRAM, and Ethernet MAC. Confirm the exact suffix, package, quantity, and delivery requirements when submitting the request.
What is the price of XMC4300F100F256AAXQMA1?
Current commercial terms for XMC4300F100F256AAXQMA1 should be requested through the Request a Quote form on this page because quotation status, quantity, and supply conditions can change. The request should identify the exact XMC4300F100F256AAXQMA1 suffix, required quantity, target date, and delivery location. This preserves the exact 100-lead industrial ordering code and avoids ambiguity with related XMC4300 configurations.
What is the lead time and stock status for XMC4300F100F256AAXQMA1?
Request the current lead time, stock position, and minimum order quantity through the Request a Quote form on this page. Infineon continues to identify the device as XMC4300-F100F256-AA, but current availability can vary with the exact suffix and order quantity. State the required package, annual usage, forecast horizon, and approved delivery schedule so the commercial response reflects the actual production demand.
What can replace XMC4300F100F256AAXQMA1?
The available cross-reference records do not identify a verified pin-compatible replacement for the XMC4300F100F256AAXQMA1. The closest functional family members still need package, peripheral, clock, memory, qualification, and software validation before replacement. For a qualified sourcing review, submit the exact order code and required system functions through the Request a Quote form on this page rather than relying on a CPU-speed or memory-capacity match alone.

נתוני עזר הנדסיים עבור XMC4300F100F256AAXQMA1 — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the XMC4300F100F256AAXQMA1 when an industrial control design requires a 144 MHz Arm Cortex-M4 core, 256 KB flash, 128 KB SRAM, and integrated Ethernet with EtherCAT support in a 100-lead PG-LQFP package. It is particularly relevant to EtherCAT nodes, synchronized motor-control equipment, distributed I/O, and factory automation platforms where deterministic networking and local real-time processing share one MCU. No verified drop-in substitute was established, so a different part should be selected only after its package, pin multiplexing, peripherals, clocking, electrical limits, and software ecosystem have been checked. Generic Cortex-M4 devices may offer lower-cost or broader ecosystem options, but they do not automatically provide equivalent EtherCAT integration, mixed-signal resources, or firmware compatibility. For a constrained PCB, require a manufacturer-confirmed pin-compatible replacement before redesigning the layout.

השוואה עם חלופות

פרמטר מוצר זה
Package PG-LQFP-100-25
Brand Infineon Technologies
Processor Core Arm Cortex-M4
CPU Frequency 144 MHz
Architecture 32-bit
Flash Memory 256 KB
SRAM 128 KB
Ethernet Connectivity Integrated Ethernet MAC
EtherCAT Support Yes
Product Class Industrial microcontroller

הערות תכנון

Use the manufacturer PG-LQFP-100 land pattern, pin-1 orientation, paste stencil, and solder-profile recommendations without changing lead spacing to accommodate a generic 100-pin footprint. Check every analog, digital, supply, ground, clock, and debug signal against the package pin table before release. Place decoupling capacitors at their associated supply pins with short return paths, and preserve the recommended keep-out regions beneath or around the device where shown in the package documentation.

Treat clock, Ethernet, and other high-speed routes as controlled-impedance nets when the applicable interface specification requires it. Keep the crystal or clock source close to the device, maintain a continuous ground reference, and avoid routing sensitive analog inputs beside digital switching nodes. For EtherCAT interfaces, follow the electrical-interface and isolation recommendations in the XMC4300 documentation and validate signal integrity with the intended PHY, magnetics, connectors, and multilayer stack-up.

Do not treat a generic Cortex-M4 as a drop-in replacement solely because it also uses Arm architecture. Verify the 100-lead package, pin multiplexing, clock tree, memory sizes, Ethernet MAC, EtherCAT resources, analog peripherals, startup behavior, and firmware-support ecosystem. Likewise, do not infer the electrical limits or temperature range from the XQMA1 suffix alone; consult the ordering table, package information, and device-specific electrical characteristics before component selection.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The manufacturer identifies the XMC4300-F100F256-AA configuration as an industrial microcontroller. Specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive-qualification statements were not established by the available product records.

הנתונים אומתו בתאריך: 2026-11-11 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

XMC4300F100F256AAXQMA1 datasheet XMC4300F100F256AAXQMA1 pinout XMC4300F100F256AAXQMA1 datasheet pdf XMC4300F100F256AAXQMA1 equivalent XMC4300F100F256AAXQMA1 replacement XMC4300F100F256AAXQMA1 LQFP-100 XMC4300F100F256AAXQMA1 EtherCAT XMC4300F100F256AAXQMA1 price XMC4300F100F256AAXQMA1 stock Infineon XMC4300F100F256AAXQMA1 XMC4300F100F256AAXQMA1 application circuit XMC4300F100F256AAXQMA1 programming

רכיבים ומונחים קשורים

Infineon Technologies XMC4300F100F256AAXQMA1 XMC4300-F100F256-AA XMC4000 XMC4300 Arm Cortex-M4 32-bit microcontroller embedded microcontroller industrial microcontroller semiconductor EtherCAT Ethernet MAC real-time Ethernet 256 KB flash 128 KB SRAM 144 MHz PG-LQFP-100-25 LQFP package surface mount industrial automation motor control distributed I/O mixed-signal peripherals EtherCAT slave controller
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר