ADS8341E vs ADS8343EB तुलना
विस्तृत दोनों ओर की तुलना ADS8341E द्वारा Texas Instruments और ADS8343EB द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | ADS8341E | ADS8343EB |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | ADC/DAC | ADC/DAC |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| रेज़ोल्यूशन | 16 bit | 16 bit |
| Input Channels | 4 single-ended or 2 differential channels | — |
| Conversion Rate | 100 kHz | 100 kHz |
| Signal-to-Noise and Distortion Ratio | 86 dB SINAD | — |
| Architecture | Successive-approximation sampling ADC | — |
| Output Interface | Synchronous serial interface | — |
| Typical Supply Condition | 5 V | — |
| Typical Power Dissipation | 8 mW at 100 kHz throughput and 5 V supply | 8 mW at 100 kHz throughput with 5 V supply |
| ऑपरेटिंग तापमान रेंज | -40 °C to +85 °C | -40 °C to +85 °C |
| पैकेज | SSOP-16 | SSOP-16 |
| माउंटिंग प्रकार | Surface mount | Surface mount |
| Onboard Multiplexer | Yes | — |
| Pin Compatibility | Pin-for-pin compatible with ADS7841 | — |
| Low-Power Suitability | Designed for battery-operated systems | — |
| Remote Acquisition Suitability | Serial interface supports low-cost isolated data acquisition | — |
| Supply Voltage Range | [DATA_NEEDED: Supply Voltage Range] | — |
| इनपुट वोल्टेज रेंज | [DATA_NEEDED: Input Voltage Range] | — |
| रेफ़रेंस वोल्टेज | [DATA_NEEDED: Reference Voltage] | — |
| Integral Nonlinearity | [DATA_NEEDED: Integral Nonlinearity] | — |
| Differential Nonlinearity | [DATA_NEEDED: Differential Nonlinearity] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS Status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH Status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: Lead-Free Status] | — |
| Converter Type | — | Sampling successive-approximation-register ADC |
| Number of Input Channels | — | 4 single-ended or 2 differential |
| Signal-to-Noise Plus Distortion Ratio | — | 86 dB |
| Input Architecture | — | Onboard 4-channel multiplexer |
| Input Range | — | ±VREF |
| Reference Voltage Range | — | 500 mV to VCC/2 |
| Supply Configuration | — | Single supply |
| Serial Interface | — | Synchronous serial interface |
| Shutdown Mode | — | Supported |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |