ADM485JNZ vs MAX485EESA+T तुलना

विस्तृत दोनों ओर की तुलना ADM485JNZ द्वारा Analog Devices और MAX485EESA+T द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
ADM485JNZ ADM485JNZ - 5V 5Mbps RS-485/422 Transceiver | Analog Devices

ADM485JNZ - 5V 5Mbps RS-485/422 Transceiver | Analog Devices

ADM485JNZ ✓ सक्रिय
Analog Devices
MAX485EESA+T MAX485EESA+T - 2.5Mbps RS-485 Transceiver | Analog Devices

MAX485EESA+T - 2.5Mbps RS-485 Transceiver | Analog Devices

MAX485EESA+T ✓ सक्रिय

विशेषता तुलना

पैरामीटर ADM485JNZ MAX485EESA+T
ब्रांड Analog Devices Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Transceiver Configuration 1 transmitter and 1 receiver —
Supported Protocols EIA RS-485 and EIA RS-422 —
Supply Voltage Range 4.75 V to 5.25 V 4.75 V to 5.25 V
Maximum Data Rate 5 Mbps 2.5 Mbps
Bus Common-Mode Range +12 V —
Logic Interface Differential driver and differential receiver —
Driver Enable Control Logic-controlled input —
Receiver Enable Control Logic-controlled input —
Circuit Technology Low-power BiCMOS —
Thermal Protection Thermal shutdown protection —
Output Protection Short-circuit protection —
Package Type 8-pin PDIP —
Package Pitch 7.62 mm —
Package Form Factor 8-DIP, 0.300 inch —
Packaging Tube —
माउंटिंग प्रकार Through-hole Surface mount
RoHS स्थिति ROHS3 compliant [DATA_NEEDED: RoHS status]
Minimum Operating Temperature [DATA_NEEDED: minimum operating temperature] —
Maximum Operating Temperature [DATA_NEEDED: maximum operating temperature] —
Maximum Supply Current [DATA_NEEDED: maximum supply current] —
Propagation Delay [DATA_NEEDED: driver and receiver propagation delay] —
Differential Input Sensitivity [DATA_NEEDED: differential input sensitivity] —
Product Type — Half-duplex RS-485/RS-422 transceiver
Nominal Supply Voltage — 5 V
Driver Output Type — Slew-rate-limited differential driver
Receiver Output Type — Differential logic-level receiver
ESD Protection — ±15 kV
Communication Mode — Half-duplex
Supported Standards — RS-485 and RS-422
पैकेज — 8-pin NSOIC/SOIC
ऑपरेटिंग तापमान रेंज — -40 °C to +85 °C
Driver and Receiver Count — 1 driver and 1 receiver
Power Classification — Low-power transceiver
REACH Status — [DATA_NEEDED: REACH status]
MSL — [DATA_NEEDED: moisture sensitivity level]
Maximum Bus Length — [DATA_NEEDED: maximum bus length]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध