ADM485ARZ vs SP485BN-L तुलना
विस्तृत दोनों ओर की तुलना ADM485ARZ द्वारा Analog Devices और SP485BN-L द्वारा Sipex. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ सक्रियविशेषता तुलना
| पैरामीटर | ADM485ARZ | SP485BN-L |
|---|---|---|
| ब्रांड | Analog Devices | Sipex |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Type | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| सप्लाई वोल्टेज | 5 V (single supply) | — |
| डेटा दर | 5 Mbps (max) | Up to 5 Mbps |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis] | — |
| Common-Mode Range | -7 V to +12 V | — |
| Driver Differential Output | [DATA_NEEDED: VOD min/max] | — |
| ऑपरेटिंग तापमान रेंज | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| पैकेज | SOIC-8 (SO-8) / SO-8 | 8-pin SOIC |
| माउंटिंग प्रकार | Surface Mount | [DATA_NEEDED: mounting type] |
| ESD Protection | [DATA_NEEDED: ESD HBM rating] | — |
| RoHS स्थिति | Compliant | RoHS listed in distributor product reference |
| REACH Status | Unaffected | [DATA_NEEDED: REACH status] |
| MSL स्तर | 1 (Unlimited) | — |
| Compliance | ROHS3 Compliant | — |
| Enable Pins | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) | — |
| Product Type | — | Half-duplex RS-485/RS-422 transceiver |
| Interface Standards | — | RS-485 and RS-422 |
| Architecture | — | BiCMOS |
| Receiver Unit Load | — | 1/10 unit load |
| Duplex Mode | — | Half-duplex |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Output Differential Voltage | — | [DATA_NEEDED: output differential voltage] |
| Receiver Input Sensitivity | — | [DATA_NEEDED: receiver input sensitivity] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Driver Enable Control | — | [DATA_NEEDED: DE control electrical specification] |
| Receiver Enable Control | — | [DATA_NEEDED: /RE control electrical specification] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |