ATMEGA1284P-MUR vs ATMEGA128L-8AI तुलना
विस्तृत दोनों ओर की तुलना ATMEGA1284P-MUR द्वारा Microchip Technology और ATMEGA128L-8AI द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATMEGA1284P-MUR - 8-bit AVR MCU 20MHz 128KB Flash | Microchip
ATMEGA1284P-MUR ✓ सक्रियMicrochip Technology
ATMEGA128L-8AI - 8-bit AVR MCU 8MHz 128KB TQFP-64 | Microchip
ATMEGA128L-8AI ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATMEGA1284P-MUR | ATMEGA128L-8AI |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core | AVR 8-bit RISC | AVR 8-bit RISC |
| Max Clock Frequency | 20 MHz | — |
| Flash Program Memory | 128 KB (64K x 16), In-System Programmable | — |
| SRAM | 16 KB | — |
| EEPROM | 4 KB | — |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7V to 5.5V |
| Throughput | Up to 20 MIPS at 20 MHz | — |
| General Purpose I/O Lines | 32 | — |
| USARTs | 2 | — |
| Timer/Counters | 3 (with compare modes and PWM) | — |
| ADC | 8-channel, 10-bit | 8-channel 10-bit |
| Serial Interfaces | TWI (I2C, byte-oriented), SPI, 2x USART | — |
| Real Time Counter | Yes (RTC) | — |
| Working Registers | 32 x 8 general purpose | — |
| Instructions | 131 instructions, most single-cycle | — |
| Multiplier | On-chip 2-cycle hardware multiplier | — |
| पैकेज | 44-VQFN (7x7 mm), exposed pad | 64-TQFP (14x14 mm) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| Debug / Programming | ISP (In-Circuit Serial Programming), JTAG | — |
| Life Cycle Stage | Active | — |
| Program Memory Size | — | 128KB (64K x 16) Flash |
| Program Memory Type | — | In-System Programmable FLASH |
| RAM Size | — | 4K x 8 SRAM |
| EEPROM Size | — | 4KB |
| Maximum Clock Speed | — | 8MHz |
| MIPS Throughput | — | Up to 8 MIPS at 8MHz (approx. 1 MIPS/MHz) |
| Timers | — | Two 8-bit, two 16-bit |
| Communication Interfaces | — | 2x USART, SPI, TWI (I2C) |
| Debug Interface | — | JTAG (on-chip debug and boundary scan) |
| ऑपरेटिंग तापमान | — | -40C to +85C (industrial, A grade) |
| Number of I/O | — | 53 programmable I/O lines |
| RoHS स्थिति | — | [DATA_NEEDED: RoHS compliance confirmation] |
| MSL स्तर | — | [DATA_NEEDED: moisture sensitivity level] |