AK5558VN vs AK5556VN तुलना
विस्तृत दोनों ओर की तुलना AK5558VN द्वारा AKM और AK5556VN द्वारा Asahi Kasei Microsystems. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | AK5558VN | AK5556VN |
|---|---|---|
| ब्रांड | AKM | Asahi Kasei Microsystems |
| श्रेणी | ADC/DAC | ADC/DAC |
| लाइफसाइकिल स्थिति | सक्रिय | Obsolete |
| रेज़ोल्यूशन | 32-bit | — |
| Number of Channels | 8 | 6 channels |
| Sampling Rate (PCM) | Up to 768 kHz | — |
| DSD Output Rate | Up to 11.2 MHz | — |
| Dynamic Range | 115 dB (single channel), 118 dB (8-to-1 summation) | 115 dB |
| S/(N+D) | 106 dB | — |
| Input Type | Differential analog input | — |
| Digital Filters | 4 selectable (sharp, slow, short-delay, low-latency) | — |
| Audio Interface | TDM, I2S, DSD | — |
| Number of Converters | 1 | — |
| Architecture | Multi-bit Delta-Sigma | — |
| पैकेज | 64-QFN (9x9 mm) with Exposed Pad | 64-QFN (9 x 9 mm) |
| माउंटिंग प्रकार | Surface Mount | Surface mount |
| ऑपरेटिंग तापमान | -40C to +85C [DATA_NEEDED: confirm from datasheet] | — |
| श्रेणी | Audio A/D Converter IC | — |
| ADC Resolution | — | 32 bit |
| Input Architecture | — | Differential input |
| Maximum Sampling Frequency | — | 768 kHz |
| Signal-to-Noise Plus Distortion | — | 106 dB |
| Channel-Summation Dynamic Range | — | 118 dB |
| Integrated Digital Filters | — | 4 selectable types |
| Digital Audio Interface | — | PCM |
| Multichannel Interface | — | TDM |
| DSD Output Support | — | Up to 11.2 MHz |
| Exposed Pad | — | QFN-64-EP (9 x 9 mm) |
| Digital Supply Voltage Range | — | 1.7 V to 1.98 V |
| Analog Supply Voltage Range | — | 3 V to 3.6 V |
| Alternative Supply Voltage Range | — | 5 V |
| RoHS स्थिति | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |