ADM2461EBRWZ-RL vs ADM2561EBRNZ तुलना
विस्तृत दोनों ओर की तुलना ADM2461EBRWZ-RL द्वारा Analog Devices और ADM2561EBRNZ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Analog Devices
ADM2461EBRWZ-RL - 500kbps Isolated RS-485/RS-422 Transceiver | ADI
ADM2461EBRWZ-RL ✓ सक्रिय
विशेषता तुलना
| पैरामीटर | ADM2461EBRWZ-RL | ADM2561EBRNZ |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Isolated RS-485 / RS-422 Transceiver | — |
| Protocol | RS-422, RS-485 | RS-422, RS-485 (TIA/EIA-485-A, ISO 8482:1987) |
| Number of Drivers/Receivers | 1/1 | 2/2 |
| Duplex | Half Duplex | Full / Half |
| Maximum Data Rate | 500 kbps | — |
| Isolation Voltage (rms) | 5.7 kV rms | — |
| ESD Protection (Bus Pins) | ±15 kV IEC (HBM:Human Body Model per IEC 61000-4-2) | — |
| Receiver Hysteresis | 30 mV typical | — |
| Unit Load | 1/8 (up to 256 nodes) | 1/8 unit load (up to 256 nodes on bus) |
| Supply Voltage - Logic Side (VDD1) | 3.0 V to 5.5 V | — |
| Supply Voltage - Bus Side (VDD2) | 3.0 V to 5.5 V (isolated, supplied by internal DC-DC driver) | — |
| Common-Mode Voltage Range | -25 V to +25 V | — |
| ऑपरेटिंग तापमान | -40C to +85C | — |
| पैकेज | 16-SOIC_W (Wide Body, 7.5 mm creepage) | 28-pin SOIC-W-FP (wide-body SOIC with exposed pad) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| MSL स्तर | 3 | — |
| RoHS स्थिति | Compliant | Compliant |
| फ़ंक्शन | — | Isolated RS-485/RS-422 transceiver (full- and half-duplex) with integrated isolated DC-DC converter |
| डेटा दर | — | 25 Mbps |
| Isolation Voltage (RMS, 60s) | — | 3 kV |
| ESD Protection (bus pins, IEC 61000-4-2) | — | ±15 kV |
| Supply Voltage (logic side) | — | 3.0 V to 5.5 V |
| Integrated Isolated DC-DC | — | Yes (isoPower) |
| Hot-Swap Tolerant | — | Yes |
| ऑपरेटिंग तापमान रेंज | — | -40C to +105C |
| Safety / Regulatory | — | UL 1577 basic insulation; IEC 61000-4-2 ESD; 8 mm creepage/clearance on PCB |