ADM2567EBRNZ vs MAX14882AWE+T तुलना
विस्तृत दोनों ओर की तुलना ADM2567EBRNZ द्वारा Analog Devices और MAX14882AWE+T द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Analog Devices
ADM2567EBRNZ - 3 kV Isolated RS-485 Transceiver, 25 Mbps | Analog Devices
ADM2567EBRNZ ✓ सक्रियAnalog Devices
MAX14882AWE+T - 5kVRMS Isolated CAN Transceiver | Analog Devices
MAX14882AWE+T ✓ सक्रियविशेषता तुलना
| पैरामीटर | ADM2567EBRNZ | MAX14882AWE+T |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Isolation Voltage | 3000 V rms | 5 kVRMS |
| Data Rate (max) | 25 Mbps | — |
| Number of Channels | 4 (signal isolation) | — |
| Common-Mode Transient Immunity (CMTI) | 250 kV/us | — |
| Bus ESD (IEC 61000-4-2, contact) | ±15 kV (bus pins) | — |
| Bus ESD (IEC 61000-4-2, air) | ±15 kV | — |
| A/B/Y/Z ESD (IEC 61000-4-2, contact) | ±6 kV | — |
| Protocol | RS-422 / RS-485 | — |
| Logic-Side Supply (VIO) | 1.7 V to 5.5 V | — |
| Integrated Isolated DC-DC | Yes (isoPower) | — |
| पैकेज | 28-pin SOIC-W (0.295", 7.50 mm body width) | 16-pin Wide-body SOIC (W SOIC) |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: Operating temperature range] | -40 C to +125 C |
| Compliance | ANSI/TIA/EIA-485-A-98, ISO 8482:1987 (E) | — |
| RoHS स्थिति | Compliant | Compliant |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| Number of Drivers / Receivers | 1 / 1 | — |
| फ़ंक्शन | — | Isolated high-speed CAN transceiver |
| डेटा दर | — | 1 Mbps |
| Controller-side Supply (VDDA) | — | 3.0 V to 5.5 V |
| Bus-side Supply (VDDB) | — | 4.5 V to 5.5 V |
| Receiver Input Common-Mode Range | — | -25 V to +25 V |
| Bus Fault Tolerance (CANH/CANL) | — | +/-54 V |
| ESD Protection (Bus-side, HBM) | — | +/-15 kV |
| Integrated LDO Output Current | — | 300 mA (max), 130 mA to internal load |
| Number of Drivers/Receivers | — | 1/1 (Half-Duplex CAN) |
| Creepage and Clearance | — | 8 mm |
| Standard | — | ISO 11898-2 compliant CAN |