AD676BD vs AD676JN तुलना
विस्तृत दोनों ओर की तुलना AD676BD द्वारा Analog Devices और AD676JN द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | AD676BD | AD676JN |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | ADC/DAC | ADC/DAC |
| लाइफसाइकिल स्थिति | Unknown | अंतिम बार खरीदें |
| ADC Type | Successive-approximation sampling ADC | — |
| Architecture | Switched-capacitor charge redistribution | SAR (Successive Approximation Register) |
| रेज़ोल्यूशन | 16 bit | — |
| सैंपलिंग रेट | 100 kSPS | 100 kSPS |
| Conversion Time | 10 us | 10 us |
| Input Channels | 1 input | 1 single-ended |
| Output Format | 16-bit parallel output | — |
| Output Codes | No missing codes | — |
| Integral Nonlinearity | 1 LSB | — |
| Total Harmonic Distortion | 97 dB | — |
| Signal-to-Noise Plus Distortion Ratio | 90 dB | — |
| Full-Power Bandwidth | 1 MHz | — |
| On-Chip Sample-and-Hold | Included | — |
| Autocalibration | On-chip autocalibration | On-chip, automatic on power-up and on CAL command |
| पैकेज | 28-pin SBCDIP | 28-pin PDIP (Plastic DIP, 0.600 inch / 15.24 mm) |
| माउंटिंग प्रकार | Through-hole | Through-Hole (DIP) |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Number of Bits | — | 16 |
| Data Interface | — | Parallel (16-bit) |
| Input Type | — | Single-Ended, unipolar or bipolar (pin-strapped) |
| Integral Nonlinearity (INL) | — | 1 LSB max (no missing codes) |
| Total Harmonic Distortion (THD) | — | -97 dB |
| Signal-to-Noise Ratio (SNR) | — | 90 dB |
| ऑपरेटिंग तापमान | — | 0 C to +70 C |
| Packaging | — | Tube |
| Sample-and-Hold | — | On-chip |