ADC12040CIVY vs ADC12DL066CIVS तुलना
विस्तृत दोनों ओर की तुलना ADC12040CIVY द्वारा Texas Instruments और ADC12DL066CIVS द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
ADC12040CIVY - 12-Bit 40MSPS Pipelined ADC | Texas Instruments
ADC12040CIVY ✓ सक्रिय
विशेषता तुलना
| पैरामीटर | ADC12040CIVY | ADC12DL066CIVS |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | ADC/DAC | ADC/DAC |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| रेज़ोल्यूशन | 12 bit | 12 bits |
| सैंपलिंग रेट | 40 MSPS (min 40 MSPS over temperature) | — |
| Number of Channels | 1 input | 2 (simultaneous sampling) |
| Architecture | Pipelined | Pipelined |
| सप्लाई वोल्टेज | +5V ±5% (single supply) | — |
| Power Consumption | 340 mW (typ) at 40 MHz | — |
| Differential Non-Linearity (DNL) | ±0.4 LSB (typ) | +/-0.5 LSB (typ) |
| Signal-to-Noise Ratio (SNR) | 69 dB (typ) at fIN = 10 MHz | — |
| Effective Number of Bits (ENOB) | 11.2 bits (typ) at fIN = 10 MHz | — |
| Input Type | Differential (single-ended capable) | — |
| Reference Type | External, with internal buffer | — |
| Digital Output Interface | Parallel, CMOS, straight binary | — |
| Digital Output Logic Levels | 2.35V to 5V compatible | — |
| Power Down Mode | On-chip (low quiescent between conversions) | Yes |
| ऑपरेटिंग तापमान रेंज | -40C to +85C (industrial) | -40C to +85C |
| पैकेज | 32-LQFP (NEY) 7x7 mm | 64-TQFP (PAG) 10x10 mm |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| Pin Family Compatibility | Pin compatible with ADC12010, ADC12020, ADC12L063, ADC12L066 | — |
| RoHS स्थिति | Compliant (NOPB suffix variants only; check exact suffix) | Compliant (NOPB suffix) |
| Sample Rate (per channel) | — | 66 MSPS |
| Input Bandwidth | — | 450 MHz |
| Supply Voltage (Analog) | — | 3.3 V (single supply) |
| Digital I/O Supply | — | 2.4 V to 3.3 V |
| Signal-to-Noise Ratio (SNR, fIN=10 MHz) | — | 66 dB (typ) |
| Spurious-Free Dynamic Range (SFDR, fIN=10 MHz) | — | [DATA_NEEDED: SFDR specific value] |
| Reference | — | Internal (with external option) |
| Output Format | — | Choice of Binary or 2's Complement |
| Pin Compatibility | — | Drop-in compatible with ADC12D040 |