AD532KHZ vs AD532JHZ तुलना

विस्तृत दोनों ओर की तुलना AD532KHZ द्वारा Analog Devices और AD532JHZ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
AD532JHZ AD532JHZ - 4-Quadrant Analog Multiplier | Analog Devices

AD532JHZ - 4-Quadrant Analog Multiplier | Analog Devices

AD532JHZ ✗ जीवन की समाप्ति

विशेषता तुलना

पैरामीटर AD532KHZ AD532JHZ
ब्रांड Analog Devices Analog Devices
श्रेणी Amplifier ICs Amplifier ICs
लाइफसाइकिल स्थिति NRND उत्पादन बंद
Product Type Analog multiplier/divider IC Internally trimmed integrated circuit multiplier
Multiplier Architecture 4-quadrant —
Resolution Classification 4 bit —
Bandwidth 1 MHz —
Trim Type Internally trimmed —
पैकेज 10-pin TO-100 hermetically sealed metal can 10-pin TO-100
Total Pin Count 10 pins —
माउंटिंग प्रकार Through-hole Through-hole
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
सप्लाई वोल्टेज [DATA_NEEDED: supply voltage] ±15 V
Total Quiescent Current [DATA_NEEDED: quiescent current] —
Multiplier Gain Error [DATA_NEEDED: multiplier gain error] —
Nonlinearity [DATA_NEEDED: nonlinearity] —
Input Common-Mode Range [DATA_NEEDED: input common-mode range] —
Maximum Input Signal [DATA_NEEDED: maximum input signal] —
आउटपुट वोल्टेज रेंज [DATA_NEEDED: output voltage range] —
Operating Temperature Grade [DATA_NEEDED: operating temperature grade] —
RoHS स्थिति unknown [DATA_NEEDED: RoHS status]
REACH Status unknown [DATA_NEEDED: REACH status]
Lifecycle Recommendation Not recommended for new designs —
Multiplier Function — Four-quadrant analog multiplication
Divider Capability — Supported by analog feedback configuration
Specified Temperature — 25 °C
Minimum Load Resistance — 2 kΩ
Offset Voltage Configuration — Grounded unless otherwise noted
Package Type — TO-100-10
Packaging — Tube
Trim Method — Internal trimming
Device Class — Analog multiplier/divider IC
Product Status — Not recommended for new designs
Gain Error — [DATA_NEEDED: gain error]
Input Offset Voltage — [DATA_NEEDED: input offset voltage]
Output Offset Voltage — [DATA_NEEDED: output offset voltage]
Frequency Response — [DATA_NEEDED: frequency response]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध