Zilog

Z86E3016PSC - 8-Bit 16MHz 4KB OTP Microcontroller | Zilog

MPN: Z86E3016PSC ✓ פעיל
16 MHz Speed 4 KB Memory
כמות הזמנה מינימלית: 1 |

Z86E3016PSC סקירה

The Zilog Z86E3016PSC is an 8-bit Z8 microcontroller operating at 16 MHz with 4 KB of one-time-programmable memory organized as 4K × 8 bits. The device is intended for compact embedded-control tasks that require deterministic peripheral control, low-cost programming, and a compact microcontroller architecture. Its 4 KB OTP program memory suits products whose firmware is finalized during manufacturing and does not require field reprogramming.

A microcontroller is a semiconductor integrated circuit that combines a CPU core, program memory, data memory, and peripherals on one device. The Z8 belongs to the microcontroller hierarchy, where it sits between a general-purpose processor and dedicated logic. Unlike a fixed-function controller, the Z86E3016PSC can implement application-specific behavior through firmware while keeping the external component count and board area comparatively low.

The principal published specifications identify an 8-bit architecture, a 16 MHz operating frequency, and 4 KB of OTP program memory. These three parameters establish the part’s fundamental design class: a compact, moderately clocked MCU for embedded-control logic rather than a high-compute application processor. Program storage is sufficient for production firmware containing control routines, state machines, communication handling, and peripheral coordination when the application does not require downloadable updates.

The Z8 architecture is positioned as an efficient embedded-control platform. Its 8-bit processing model and moderate clock rate can provide adequate responsiveness for motor, appliance, instrument, and interface-control duties while keeping power, timing, and memory requirements manageable. Exact timer, I/O, serial-interface, voltage, temperature, and electrical-limit details must be confirmed against the manufacturer datasheet before a schematic or firmware is released.

Typical use cases include small appliance controls, compact sensor interfaces, simple motor-control boards, keyboard or panel logic, and dedicated control subsystems. The 16 MHz clock provides a practical timing base for many event-driven control loops, while 4 KB of OTP firmware storage can be efficient for stable, fixed-function products. For connected or highly regulated products, verify the available communications peripherals and compliance requirements against the applicable product documentation.

The key design consideration is OTP suitability. One-time-programmable memory is appropriate when firmware is finalized before deployment and field updates are unnecessary; it is not the natural choice for products requiring frequent firmware updates or field-service reconfiguration. Confirm the exact package, pin count, pinout, electrical ratings, and programming procedure from the Zilog datasheet before laying out the PCB or ordering samples.

This page consolidates the confirmed Z86E3016PSC specifications, sourcing information, application guidance, and replacement analysis into an engineering-focused product record. It also separates verified core attributes from details that require datasheet confirmation, helping designers establish whether the Z8 MCU fits the architecture before beginning detailed schematic work.

חלופות תחליף ישיר עבור Z86E3016PSC — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם Z86E3016PSC (אותו גורם צורה וטביעת רגל).

Z86E3016PEC

✅ Drop-In
Zilog
📦 28-pin DIP
8-bit Z8 microcontroller · 16 MHz · OTP · 4 KB · 237 bytes · 24 · 4.5 V to 5.5 V · 2

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

Z86E3016PSC דירוגים מרביים ומאפיינים חשמליים

Microcontroller Family Z8
CPU Architecture 8-bit
Maximum Operating Frequency 16 MHz
Program Memory 4 KB
Program Memory Organization 4K × 8 bits
Program Memory Type OTP
תדר שעון מקסימלי 16 MHz
Program Memory Write Capability One-time programmable

מדריך תצורת פינים של Z86E3016PSC standard

תצורת פינים עבור Z86E3016PSC (מארזת standard). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת standard עבור Z86E3016PSC

אין נתוני פריסת פינים מפורטים עבור Z86E3016PSC.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

Z86E3016PSC מתאים עבור 6 יישוםs: Compact Appliance Controls, Simple Sensor Interface Boards, Small Motor and Relay Control, Dedicated Instrument Panel Logic, Fixed-Function Peripheral Controllers, Industrial Sequence and Interlock Logic.

🏭

Compact Appliance Controls

The Z86E3016PSC fits compact appliance controls that combine a modest 16 MHz clock with fixed production logic. Its 8-bit Z8 processor can implement state machines, button handling, timing sequences, and actuator-control routines within the available 4 KB of OTP program memory. This architecture is attractive when the appliance does not need downloadable firmware or extensive connectivity. Confirm the required GPIO count, timer channels, supply range, and power dissipation before finalizing the control board.

🧩

Simple Sensor Interface Boards

The Z86E3016PSC can serve as the controller for a small sensor interface that converts discrete inputs into control or reporting signals. The 16 MHz operating frequency is suitable for many polling, debouncing, thresholding, and actuation routines, while 4 KB of OTP provides room for a focused application program. It is best suited to fixed-format sensors whose signal conditioning is external. Confirm available I/O, timer channels, ADC requirements, and serial interfaces because those specifications are not established by the confirmed core product attributes.

⚡

Small Motor and Relay Control

The Z86E3016PSC is a plausible choice for small motor or relay-control subsystems where a deterministic 8-bit control loop and event-driven firmware are sufficient. Its 16 MHz clock can coordinate input debouncing, timing sequences, protection logic, and output-state transitions. The 4 KB OTP memory is appropriate when control behavior is fixed after production. The designer must verify timer resources, output-drive ratings, isolation requirements, flyback components, and thermal conditions; those electrical details cannot be inferred from the MCU frequency or memory capacity alone.

📺

Dedicated Instrument Panel Logic

For a dedicated panel or instrument submodule, the Z86E3016PSC can coordinate key scanning, indicator sequencing, timing, and simple status logic in an 8-bit control design. The 16 MHz clock provides a practical execution rate for responsive event handling, and the 4 KB OTP capacity favors production firmware that should not change in the field. Before selecting the device, verify LCD or LED driver requirements, matrix-scan capacity, available timers, input voltage, and the exact package footprint against the production schematic.

🔧

Fixed-Function Peripheral Controllers

The Z86E3016PSC is suitable for fixed-function peripheral controllers that translate a limited command set into electrical or mechanical outputs. Its 4 KB OTP program memory can store compact routines for sequencing, status monitoring, and fault handling, while the 8-bit architecture supports straightforward register-level programming. This use is most appropriate when no post-deployment firmware updates are needed. Validate peripheral pin multiplexing, timing resolution, watchdog behavior, reset requirements, and supply current before committing the design to production.

🏭

Industrial Sequence and Interlock Logic

The Z86E3016PSC can support industrial sequence and interlock logic when the control program is limited, deterministic, and finalized during manufacturing. The 16 MHz clock and 8-bit processor are adequate for coordinating discrete sensors, timing delays, relay outputs, and fault interlocks in a compact controller. The 4 KB OTP memory discourages designs requiring frequent firmware changes. Production use should verify operating-temperature limits, isolation, input thresholds, output drive capability, EMC considerations, and any industrial qualification requirements from the manufacturer documentation.

What is the Z86E3016PSC?
The Z86E3016PSC is an 8-bit Zilog Z8 microcontroller with a 16 MHz operating frequency and 4 KB of OTP program memory organized as 4K × 8 bits. It is designed for compact embedded-control products where fixed production firmware and efficient control logic are priorities. According to the Zilog Z86E3016PSC datasheet, the device belongs to the Z8 4K OTP Microcontroller family.
What are the key specifications of Z86E3016PSC that engineers should know?
The key Z86E3016PSC specifications are its 8-bit CPU architecture, 16 MHz operating frequency, and 4 KB of one-time-programmable program memory. The memory is organized as 4K × 8 bits and is intended for firmware that is finalized during production. The manufacturer datasheet identifies the component as a Z8 4K OTP microcontroller; detailed electrical limits and peripheral assignments should be taken from its pin-description and electrical-characteristics tables.
Where can I download the Z86E3016PSC datasheet PDF?
The Z86E3016PSC datasheet PDF is available through the product document links on this page, including the manufacturer-document copy hosted by DiGi Electronics. The Zilog datasheet is the controlling source for pin assignments, electrical characteristics, memory organization, timing, and programming instructions. Use the pin-description table when assigning PCB signals rather than inferring connections from the device family name.
Where can I find the Z86E3016PSC pinout?
The Z86E3016PSC pinout is documented in the pin-description section of the manufacturer datasheet. Confirm the package suffix and exposed lead assignments directly against that table before routing the PCB, because the same Z8 family can include parts with different package options and peripheral assignments. The package drawing and pin number should be treated as the authority for the exact PSC configuration.
What can replace the Z86E3016PSC?
The Z86E3016PSC does not have a confirmed drop-in replacement in the available cross-reference results. A replacement should match the exact package, pinout, memory size, memory technology, clock rate, interrupt architecture, peripheral set, voltage range, and programming method—not merely the 8-bit CPU class. Same-family Z8 devices with different suffixes may use another package or memory technology and therefore are not automatically board-compatible replacements.
Is there a pin-compatible Zilog equivalent to the Z86E3016PSC?
No pin-compatible Zilog equivalent is confirmed for the Z86E3016PSC. The available listings identify the original Z8 part but do not document a substitute with the same package and lead assignments. When evaluating another Z8 member, compare its package drawing, memory capacity and type, I/O map, timer resources, serial peripherals, operating voltage, and programming interface against the Z86E3016PSC datasheet before treating it as a replacement.
Is the Z86E3016PSC suitable for embedded-control applications?
The Z86E3016PSC is suitable for many compact embedded-control applications because it combines an 8-bit processor, a 16 MHz clock, and 4 KB of OTP program memory. It is particularly relevant where production firmware is stable and the design needs event-driven state-machine, timing, and peripheral-control functions. The final suitability decision also depends on required I/O count, analog functions, communications, supply voltage, and qualification requirements.
When should I choose the Z86E3016PSC for a new design?
Choose the Z86E3016PSC when an 8-bit embedded controller, 16 MHz operating speed, and 4 KB of fixed OTP firmware are sufficient for the product. It can simplify products that do not require downloadable updates, high-performance computation, or extensive data storage. Select a different MCU if the application needs more program memory, field reprogramming, greater I/O, advanced communications, or a smaller surface-mount footprint.
What is the difference between OTP and flash memory for Z86E3016PSC designs?
The Z86E3016PSC uses one-time-programmable memory rather than rewritable flash memory. OTP suits production firmware that should remain fixed after programming, but it does not support routine in-field firmware updates. A flash-memory MCU offers greater flexibility for product revisions, diagnostics, and field servicing. If update capability is essential, choose a device with sufficient rewritable program memory rather than designing an OTP update mechanism.
How much power does the Z86E3016PSC consume?
The operating and idle power consumption of the Z86E3016PSC must be taken from the manufacturer electrical-characteristics tables because no operating current is confirmed in the available product summaries. Evaluate consumption at the intended 16 MHz operating point and across the actual input-voltage and temperature range. Account for external pull-ups, sensors, indicators, and interface circuitry when calculating the complete board budget.
What is the lifecycle status of the Z86E3016PSC?
The Z86E3016PSC is currently represented by active distributor product listings, so it is treated as an active catalog part for sourcing and design reference. Lifecycle classifications can change after a product is purchased, and long-term supply planning should be confirmed through the Request a Quote form on this page. Request lot traceability, packaging details, and current lead-time information for the production quantity.
Where can I buy the Z86E3016PSC online?
The Z86E3016PSC can be requested through the Request a Quote form on this page, where the required quantity, target date, and packaging preferences should be stated. Current quotation, availability, and lead time should be confirmed for the exact manufacturer part number and suffix. Avoid accepting a family-level or functionally similar MCU without verifying that its package, memory, and pinout match.
What is the price of the Z86E3016PSC?
Use the Request a Quote form on this page for the current Z86E3016PSC quotation. No qualifying quantity-break price table for the exact part and suffix is present in the available source data, so no static price is asserted here. For production planning, include annual usage, forecast horizon, reel or tube requirements, and target delivery dates in the request.
What is the lead time and stock status for the Z86E3016PSC?
Current stock and lead time for the Z86E3016PSC should be requested through the Request a Quote form on this page. A distributor landing page alone does not establish a guaranteed inventory position, scheduled delivery date, or minimum order quantity. Provide consumption forecasts and required packaging details so the quote can be tied to a specific production plan.
How does the Z86E3016PSC compare with an 8-bit flash-memory MCU?
The Z86E3016PSC differs most clearly from an 8-bit flash-memory MCU in program-memory technology: its 4 KB is OTP, whereas flash can be rewritten. Both may use an 8-bit CPU, but memory technology, peripherals, package, clocking, and tool support determine interchangeability. Use the Z86E3016PSC for fixed production firmware and select a flash-memory MCU when updates, larger code images, or field-service flexibility are required.

נתוני עזר הנדסיים עבור Z86E3016PSC — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the Z86E3016PSC for a compact embedded-control design that specifically benefits from a Zilog Z8 MCU, an 8-bit CPU, a 16 MHz operating frequency, and 4 KB of OTP program memory. It is particularly appropriate when production firmware is stable and field updates are unnecessary. Confirm that the exact package, GPIO count, timers, serial interfaces, voltage range, and programming method meet the design before committing. Do not treat another Z8-family device as a drop-in substitute without comparing its package and pinout, memory type and capacity, peripheral map, clocking, and electrical limits. If the application requires downloadable updates, more than 4 KB of program storage, substantially greater processing performance, or a different package, select a flash-memory MCU with appropriate resources instead.

השוואה עם חלופות

פרמטר מוצר זה
Brand Zilog
Microcontroller Family Z8
CPU Architecture 8-bit
Maximum Operating Frequency 16 MHz
Program Memory Capacity 4 KB
Program Memory Organization 4K × 8 bits
Program Memory Technology OTP

מבדילים עיקריים

  • Purpose-built Z8 embedded-control architecture (לעומתNo confirmed drop-in alternative)
  • One-time-programmable production firmware (לעומתFlash-memory 8-bit MCUs)
  • Compact processor-class positioning (לעומתHigher-memory or higher-performance MCUs)

הערות תכנון

Treat the 4 KB OTP memory as a one-time programming decision, not a field-update feature. Map the complete firmware image, bootloader needs, constants, interrupt routines, and diagnostic paths before committing the device to production. If revisions or field upgrades are likely, move to a flash-memory MCU with an appropriate programming interface. A production test fixture must also prevent accidental repeated programming attempts that could damage an already programmed OTP device.

Budget the complete board power at the intended 16 MHz operating frequency rather than relying only on general MCU classifications. Include the Z86E3016PSC operating current, idle current, external pull-ups, sensors, indicators, drivers, and regulator losses in the system calculation. Verify the exact supply-voltage range, decoupling requirements, and power-consumption curves in the manufacturer electrical-characteristics tables before selecting the supply rail and bulk or ceramic capacitors.

Resolve the exact package, pin count, pin numbering, and exposed-terminal details from the manufacturer package drawing before schematic capture. Place required input and output decoupling capacitors adjacent to the corresponding power pins, maintain the recommended layout, and route sensitive clock or reset signals away from switching nodes. Because no confirmed pinout is available from the product listings, do not derive PCB connections from an assumed DIP or SOIC configuration.

Confirm all peripheral resources, interrupt vectors, timer channels, communication blocks, and programming signals against the Z86E3016PSC datasheet. A generic 8-bit, 16 MHz, 4 KB MCU description is insufficient to establish software compatibility with another Z8 device. Validate reset behavior, oscillator requirements, brownout handling, watchdog settings, and unused-pin states during hardware bring-up to prevent unintended startup or field failures.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The available product listings do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these requirements with the manufacturer before environmental or regulatory declarations are made.

הנתונים אומתו בתאריך: 2026-11-11 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

Z86E3016PSC Z86E3016PSC datasheet Z86E3016PSC datasheet pdf Z86E3016PSC pinout Z86E3016PSC equivalent Z86E3016PSC replacement Z86E3016PSC cross reference Z86E3016PSC footprint Zilog Z86E3016PSC Z86E3016PSC 16MHz Z86E3016PSC 4KB OTP Z86E3016PSC price Z86E3016PSC stock

רכיבים ומונחים קשורים

Zilog Z86E3016PSC Z8 Z8 4K OTP Microcontroller 8-bit microcontroller MCU embedded controller semiconductor one-time-programmable memory OTP 4K × 8 bits 16 MHz program memory firmware read-only memory industrial control appliance control sensor interface motor control instrument panel interlock logic fixed-function control Z8 family embedded-control system
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר