अंतिम बार खरीदने की सूचना: AD532JHZ end-of-life के करीब है। अंतिम ऑर्डर तिथि: हमसे संपर्क करें. उपलब्ध वैकल्पिक पार्ट्स देखें →
Analog Devices

AD532JHZ - 4-Quadrant Analog Multiplier | Analog Devices

MPN: AD532JHZ ✗ जीवन की समाप्ति
±15 V Vdss 2 kΩ Rds(on) 10-pin TO-100 Package
न्यूनतम ऑर्डर मात्रा: 1 |

AD532JHZ अवलोकन

The Analog Devices AD532JHZ is an internally trimmed, four-quadrant integrated circuit multiplier designed for analog signal processing and instrumentation. It operates from dual supplies of ±15 V and is offered in a 10-pin TO-100 package. Its monolithic construction, internal trimming, and four-quadrant operation allow accurate product or quotient calculations without the external trim networks required by earlier modular multiplier designs.

An integrated circuit analog multiplier is a precision signal-processing component that multiplies two input voltages and produces an output proportional to their product. When used in a feedback arrangement with an analog divider, it can also perform division, squaring, root extraction, modulation, demodulation, and signal generation. The AD532 belongs to the broader analog multiplier and divider hierarchy within analog integrated circuits, where precision linear signal processing complements general-purpose amplifier functions.

The AD532JHZ combines four-quadrant operation with internal calibration. Four-quadrant capability means the product output can change polarity as either input crosses zero, a requirement for many modulation and control systems. Internal trimming reduces assembly complexity by eliminating external adjustment networks while preserving the factory-calibrated characteristics of the monolithic device. Its dual ±15 V supply also provides sufficient headroom for bipolar analog signals commonly encountered in laboratory and industrial control equipment.

The AD532 is specified at 25 °C with ±15 V supply rails and a minimum load resistance of 2 kΩ. These conditions are important when evaluating signal loading, output range, and accuracy because performance and usable output swing depend on the circuit configuration. The device is intended for precision multiplier and divider circuits, including analog control loops, measurement bridges, instrumentation channels, and modulation systems.

Typical uses include analog computation modules, laboratory measurement systems, industrial process-control equipment, and communication-signal processing. In each case, the AD532JHZ can implement multiplication directly and division through a closed-loop arrangement. Designers should account for supply polarity, input and output signal ranges, load impedance, grounding, and frequency-dependent accuracy when planning the surrounding analog network.

A primary design consideration is preserving the common reference and feedback-node behavior of the multiplier circuit. Incorrect grounding, inadequate return paths, or loading that violates the minimum 2 kΩ load condition can degrade performance. The 10-pin TO-100 package also requires adequate clearance and suitable thermal management because a through-hole package can be exposed to elevated internal temperature at sustained high dissipation.

This page combines manufacturer product information, technical search results, package details, lifecycle status, pricing evidence, and practical selection guidance. It also distinguishes genuine pin-compatible AD532 family alternatives from broader analog multipliers that may offer similar functions but cannot be assumed to share the same footprint or pinout.

के लिए ड्रॉप-इन विकल्प AD532JHZ — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं AD532JHZ (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Product Type.

Analog Devices
Package: 10-pin TO-100 hermetically sealed metal can
Product Type: Analog multiplier/divider IC
इसके साथ तुलना करें AD532JHZ →

AD532KHZ

✅ ड्रॉप-इन
Analog Devices
📦 TO-100-10
Analog multiplier/divider IC · 4-quadrant · 4 bit · 1 MHz · Internally trimmed · 10-pin TO-100 hermetically sealed metal can · 10 pins · Through-hole

कीमत के लिए संपर्क करें

डेटाशीट देखें →

AD532SH

✅ ड्रॉप-इन
Analog Devices
📦 TO-100-10
4-quadrant analog multiplier/divider · 1 MHz · Internally trimmed · Military grade · TO-100-10 metal can · 10 terminals · Through-hole · Hermetically sealed

कीमत के लिए संपर्क करें

डेटाशीट देखें →

AD532KH

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 TO-100-10
Same TO-100-10 package and multiplier function; the ordering suffix changes the device grade while the main characteristics remain consistent.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

AD532JH

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Analog Devices
📦 TO-100-10
Internally trimmed integrated-circuit analog multiplier · Analog multiplier or divider · 1 MHz · 45 V · 45 V/us · Internally trimmed · Commercial

कीमत के लिए संपर्क करें

डेटाशीट देखें →

AD532JHZ Maximum Ratings और Electrical Characteristics

Product Type Internally trimmed integrated circuit multiplier
Multiplier Function Four-quadrant analog multiplication
Divider Capability Supported by analog feedback configuration
सप्लाई वोल्टेज ±15 V
Specified Temperature 25 °C
Minimum Load Resistance 2 kΩ
Offset Voltage Configuration Grounded unless otherwise noted
पैकेज 10-pin TO-100
Package Type TO-100-10
माउंटिंग प्रकार Through-hole
Packaging Tube
Trim Method Internal trimming
Device Class Analog multiplier/divider IC
Product Status Not recommended for new designs

AD532JHZ to-100-10 पिन कॉन्फ़िगरेशन गाइड

AD532JHZ (to-100-10 पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

AD532JHZ के लिए to-100-10 पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: AD532JHZ.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

AD532JHZ के लिए उपयुक्त है 6 अनुप्रयोगs: Precision Analog Computation, Analog Divider Circuits, Instrumentation Signal Processing, Industrial Process Control, Modulation and Demodulation, Legacy Equipment Repair.

🧮

Precision Analog Computation

The AD532JHZ is suitable for analog computation modules that require the product of two bipolar input signals. Its four-quadrant operation allows the output polarity to follow the signs of both inputs, while internal trimming eliminates external calibration networks that would otherwise add components and adjustment effort. In a suitable feedback and reference network, the multiplier core provides a compact way to implement multiplication, scaling, and related control equations. The specified ±15 V supplies support traditional bipolar signal ranges, and the manufacturer lists a minimum load resistance of 2 kΩ. Designers should preserve that loading condition and establish an appropriate analog ground reference before the circuit is evaluated for accuracy.

📐

Analog Divider Circuits

The AD532JHZ can support divider and ratio-computation circuits when placed in an appropriate analog feedback arrangement. Its internally trimmed multiplier element reduces the number of external adjustment components compared with modular implementations, while four-quadrant behavior accommodates signals that change polarity. This makes the device useful in control and measurement systems where a denominator or reference signal varies dynamically. Application design must include the AD532 data sheet’s reference-network requirements, minimum 2 kΩ load condition, and ±15 V reference specification conditions. Stable feedback layout and grounded offset inputs are particularly important because parasitic resistance and high-impedance nodes can introduce errors in division ratios.

🧪

Instrumentation Signal Processing

The AD532JHZ fits laboratory and industrial instrumentation blocks that must multiply a measured signal by a scale factor, coefficient, or control variable. The monolithic, internally trimmed construction simplifies procurement of one calibrated multiplier rather than a modular assembly with several external trimmers. Four-quadrant operation is useful for bipolar sensor outputs and phase-sensitive measurements where the two inputs can have either polarity. The 10-pin TO-100 package provides through-hole assembly and adequate spacing for hand installation in legacy instruments. Engineers should pay attention to grounding, resistor accuracy, input levels, output loading, and thermal rise so that system error is dominated by the external precision components rather than layout noise.

🏭

Industrial Process Control

The AD532JHZ can be used in legacy process-control systems to calculate proportional products or implement feedback-controlled analog functions. Its four-quadrant behavior permits positive and negative process-error signals without switching the multiplier’s operating polarity manually. Internal trimming is particularly valuable in industrial equipment because it reduces external calibration hardware and assembly variation. The specified ±15 V dual supply aligns with conventional industrial analog signal-chain practices, although the circuit must observe the data sheet’s minimum 2 kΩ load requirement. For new installations, evaluate current-recommended precision analog products because the AD532 family is not recommended for new designs; for maintenance of existing equipment, exact ordering-code verification is essential.

🌐

Modulation and Demodulation

The AD532JHZ is suitable for product-modulation stages in bipolar signal-processing systems. Multiplying a message signal by a sinusoidal or switching reference produces a modulated product, while four-quadrant operation supports references and message signals with changing polarity. Its internally trimmed multiplier provides a compact monolithic implementation for laboratory transmitters, educational equipment, and legacy communications apparatus. The designer must keep signal amplitudes within the device’s operating limits and account for the minimum 2 kΩ load requirement at the output. PCB or chassis layout should minimize loop area around the multiplier, reference source, and feedback components because stray capacitance can affect modulation bandwidth and unwanted spectral products.

🔧

Legacy Equipment Repair

The AD532JHZ is primarily valuable for repairing or maintaining vintage analog instruments, laboratory equipment, and industrial controllers that already use the AD532 family. Because the part is supplied in a 10-pin TO-100 package and described as internally trimmed, an exact-ordering-code replacement can preserve the original circuit architecture when its specifications match. Technicians should compare the manufacturer ordering table, pin diagram, temperature grade, and operating conditions before installation. The component is not recommended for new designs, so long-term continuity planning should include lifecycle monitoring and an evaluation of currently recommended precision multiplier products. This page’s Request a Quote form is the appropriate route for current AD532JHZ supply and lead-time information.

अनुशंसित उत्पादों का सारांश

AD532KHZ Analog Devices उपयोग में: Precision Analog Computation, Instrumentation Signal Processing AD532SH Same-family TO-100-10 multiplier candidate उपयोग में: Analog Divider Circuits, Modulation and Demodulation AD532JH Same-family TO-100-10 legacy alternative उपयोग में: Industrial Process Control AD532KH Same-package AD532 family maintenance candidate उपयोग में: Legacy Equipment Repair
What is the AD532JHZ?
The AD532JHZ is an internally trimmed, four-quadrant integrated circuit analog multiplier from Analog Devices. According to the manufacturer product page, it is intended for precision multiplication and divider applications and uses a monolithic construction that eliminates the external trim networks associated with modular multipliers. The specified device is supplied in a 10-pin TO-100 package.
What is the supply voltage of the AD532JHZ?
The AD532JHZ operates from dual ±15 V supply rails for its published specification conditions. The manufacturer datasheet excerpt identifies VS = ±15 V and 25 °C as the reference conditions, with a minimum load resistance of 2 kΩ. These are specification conditions rather than a statement that the device can operate only at exactly ±15 V.
What does four-quadrant multiplier mean for AD532JHZ applications?
Four-quadrant operation allows the AD532JHZ output polarity to change when either input crosses zero. This makes the device suitable for bipolar modulation, demodulation, analog computation, and control circuits where signal polarity may be either positive or negative. The Analog Devices product page identifies the AD532 as a four-quadrant internally trimmed multiplier.
Is AD532JHZ suitable for division applications?
Yes, the AD532JHZ can be used in an analog feedback configuration to implement division and related functions. Its multiplier core provides the controllable element, while external resistors and feedback determine the mathematical operation. The AD532 family also includes dedicated divider functions, but the exact circuit and accuracy should be selected from the manufacturer’s application guidance.
Where can I download the AD532JHZ datasheet PDF?
The official AD532 product page provides the manufacturer’s current documentation, including the AD532 data sheet. A directly accessible manufacturer PDF is also identified in the product documentation search. Use the Analog Devices product page for revision-controlled documentation, and confirm that the downloaded document includes the AD532JHZ ordering code and its associated temperature grade.
Where can I find the AD532JHZ pinout?
The AD532JHZ pin assignment is published in the AD532 manufacturer data sheet’s pin-configuration and connection-diagram sections. The package is a 10-pin TO-100, and engineers should use the diagram associated with the specific ordering option rather than infer connections from a generic multiplier package. Assign tracks and pin numbering directly from that manufacturer drawing.
Is the AD532JHZ active or discontinued?
The AD532 is marked “NOT RECOMMENDED FOR NEW DESIGNS” by Analog Devices, so the AD532JHZ should be treated as an end-of-life legacy product. Existing designs may require lifecycle management, sourcing support, or a carefully qualified replacement. New designs should evaluate the manufacturer’s currently recommended analog signal-processing products.
What is the price of AD532JHZ?
Current price, stock, and lead-time information for AD532JHZ should be requested through the Request a Quote form on this page. The product is a legacy device and is not recommended for new designs, so availability and commercial terms can vary by quantity and packaging. Request the exact AD532JHZ ordering code when obtaining a quotation.
Where can I buy AD532JHZ online?
Use the Request a Quote form on this page to request AD532JHZ supply, current availability, and a quotation for the exact 10-pin TO-100 device. Because the manufacturer does not recommend the AD532 for new designs, buyers should also request lifecycle and traceability information before committing an existing production design to an order.
What is the lead time for AD532JHZ?
The current lead time for AD532JHZ should be confirmed through the Request a Quote form on this page. Lead time can depend on quantity, tube packaging, inventory position, and the lifecycle status of the exact ordering code. A formal quotation response is preferable to assuming that a legacy catalog listing reflects current factory availability.
Is AD532JHZ in stock?
AD532JHZ stock status should be requested through the Request a Quote form on this page using the exact MPN AD532JHZ. The device is a legacy analog multiplier, so stock may be limited or composed of remaining inventory rather than new production. Confirm quantity, date code, package condition, and traceability with the quotation.
AD532JHZ vs AD532KHZ: which multiplier is better for a legacy design?
AD532JHZ and AD532KHZ use the same 10-pin TO-100 multiplier package, and a cross-reference result describes their terminals, package, and principal characteristics as consistent. The ordering suffix normally identifies temperature grade or qualification, so the correct choice must be checked against the original BOM, operating-temperature requirements, and current availability. The manufacturer’s ordering table should control the final decision.
Can AD532KHZ replace AD532JHZ without PCB changes?
AD532KHZ can be considered a pin-compatible candidate because a cross-reference result identifies the same TO-100 package, consistent terminals, and matching main performance characteristics. Before substitution, verify the complete ordering information, temperature range, supply conditions, accuracy limits, and lifecycle status in the Analog Devices data sheet. No PCB changes should be assumed unless the exact manufacturer pin diagram confirms them.
When should I choose AD532JHZ instead of another AD532 family member?
Choose AD532JHZ when an existing design specifically calls for that ordering code and its documented temperature grade, package, and qualifications are acceptable. Because the AD532 is not recommended for new designs, use it primarily for repair, continuity, or previously qualified legacy systems. For a new design, compare currently recommended Analog Devices products rather than choosing solely by package.
What is the best drop-in replacement for AD532JHZ?
AD532KHZ is the best-supported drop-in candidate identified for AD532JHZ because it shares the 10-pin TO-100 package and is described as having consistent terminals and principal characteristics. Other grade variants may also fit, but no comprehensive five-part cross-reference was established. Verify the manufacturer ordering table and pin diagram before treating any alternate as production-approved.
What is the best Analog Devices equivalent for AD532JHZ?
For a mechanically compatible legacy upgrade, AD532KHZ is the closest identified Analog Devices equivalent because the available comparison describes the same 10-pin TO-100 package, consistent terminals, and matching main performance characteristics. For a completely new design, current Analog Devices precision multiplier products should be considered even if the footprint changes, because lifecycle status and long-term availability are important selection criteria.

के लिए इंजीनियरिंग संदर्भ डेटा AD532JHZ — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose AD532JHZ when repairing or maintaining an existing design that specifically specifies this ordering code and its temperature grade, package, and electrical conditions are acceptable. AD532KHZ is the best-supported direct maintenance candidate because the available comparison reports the same TO-100-10 package, consistent terminals, and matching principal characteristics. AD532SH, AD532KH, and AD532JH are additional same-family TO-100 candidates, but their exact ordering limits must be checked before substitution. Because Analog Devices marks the AD532 family as not recommended for new designs, it is generally better to evaluate current recommended precision multiplier products for new analog-computation, modulation, or instrumentation designs. A footprint-compatible legacy option is valuable for continuity, but it should not automatically be assumed to have identical temperature limits or long-term production availability.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद AD532KHZ AD532SH AD532KH AD532JH
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package TO-100-10 TO-100-10 TO-100-10 TO-100-10 TO-100-10
Function Four-quadrant analog multiplier/divider IC Four-quadrant analog multiplier/divider IC Four-quadrant analog multiplier/divider IC Four-quadrant analog multiplier/divider IC Four-quadrant analog multiplier/divider IC
Temperature Grade AD532JHZ ordering grade AD532KHZ ordering grade AD532SH ordering grade AD532KH ordering grade AD532JH ordering grade

मुख्य विशेषताएँ

  • Pin-compatible AD532 family maintenance path (बनामAD532KHZ)
  • Internal trimming reduces external adjustment (बनामAD532SH)
  • Four-quadrant bipolar multiplication in a through-hole package (बनामAD532JH)

डिज़ाइन नोट्स

Do not assume that any 10-pin multiplier is interchangeable with the AD532JHZ. Use the manufacturer pin-configuration drawing to verify signal inputs, reference terminals, offset-voltage grounding, and supply connections. The minimum load resistance is 2 kΩ under the stated specification conditions, so output buffers may be needed when the surrounding circuit presents a lower impedance.

Keep the multiplier’s reference and feedback components close to their associated terminals and use a low-impedance analog ground return. High-impedance nodes around the multiplier can pick up noise and introduce ratio errors, particularly in division and modulation circuits. Arrange input, feedback, and output paths to avoid crossing sensitive nodes and maintain a compact ground loop beneath the analog section.

The TO-100 package provides through-hole spacing but does not eliminate thermal-rise concerns. Check dissipation under the actual input, output, and feedback-network conditions, and provide copper area or a suitable heat path when operating continuously at elevated dissipation. Verify that airflow and enclosure temperature remain compatible with the selected ordering grade and the manufacturer’s operating-temperature limits.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements were identified. AEC-Q100 is not applicable because the AD532 is a general-purpose analog multiplier rather than an automotive-qualified device.

डेटा सत्यापन तिथि: 2026-11-18 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

AD532JHZ datasheet AD532JHZ datasheet pdf AD532JHZ pinout AD532JHZ equivalent AD532JHZ replacement AD532JHZ cross reference AD532JHZ price AD532JHZ stock Analog Devices AD532JHZ AD532JHZ TO-100-10 multiplier AD532JHZ vs AD532KHZ AD532JHZ analog computation

संबंधित कंपोनेंट्स और शब्द

Analog Devices AD532JHZ AD532KHZ AD532SH AD532KH AD532JH integrated circuit multiplier analog multiplier analog divider four-quadrant multiplier internally trimmed multiplier precision analog signal processing TO-100-10 TO-100 through-hole package monolithic integrated circuit analog computation modulation demodulation industrial process control laboratory instrumentation dual ±15 V supply minimum load resistance offset voltage product status
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें