ADS8341E vs ADS8343EB Karşılaştırma
Ayrıntılı yan yana karşılaştırma ADS8341E tarafından Texas Instruments ve ADS8343EB tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | ADS8341E | ADS8343EB |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | ADC/DAC | ADC/DAC |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Çözünürlük | 16 bit | 16 bit |
| Input Channels | 4 single-ended or 2 differential channels | — |
| Conversion Rate | 100 kHz | 100 kHz |
| Signal-to-Noise and Distortion Ratio | 86 dB SINAD | — |
| Architecture | Successive-approximation sampling ADC | — |
| Output Interface | Synchronous serial interface | — |
| Typical Supply Condition | 5 V | — |
| Typical Power Dissipation | 8 mW at 100 kHz throughput and 5 V supply | 8 mW at 100 kHz throughput with 5 V supply |
| İşletim Sıcaklığı Aralığı | -40 °C to +85 °C | -40 °C to +85 °C |
| Paket | SSOP-16 | SSOP-16 |
| Montaj Türü | Surface mount | Surface mount |
| Onboard Multiplexer | Yes | — |
| Pin Compatibility | Pin-for-pin compatible with ADS7841 | — |
| Low-Power Suitability | Designed for battery-operated systems | — |
| Remote Acquisition Suitability | Serial interface supports low-cost isolated data acquisition | — |
| Supply Voltage Range | [DATA_NEEDED: Supply Voltage Range] | — |
| Giriş电压范围 | [DATA_NEEDED: Input Voltage Range] | — |
| Referans Gerilimi | [DATA_NEEDED: Reference Voltage] | — |
| Integral Nonlinearity | [DATA_NEEDED: Integral Nonlinearity] | — |
| Differential Nonlinearity | [DATA_NEEDED: Differential Nonlinearity] | — |
| RoHS Durumu | [DATA_NEEDED: RoHS Status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH Status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: Lead-Free Status] | — |
| Converter Type | — | Sampling successive-approximation-register ADC |
| Number of Input Channels | — | 4 single-ended or 2 differential |
| Signal-to-Noise Plus Distortion Ratio | — | 86 dB |
| Input Architecture | — | Onboard 4-channel multiplexer |
| Input Range | — | ±VREF |
| Reference Voltage Range | — | 500 mV to VCC/2 |
| Supply Configuration | — | Single supply |
| Serial Interface | — | Synchronous serial interface |
| Shutdown Mode | — | Supported |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |