ADM485ARZ vs SP485BN-L Perbandingan
Perbandingan bersamaan detil ADM485ARZ dari Analog Devices dan SP485BN-L dari Sipex. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | ADM485ARZ | SP485BN-L |
|---|---|---|
| Merek | Analog Devices | Sipex |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Type | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Tegangan Pemuat | 5 V (single supply) | — |
| Laju Data | 5 Mbps (max) | Up to 5 Mbps |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis] | — |
| Common-Mode Range | -7 V to +12 V | — |
| Driver Differential Output | [DATA_NEEDED: VOD min/max] | — |
| Rentang Suhu Kerja | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| Paket | SOIC-8 (SO-8) / SO-8 | 8-pin SOIC |
| Tipe Mounting | Surface Mount | [DATA_NEEDED: mounting type] |
| ESD Protection | [DATA_NEEDED: ESD HBM rating] | — |
| Status RoHS | Compliant | RoHS listed in distributor product reference |
| REACH Status | Unaffected | [DATA_NEEDED: REACH status] |
| Level MSL | 1 (Unlimited) | — |
| Compliance | ROHS3 Compliant | — |
| Enable Pins | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) | — |
| Product Type | — | Half-duplex RS-485/RS-422 transceiver |
| Interface Standards | — | RS-485 and RS-422 |
| Architecture | — | BiCMOS |
| Receiver Unit Load | — | 1/10 unit load |
| Duplex Mode | — | Half-duplex |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Output Differential Voltage | — | [DATA_NEEDED: output differential voltage] |
| Receiver Input Sensitivity | — | [DATA_NEEDED: receiver input sensitivity] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Driver Enable Control | — | [DATA_NEEDED: DE control electrical specification] |
| Receiver Enable Control | — | [DATA_NEEDED: /RE control electrical specification] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |