AD620BNZ vs INA129P So sánh
So sánh chi tiết song song của AD620BNZ bằng Analog Devices và INA129P bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
So sánh thông số kỹ thuật
| Tham số | AD620BNZ | INA129P |
|---|---|---|
| Thương hiệu | Analog Devices | Texas Instruments |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Amplifier Type | Instrumentation Amplifier | — |
| Number of Circuits | 1 circuit | — |
| Gain Range | 1 to 10,000 | 1 to 10,000 |
| Gain Setting | 1 external resistor | — |
| Input Offset Voltage | 15 µV | — |
| Slew Rate | 1.2 V/µs | — |
| Bandwidth | 1 MHz | — |
| Supply Voltage Range | ±2.3 V to ±18 V | ±18 V |
| Hộp | 8-pin PDIP | 8-pin plastic DIP (PDIP) |
| Kiểu lắp đặt | Through-hole | Through-hole |
| Power Class | Low-power instrumentation amplifier | — |
| Input Offset Voltage Accuracy | [DATA_NEEDED: input offset voltage accuracy] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| Khoảng điện áp đầu ra | [DATA_NEEDED: output voltage range] | — |
| Điện áp cung cấp | [DATA_NEEDED: supply current] | — |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Product Type | — | Precision low-power instrumentation amplifier |
| Amplifier Circuit Count | — | 1 |
| Maximum Offset Voltage | — | 50 uV |
| Maximum Offset Drift | — | 0.5 uV/°C |
| Maximum Input Bias Current | — | 5 nA |
| Minimum Common-Mode Rejection | — | 120 dB |
| Input Protection | — | ±40 V |
| Bandwidth at Gain 100 | — | 200 kHz |
| Architecture | — | Three-op-amp instrumentation-amplifier design |
| Gain Adjustment | — | Single external resistor |
| Temperature Range | — | -40°C to +85°C |
| Low-Power Feature | — | Low-power instrumentation-amplifier design |
| Current Feedback | — | Yes |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |