AD676BD vs AD676JN 比較
詳細並排比較 AD676BD 由 Analog Devices 與 AD676JN 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | AD676BD | AD676JN |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 類別 | ADC/DAC | ADC/DAC |
| 生命週期狀態 | Unknown | 最後購買 |
| ADC Type | Successive-approximation sampling ADC | — |
| Architecture | Switched-capacitor charge redistribution | SAR (Successive Approximation Register) |
| 解析度 | 16 bit | — |
| 取樣率 | 100 kSPS | 100 kSPS |
| Conversion Time | 10 us | 10 us |
| Input Channels | 1 input | 1 single-ended |
| Output Format | 16-bit parallel output | — |
| Output Codes | No missing codes | — |
| Integral Nonlinearity | 1 LSB | — |
| Total Harmonic Distortion | 97 dB | — |
| Signal-to-Noise Plus Distortion Ratio | 90 dB | — |
| Full-Power Bandwidth | 1 MHz | — |
| On-Chip Sample-and-Hold | Included | — |
| Autocalibration | On-chip autocalibration | On-chip, automatic on power-up and on CAL command |
| 封裝 | 28-pin SBCDIP | 28-pin PDIP (Plastic DIP, 0.600 inch / 15.24 mm) |
| 安裝類型 | Through-hole | Through-Hole (DIP) |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Number of Bits | — | 16 |
| Data Interface | — | Parallel (16-bit) |
| Input Type | — | Single-Ended, unipolar or bipolar (pin-strapped) |
| Integral Nonlinearity (INL) | — | 1 LSB max (no missing codes) |
| Total Harmonic Distortion (THD) | — | -97 dB |
| Signal-to-Noise Ratio (SNR) | — | 90 dB |
| 工作溫度 | — | 0 C to +70 C |
| Packaging | — | Tube |
| Sample-and-Hold | — | On-chip |