Z8619340ASC - 40MHz 8-Bit ROMless MCU | Zilog | Embedded
MPN: Z8619340ASC ✓ פעילZ8619340ASC סקירה
A microcontroller is a programmable semiconductor that integrates a processor core, memory interfaces, and peripherals into one compact device. The Z8 belongs to the Zilog Z8 family of 8-bit microcontrollers within the broader embedded-controller hierarchy. Unlike a ROM-based device, the Z8619340ASC is ROMless, so its executable program must be supplied through external memory connected to the bus interface.
The device operates at 40 MHz and provides 444 bytes of internal RAM. Its 32 I/O pins support digital input and output functions for control panels, communication interfaces, and mixed peripheral connections. The 64-pin LQFP package provides substantially more interconnect capacity than a small 8-pin or 20-pin microcontroller, allowing more signals to reach the processor and associated external circuitry.
The Z8619340ASC uses the Zilog Z8 architecture and is identified as ROMless in the manufacturer-related product information. A multiply/divide capability is also indicated in a product listing, providing useful arithmetic performance for control algorithms without requiring the MCU to rely on an external accelerator. Because the program storage is external, board-level memory selection remains an important part of the complete system definition.
Typical uses include industrial control, instrument panels, keypad interfaces, communications equipment, and embedded products requiring numerous I/O connections. The 32 available I/O pins are especially useful when a design combines logic-level sensors, status indicators, communication transceivers, and actuator-control outputs. The 40 MHz operating rate also permits timely execution of typical embedded-control tasks.
When designing around the Z8619340ASC, verify the external memory interface requirements, available I/O assignment, and package dimensions against the official technical documentation. Keep sensitive clock and reset paths short, provide the required decoupling near the supply pins, and confirm that all connected peripherals use compatible logic levels. The LQFP footprint also requires adequate assembly clearance and inspection access for its fine-pitch leads.
This product page consolidates the verified Z8 architecture, operating speed, memory configuration, I/O count, package information, sourcing paths, replacement guidance, and practical integration considerations. It also highlights the design trade-offs associated with ROMless execution and distinguishes the verified family alternative from options that require a complete hardware and firmware review.
חלופות תחליף ישיר עבור Z8619340ASC — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם Z8619340ASC (אותו גורם צורה וטביעת רגל) — שונים ב Program Memory Type.
Z8619340ASG
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←Z8619340PSC
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
Z8619340FSG
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
Z8619340ASC דירוגים מרביים ומאפיינים חשמליים
| Microcontroller Family | Z8 Z8 series |
| Processor Architecture | 8-bit |
| תדר שעון מקסימלי | 40 MHz |
| Program Memory Type | ROMless |
| Internal RAM | 444 × 8 bytes |
| I/O Pin Count | 32 pins |
| Total Package Pin Count | 64 pins |
| Package Type | 64-pin LQFP |
| סוג הרכבה | Surface mount |
| Processor Core | Z8 core |
| Arithmetic Capability | Multiply/divide |
מדריך תצורת פינים של Z8619340ASC 64-pin lqfp
תצורת פינים עבור Z8619340ASC (מארזת 64-pin lqfp). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור Z8619340ASC.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
Z8619340ASC מתאים עבור 6 יישוםs: Industrial Control Panels, Keypad and Human-Interface Systems, Communications Equipment, Instrumentation and Measurement Products, Embedded Appliance Controllers, Security and Access-Control Modules.
Industrial Control Panels
The Z8619340ASC fits industrial control-panel designs requiring many discrete inputs and outputs while retaining a straightforward 8-bit control architecture. Its 40 MHz operating rate gives the Z8 processor ample timing margin for scanning controls, updating indicators, and coordinating peripheral actions, while 32 I/O pins can connect switches, lamps, relays, and discrete sensors without an additional I/O expander. The 444 × 8 bytes of internal RAM support variables, stack activity, and short task data sets. As a ROMless design, it also allows program storage to be selected according to firmware size and update requirements, although external memory routing and address decoding must be planned carefully on the PCB.
מומלץ
Keypad and Human-Interface Systems
The Z8619340ASC is suitable for keypads, operator panels, and compact human-interface modules because it combines a 40 MHz 8-bit processor with 32 I/O pins. Matrix keys, LEDs, status indicators, and panel-control signals can be organized across the available I/O resources while the processor handles debouncing, display updates, and command processing. Internal RAM of 444 × 8 bytes provides working storage for interface state and short message buffers. Since the device is ROMless, designers can use external program memory sized for a complete application and keep the MCU package independent of firmware length. PCB design should preserve access to all fine-pitch LQFP leads and provide local supply decoupling.
מומלץ
Communications Equipment
The Z8619340ASC can serve as the supervisory controller in communications equipment where an external serial transceiver performs the physical-layer function while the MCU handles configuration, status monitoring, and data routing. Its 32 I/O pins leave substantial capacity for modem-control signals, reset lines, indicators, and selectable interfaces, and the 40 MHz clock supports timely protocol servicing. The ROMless architecture is useful when firmware must be stored in external nonvolatile memory or when product configurations require different code images. The 444-byte internal RAM is suitable for protocol state and temporary buffers, but larger frame buffers should be placed in external memory. Signal integrity and grounding should be planned around any attached transceiver rather than routing communications lines through the MCU area.
מומלץ
Instrumentation and Measurement Products
The Z8619340ASC fits instrumentation products that combine digital control with external measurement circuitry. The processor can coordinate an external analog-to-digital converter, control relays or references, process switch inputs, and maintain operating state across the 32 available I/O pins. Its 40 MHz 8-bit core and multiply/divide capability support common scaling, filtering, and control calculations, while 444 bytes of RAM accommodate bounded working data. Because the MCU is ROMless, the board can include external memory selected for calibration tables, logging code, or field-update flexibility. Designers should isolate sensitive analog paths from the digital clock and memory bus and verify grounding and decoupling arrangements with the complete measurement front end in mind.
מומלץ
Embedded Appliance Controllers
The Z8619340ASC can control embedded appliances and equipment that require a moderate number of digital connections but do not justify a higher-complexity processor. The 32 I/O pins accommodate door or limit switches, indicator LEDs, relays, and control inputs, while the 40 MHz Z8 core executes control tasks and timing functions. Its 444-byte internal RAM is suitable for compact state machines and stack-intensive code, and the ROMless configuration allows external nonvolatile program storage to be selected for the product's firmware capacity. A key design trade-off is that external program memory adds board area and signal routing, so address, data, and control lines should be routed consistently, with the memory placed close to the microcontroller when timing margins permit.
מומלץ
Security and Access-Control Modules
The Z8619340ASC is appropriate for access-control and security modules where a deterministic 8-bit controller manages keys, lock outputs, request inputs, status indicators, and communication links. Its 32 I/O pins allow multiple readers or supervisory inputs to be integrated, and the 40 MHz clock supports responsive scanning and event handling. The multiply/divide feature can assist with common arithmetic operations, while 444 bytes of RAM can retain short transaction and state information. As a ROMless MCU, program storage remains external, permitting code capacity and memory technology to be chosen according to the product architecture. Security implementations should add the necessary protection, isolation, and tamper-response measures rather than relying on controller speed alone.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור Z8619340ASC — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | Z8619340ASG | Z8619340PSC | Z8619340FSG |
|---|---|---|---|---|
| Brand | Zilog | Zilog | Zilog | Zilog |
| Package | 64-pin LQFP | 64-pin LQFP | 64-pin LQFP | 64-pin LQFP |
| Processor Architecture | 8-bit Z8 | 8-bit Z8 | 8-bit Z8 | 8-bit Z8 |
| Maximum Clock Frequency | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| Program Memory Type | ROMless | ROMless | ROMless | ROMless |
מבדילים עיקריים
- Verified 40 MHz processing rate with 32 I/O pins (לעומתZ8619340ASG)
- ROMless architecture supports external program-memory selection (לעומתZ8619340PSC)
- 444-byte internal RAM and multiply/divide capability (לעומתZ8619340FSG)
הערות תכנון
Route the external program-memory bus directly between the Z8619340ASC and its memory device, keeping address, data, and control traces short and away from noisy analog or switching-node paths. The ROMless architecture makes the external bus part of the processor’s critical timing path. Confirm address decoding and all memory-control signals against the manufacturer’s hardware guidance before releasing the layout, and place bypass capacitors close to the device supply pins.
Assign the 32 I/O pins before finalizing the surrounding schematic so pull-ups, level shifters, connectors, and test points do not force avoidable layer transitions. The 64-pin LQFP has fine-pitch leads, so maintain the assembly footprint’s pad and solder-mask geometry exactly. Provide adequate courtyard clearance for inspection and rework, particularly near connectors or tall analog components that could obstruct the board edge.
Use the manufacturer’s specified voltage range and decoupling configuration when designing the supply network. The exact operating limits and capacitor values are not established here, so avoid generic substitutions without checking the device documentation. Place high-frequency bypass capacitance at the supply pins, provide a stable return path, and keep clock and reset traces away from potential switching sources to reduce false transitions and unstable startup behavior.
Do not treat a matching 64-pin LQFP footprint as sufficient proof of interchangeability. Check the ordering-code suffix, temperature grade, qualification status, pin definitions, supply range, clock limits, external-memory interface, and package construction. After hardware substitution, verify reset behavior, boot timing, external-memory access, and all peripheral functions under both idle and maximum planned load conditions.
מידע על תאימות
The verified product information does not establish the requested compliance or environmental statuses. Confirm these attributes using the manufacturer’s current declaration or product documentation for the exact ordering code.