AD977AR vs AD977AAR So sánh

So sánh chi tiết song song của AD977AR bằng Analog Devices và AD977AAR bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
AD977AAR AD977AAR - 16-Bit 200 kSPS Serial ADC | Analog Devices

AD977AAR - 16-Bit 200 kSPS Serial ADC | Analog Devices

AD977AAR ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số AD977AR AD977AAR
Thương hiệu Analog Devices Analog Devices
Danh mục ADC/DAC ADC/DAC
Trạng thái vòng đời Unknown Hoạt động
ADC Type Successive-approximation switched-capacitor ADC —
Độ phân giải 16 bit 16 bit
Input Channels 1 input —
Input Type Single ended Unipolar and bipolar
Throughput Rate 100 kSPS for AD977; 200 kSPS for AD977A 200 kSPS
Điện áp cung cấp 5 V single supply 5 V single supply
Internal Reference 2.5 V internal reference —
Reference Type External or internal —
Data Interface High-speed serial interface —
Input Ranges Unipolar: 0 V to 5 V and 0 V to 4 V; bipolar: ±5 V and ±3.3 V —
Power Dissipation 100 mW maximum 100 mW maximum
Power-Down Mode Available 50 uW
Factory Calibration Factory calibrated —
Hộp 20-pin SOIC 20-SOIC
Kiểu lắp đặt Surface mount —
Series AD977 —
Operating Voltage [DATA_NEEDED: operating voltage range] —
Nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Analog Input Absolute Maximum Voltage [DATA_NEEDED: analog input absolute maximum voltage] —
ENOB [DATA_NEEDED: effective number of bits] —
SNR [DATA_NEEDED: signal-to-noise ratio] [DATA_NEEDED: signal-to-noise ratio]
INL [DATA_NEEDED: integral nonlinearity] —
DNL [DATA_NEEDED: differential nonlinearity] —
Input Impedance [DATA_NEEDED: input impedance] —
Sampling Capacitance [DATA_NEEDED: sampling capacitance] —
Serial Interface Mode [DATA_NEEDED: serial interface mode] —
Lead Length [DATA_NEEDED: lead length] —
Trạng thái RoHS unknown [DATA_NEEDED: RoHS status]
REACH Status unknown [DATA_NEEDED: REACH status]
AEC-Q100 Qualification not_applicable [DATA_NEEDED: AEC-Q100 qualification]
MSL [DATA_NEEDED: moisture sensitivity level] —
Tube Standard Quantity [DATA_NEEDED: standard tube quantity] —
Converter Architecture — Successive approximation
Unipolar Input Range — 0 V to 5 V or 0 V to 4 V
Bipolar Input Range — ±5 V or ±3.3 V
Giao diện — Serial I/O
Input Count — 1 input
Kiểu lắp đặt — Surface mount
THD — [DATA_NEEDED: total harmonic distortion]
Offset Error — [DATA_NEEDED: offset error]
Gain Error — [DATA_NEEDED: gain error]
Linearity — [DATA_NEEDED: integral and differential linearity]
Reference — [DATA_NEEDED: reference voltage]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá