ATMEGA32A-PN vs ATMEGA32L-8PC तुलना
विस्तृत दोनों ओर की तुलना ATMEGA32A-PN द्वारा Microchip Technology और ATMEGA32L-8PC द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATMEGA32A-PN - 8-bit AVR MCU 32KB Flash 16MHz 40-DIP | Microchip
ATMEGA32A-PN ✓ सक्रियMicrochip Technology
ATMEGA32L-8PC - 8-Bit AVR MCU 8MHz 32KB Flash 40-PDIP | Microchip
ATMEGA32L-8PC ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATMEGA32A-PN | ATMEGA32L-8PC |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | 8-bit AVR RISC | 8-bit AVR RISC |
| Program Memory (Flash) | 32 KB (16K x 16) | — |
| SRAM | 2 KB | 2 KB |
| EEPROM | 1 KB | 1 KB |
| Maximum CPU Speed | 16 MHz | — |
| Operating Voltage | 4.5 V to 5.5 V | — |
| Number of I/O Pins | 32 | — |
| ADC | 8-channel, 10-bit | 8-channel 10-bit |
| Timers/Counters | Two 8-bit + One 16-bit | — |
| पैकेज | 40-pin PDIP (0.600 in / 15.24 mm) | 40-PDIP (P) |
| माउंटिंग प्रकार | Through-Hole | Through Hole |
| Communication Interfaces | USART, SPI, TWI (I2C) | — |
| Debug Interface | JTAG (IEEE 1149.1) | — |
| Programmable Lock Bits | Yes (software security) | — |
| Flash Endurance | 10,000 write/erase cycles | — |
| EEPROM Endurance | 100,000 write/erase cycles | — |
| ऑपरेटिंग तापमान | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| RoHS स्थिति | Compliant | — |
| अधिकतम क्लॉक फ़्रीक्वेंसी | — | 8 MHz |
| FLASH Program Memory | — | 32 KB (16K x 16) |
| Operating Voltage Range | — | 2.7 V to 5.5 V (ATMEGA32L) |
| Instructions | — | 131 instructions, most single-cycle |
| General Purpose Working Registers | — | 32 x 8-bit |
| General Purpose I/O Lines | — | 32 |
| JTAG Interface | — | On-chip-debug and boundary scan |
| Active Mode Current | — | 1.1 mA (1 MHz, 3 V, 25 C) |
| Idle Mode Current | — | 0.35 mA (1 MHz, 3 V, 25 C) |
| Power-down Mode Current | — | < 1 uA |
| Throughput | — | Up to 8 MIPS at 8 MHz |
| Programmability | — | In-System Programmable (ISP) FLASH, self-programming |