ADM485JNZ vs MAX485EESA+T So sánh

So sánh chi tiết song song của ADM485JNZ bằng Analog Devices và MAX485EESA+T bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
ADM485JNZ ADM485JNZ - 5V 5Mbps RS-485/422 Transceiver | Analog Devices

ADM485JNZ - 5V 5Mbps RS-485/422 Transceiver | Analog Devices

ADM485JNZ ✓ Hoạt động
Analog Devices
MAX485EESA+T MAX485EESA+T - 2.5Mbps RS-485 Transceiver | Analog Devices

MAX485EESA+T - 2.5Mbps RS-485 Transceiver | Analog Devices

MAX485EESA+T ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số ADM485JNZ MAX485EESA+T
Thương hiệu Analog Devices Analog Devices
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Transceiver Configuration 1 transmitter and 1 receiver —
Supported Protocols EIA RS-485 and EIA RS-422 —
Supply Voltage Range 4.75 V to 5.25 V 4.75 V to 5.25 V
Maximum Data Rate 5 Mbps 2.5 Mbps
Bus Common-Mode Range +12 V —
Logic Interface Differential driver and differential receiver —
Driver Enable Control Logic-controlled input —
Receiver Enable Control Logic-controlled input —
Circuit Technology Low-power BiCMOS —
Thermal Protection Thermal shutdown protection —
Output Protection Short-circuit protection —
Package Type 8-pin PDIP —
Package Pitch 7.62 mm —
Package Form Factor 8-DIP, 0.300 inch —
Packaging Tube —
Kiểu lắp đặt Through-hole Surface mount
Trạng thái RoHS ROHS3 compliant [DATA_NEEDED: RoHS status]
Minimum Operating Temperature [DATA_NEEDED: minimum operating temperature] —
Maximum Operating Temperature [DATA_NEEDED: maximum operating temperature] —
Maximum Supply Current [DATA_NEEDED: maximum supply current] —
Propagation Delay [DATA_NEEDED: driver and receiver propagation delay] —
Differential Input Sensitivity [DATA_NEEDED: differential input sensitivity] —
Product Type — Half-duplex RS-485/RS-422 transceiver
Nominal Supply Voltage — 5 V
Driver Output Type — Slew-rate-limited differential driver
Receiver Output Type — Differential logic-level receiver
ESD Protection — ±15 kV
Communication Mode — Half-duplex
Supported Standards — RS-485 and RS-422
Hộp — 8-pin NSOIC/SOIC
Khoảng nhiệt độ hoạt động — -40 °C to +85 °C
Driver and Receiver Count — 1 driver and 1 receiver
Power Classification — Low-power transceiver
REACH Status — [DATA_NEEDED: REACH status]
MSL — [DATA_NEEDED: moisture sensitivity level]
Maximum Bus Length — [DATA_NEEDED: maximum bus length]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá