AD977AR vs AD977AAR तुलना

विस्तृत दोनों ओर की तुलना AD977AR द्वारा Analog Devices और AD977AAR द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
AD977AAR AD977AAR - 16-Bit 200 kSPS Serial ADC | Analog Devices

AD977AAR - 16-Bit 200 kSPS Serial ADC | Analog Devices

AD977AAR ✓ सक्रिय

विशेषता तुलना

पैरामीटर AD977AR AD977AAR
ब्रांड Analog Devices Analog Devices
श्रेणी ADC/DAC ADC/DAC
लाइफसाइकिल स्थिति Unknown सक्रिय
ADC Type Successive-approximation switched-capacitor ADC —
रेज़ोल्यूशन 16 bit 16 bit
Input Channels 1 input —
Input Type Single ended Unipolar and bipolar
Throughput Rate 100 kSPS for AD977; 200 kSPS for AD977A 200 kSPS
सप्लाई वोल्टेज 5 V single supply 5 V single supply
Internal Reference 2.5 V internal reference —
Reference Type External or internal —
Data Interface High-speed serial interface —
Input Ranges Unipolar: 0 V to 5 V and 0 V to 4 V; bipolar: ±5 V and ±3.3 V —
Power Dissipation 100 mW maximum 100 mW maximum
Power-Down Mode Available 50 uW
Factory Calibration Factory calibrated —
पैकेज 20-pin SOIC 20-SOIC
माउंटिंग स्टाइल Surface mount —
Series AD977 —
Operating Voltage [DATA_NEEDED: operating voltage range] —
ऑपरेटिंग तापमान [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Analog Input Absolute Maximum Voltage [DATA_NEEDED: analog input absolute maximum voltage] —
ENOB [DATA_NEEDED: effective number of bits] —
SNR [DATA_NEEDED: signal-to-noise ratio] [DATA_NEEDED: signal-to-noise ratio]
INL [DATA_NEEDED: integral nonlinearity] —
DNL [DATA_NEEDED: differential nonlinearity] —
Input Impedance [DATA_NEEDED: input impedance] —
Sampling Capacitance [DATA_NEEDED: sampling capacitance] —
Serial Interface Mode [DATA_NEEDED: serial interface mode] —
Lead Length [DATA_NEEDED: lead length] —
RoHS स्थिति unknown [DATA_NEEDED: RoHS status]
REACH Status unknown [DATA_NEEDED: REACH status]
AEC-Q100 Qualification not_applicable [DATA_NEEDED: AEC-Q100 qualification]
MSL [DATA_NEEDED: moisture sensitivity level] —
Tube Standard Quantity [DATA_NEEDED: standard tube quantity] —
Converter Architecture — Successive approximation
Unipolar Input Range — 0 V to 5 V or 0 V to 4 V
Bipolar Input Range — ±5 V or ±3.3 V
इंटरफ़ेस — Serial I/O
Input Count — 1 input
माउंटिंग प्रकार — Surface mount
THD — [DATA_NEEDED: total harmonic distortion]
Offset Error — [DATA_NEEDED: offset error]
Gain Error — [DATA_NEEDED: gain error]
Linearity — [DATA_NEEDED: integral and differential linearity]
Reference — [DATA_NEEDED: reference voltage]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध