AD620BNZ vs INA129P तुलना
विस्तृत दोनों ओर की तुलना AD620BNZ द्वारा Analog Devices और INA129P द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | AD620BNZ | INA129P |
|---|---|---|
| ब्रांड | Analog Devices | Texas Instruments |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Amplifier Type | Instrumentation Amplifier | — |
| Number of Circuits | 1 circuit | — |
| Gain Range | 1 to 10,000 | 1 to 10,000 |
| Gain Setting | 1 external resistor | — |
| Input Offset Voltage | 15 µV | — |
| Slew Rate | 1.2 V/µs | — |
| Bandwidth | 1 MHz | — |
| Supply Voltage Range | ±2.3 V to ±18 V | ±18 V |
| पैकेज | 8-pin PDIP | 8-pin plastic DIP (PDIP) |
| माउंटिंग प्रकार | Through-hole | Through-hole |
| Power Class | Low-power instrumentation amplifier | — |
| Input Offset Voltage Accuracy | [DATA_NEEDED: input offset voltage accuracy] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| आउटपुट वोल्टेज रेंज | [DATA_NEEDED: output voltage range] | — |
| सप्लाई करंट | [DATA_NEEDED: supply current] | — |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Product Type | — | Precision low-power instrumentation amplifier |
| Amplifier Circuit Count | — | 1 |
| Maximum Offset Voltage | — | 50 uV |
| Maximum Offset Drift | — | 0.5 uV/°C |
| Maximum Input Bias Current | — | 5 nA |
| Minimum Common-Mode Rejection | — | 120 dB |
| Input Protection | — | ±40 V |
| Bandwidth at Gain 100 | — | 200 kHz |
| Architecture | — | Three-op-amp instrumentation-amplifier design |
| Gain Adjustment | — | Single external resistor |
| Temperature Range | — | -40°C to +85°C |
| Low-Power Feature | — | Low-power instrumentation-amplifier design |
| Current Feedback | — | Yes |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |